• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.15-21
• /
• 2009

The design of the stud shear connector of a bridge structure is mostly controlled by the fatigue resistance not by the strength, if it is followed by AASHTO LRFD Bridge Design Specification. This fatigue design code in AASHTO LRFD is based on the research work done by Slutter and Fisher in 1966. These tests seemingly underestimated the fatigue resistance of connectors because of the inherent eccentricity of the one-face test setup which results additional tension forces to the stud. In addition, the stress ranges were not plotted in the log scale, because it was not known at that time that the fatigue resistance of the welded steel structures has a linear relationship of log scales of stress range and number of loading cycles. This study evaluates the test data produced by the Slutter and Fischer, and plot the data on the proper manner. The fatigue push-out test data produced recently by many other researches all around the world are gathered and analyzed, furthermore a design curve is recommended.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.79-90
• /
• 2007

Behaviors of instrumented steel sheet piles which are installed in sand ground by vibratory hammer were investigated. Especially, stresses acting on the pile during vibratory driving, efficiency factor which reflects differences between theoretical driving force and actually delivered acting force, justifiability of rigidity of steel sheet pile, dynamic resistance characteristics of soil and penetration characteristics of sheet pile were analysed. According to the field test results it is justifiable that steel sheet pile behaves as a rigid body during vibratory driving. And it can be seen that maximum stress acting on sheet pile section is far less than tensile strength of the material. Value of the maximum section force at sheet pile head was 72% of that estimated from theoretical equation. Magnitudes of displacement amplitudes computed from displacement-time history curve corresponding to four penetration depths were in the range of 16 $\sim$ 75% of that specified by manufacturer.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.59-59
• /
• 2001

전보에서 발표한 바와 같이, 대상 라이너지 제조공장의 습부 운전조건이 지극히 악화되어 있으며 초지 시스템이 지종교체 등의 충격에 전혀 완충작용을 못하는 이유로 는 용수를 포함한 지료의 전하특성을 조절해주지 못하기 때문인 것으로 판단되었다. 특 히 양이온성 고분자로서 유일하게 사용하고 있는 보류향상제가 적절히 작용하지 못하 기 때문에 보류도가 저하되고, 제품내에 보류되지 못한 다량의 미세분이 백수 중에 존 재함으로서 결과적으로 지료의 전기적 특성을 더욱 악화시키는 악순환이 되풀이 되는 것으로 판단되었다. 이와 같이 강하게 음으로 하전된 지료의 전기적 특성을 조절하기 위해서는 양이온성 고분자의 사용량을 증가시키거나 고분자의 전하밀도 또는 분자량을 변화시켜 보는 것이 일반적인 습부첨가제 사용방법이라고 할 수 있다. 따라서 대상 습부공정의 조업조건을 호전시키기 위해서는 적절한 보류향상시스 템의 적용이 가장 시급한 현안이라고 판단되어 선규 보류제의 현장적용시험을 수행한 결과, 백수의 COD와 미세분이 격감하고 탈수성이 향상되어 습부공정의 운전조건이 호 전됨을 관측할 수 있었다. 그러나 2달 이상에 걸친 보류제 현장적용시험 기간 중에 생 산된 라이너지의 제반 물성들은 별다른 변화를 관측할 수 없었다. 이는 적용된 보류제 의 상당 부분이 계내의 미세분과 작용하여 소모되기 때문으로 판단되었다. 본 연구에서는 보류제의 투입 이전에 보류제와는 상대적으로 저분자량과 고 전 하밀도를 가진 고분자 전해질 4종을 사용하여 라이너지 지료의 전하를 중화시키고자 하였으며, 이러한 공정으로 생산된 라이너지의 물성변화를 관측하였다. 물성으로는 파 열강도, 압축강도, 습윤인장강도 및 염료 고착능력 등을 살펴보았다.시아노에틸화한 PYA가 안정된 분자구조를 유지하고 있음을 확인할 수 있었다. 시아노에틸화한 PYA용액의 점탄성 평가를 위하여 storage modulus와 loss modulus 를 분석하였다. 일반적 유변특성 평가 결과 PYA용액은 shear-thinning, pseudoplastic 한 특성을 나타내어 표면사이즈 공정에서의 적용 가능성을 확인할 수 있었다. 사용하는 통계기법 중의 하나인 주성분회귀분석을 실시하였다. 주성분 분석은 여러 개의 반응변수에 대하여 얻어진 다변량 자료의 다차원적인 변 수들을 축소, 요약하는 차원의 단순화와 더불어 서로 상관되어있는 반응변수들 상호간 의 복잡한 구조를 분석하는 기법이다. 본 발표에서는 공정 자료를 활용하여 인공신경망 과 주성분분석을 통해 공정 트러블의 발생에 영향 하는 인자들을 보다 현실적으로 추 정하고, 그 대책을 모색함으로써 이를 최소화할 수 있는 방안을 소개하고자 한다.금 빛 용사 둥과 같은 표면처리를 할 경우임의 소재 표면에 도금 및 용 사에 용이한 재료를 오버레이용접시킨 후 표면처리를 함으로써 보다 고품질의 표면층을 얻기위한 시도가 이루어지고 있다. 따라서 국내, 외의 오버레이 용접기술의 적용현황 및 대표적인 적용사례, 오버레이 용접기술 및 용접재료의 개발현황 둥을 중심으로 살펴봄으로서 아직 국내에서는 널리 알려지지 않은 본 기 술의 활용을 넓이고자 한다. within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭

• Tunnel and Underground Space
• /
• v.33 no.1
• /
• pp.29-41
• /
• 2023

The brittleness of rocks plays an important role in determining the fragmentation and failure behavior of rock. However, there is still no standard method to evaluate the brittleness of rock, and previous studies have suggested the several definitions for estimation of brittleness of rock. Even in the process of mechanical rock excavation and drilling, the brittleness of rock is considered as an important property for evaluating the excavation efficiency of mechanical excavators or boreability of rock. The previous studies have been carried out to investigate the correlation between different brittleness of rock and cutting efficiency and boreability of rock. This study introduced a method for calculating the brittleness of rock from punch penetration test, and analyzed the correlation between the brittleness of rock calculated by the uniaxial compressive and Brazilian tensile strengths and that from punch penetration test. From the results of correlation analysis, the relationship between various brittleness was confirmed, and it was found that PSI and BI₃ showed a good correlation with the strength-based brittleness index. In addition, the results indicated that B₃ and B₄ are suitable to represent the brittleness of rock in the field of mechanical rock excavation.

• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.121-130
• /
• 2007

To investigate the enhancement in strength and deformation capacities of concrete confined by FRP composites, tests under axial loads were carried out on three groups of thirty six short columns in circular section with diverse GFRP confining reinforcement. The major test variables considered include fiber content or orientation, wrap or tube type by varying the end loading condition, and continuous or discontinuous confinement depending on the presence of vortical spices between its two halves. The circumferential FRP strains at failure for different types of confinements were also investigated with emphasis. Various analytical models capable of predicting the ultimate strength and strain of the confined concrete were examined by comparing to observed results. Tests results showed that FRP wraps or tubes provide the substantial increase in strength and deformation, while partial wraps comprising the vertical discontinuities fail in an explosive manner with less increase in strength, particularly in deformation. A bilinear stress-strain response was observed throughout all tests with some variations of strain hardening. The failure hoop strains measured on the FRP surface were less than those obtained from the tensile coupons in all tests with a high degree of variation. In overall, existing predictive equations overestimated ultimate strengths and strains observed in present tests, with a much larger scatter related to the latter. For more accuracy, two simple design- oriented equations correlated with present tests are proposed. The strength equation was derived using the Mohr-Coulomb failure criterion, whereas the strain equation was based on entirely fitting of test data including the unconfined concrete strength as one of governing factors.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.2
• /
• pp.47-51
• /
• 2017

In this study, the optimization algorithm by inverse analysis that is the core of the adaptive management technique was adopted to update the soil engineering properties based on the ground response during the construction. Adaptive management technique is the framework wherein construction and design procedures are adjusted based on observations and measurements made as construction proceeds. To evaluate the performance of the adaptive management technique, the numerical simulation for the triaxial tests and the synthetic deep excavation were conducted with the Hardening Soil model. To effectively conduct the analysis, the effective parameters among the parameters employed in the model were selected based on the composite scaled sensitivity analysis. The results from the undrained triaxial tests performed with soft Chicago clays were used for the parameter calibration. The simulation for the synthetic deep excavation were conducted assuming that the soil engineering parameters obtained from the triaxial simulation represent the actual field condition. These values were used as the reference values. The observation for the synthetic deep excavation simulations was the horizontal displacement of the support wall that has the highest composite scaled sensitivity among the other possible observations. It was found that the horizontal displacement of the support wall with the various initial soil properties were converged to the reference displacement by using the adaptive management technique.

• Journal of the Korea Concrete Institute
• /
• v.16 no.4 s.82
• /
• pp.529-539
• /
• 2004

The corrosion of steel rebars has been the major cause of reinforced concrete deterioration. FRP(Fiber-reinforced polymer) rebar has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. However, FRP rebar is prone to deteriorate due to other degradation mechanisms than those for steel. The high alkalinity of concrete, for instance, is a possible degradation source. Therefore, the USA, Japan, Canada, UK. etc are using environmental reduction factor. Although difference design guidelines were drawn in many, including USA, Japan, Canada, UK etc, recommendations and coefficients that could take into account the long-term behavior of FRP reinforcement were not well defined. This study focuses on recommendation of environmental reduction factor of FRP rebar. Environment reduction factor were decided using durability test result. FRP rebars were subjected to twelve type of exposure conditions including alkaline solution, acid solution, salt solution and deionized water etc. The water absorption behavior was observed by means of simple gravimetric measurements and durability properties were investigated by performing tensile, compressive and short beam tests. Based on the experimental result, environmental reduction factor of hybrid FRP rebar(A), and (C) and CFRP rebar was decided as 0.85. Also, hybrid FRP rebar(B) and GFRP rebar were decided as 0.7 for the environmental reduction factor

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.103-112
• /
• 1995

Six African rice varieties, two each from three types having the characteristics of partially, irregularly, and completely developed abscission layers, were selected and grown 1） to investi-gate the histological differences during the formation and development of the abscission layers and 2） to evaluate the changes in the breaking tensile strength required to detach a grain from its pedicel dur-ing ripening period in relation with developmental stage of the abscission layers. In African rice, the panicle and spikelet grew rapidly from 15 days before heading and almost completely grown in length at five days before heading. The abscission regions were recognized at 15 days before heading. However, any apparently developed abscission layers were not recognized in the lemma side for partially developed abscission layers. A group of parenchymatous cells could be observed sporadically in the abscission layers of the lemma side for irregularly developed ab-scission layers. At ten days before heading, abscission layers consisting of one or two layers of parenchymatous cells were clearly distinguished from neighboring cells due to thickened and lignified cell walls. There were a number of individual parenchymatous cells scattered sporadically in the lemma side of partially developed abscission layers, and a number of grouped parenchymatous cells scattered randomly in the lemma side of irregularly developed abscission layers. At two weeks after heading, the grains became almost fully filled. The cracking of abscission layers between rachilla and pedicel was observed, and the breaking tensile strength required to detach a grain from its pedicel was as low as that at harvest time.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.67-78
• /
• 2004

Soil-steel bridges are made of flexible corrugated steel plates buried in the well-compacted granular soil. One kind of possible collapses of these structures could be initiated by shear or tension failure in the soil cover subjected to vehicle loads. Current design codes provide the requirements for the minimum depth of the soil cover to avoid problems associated with soil cover failures. However, these requirements were developed for short span (less than 7.7 m) structures which are made of unstiffened plates of standard corrugation (150$\times$50 m). Numerical analyses were carried out to investigate the behavior of long span soil steel bridges according to thickness of the soil cover. The span of structures were up to 20 m and deep corrugated plates (381$\times$140 m) were used. The analysis showed that the minimum cover depth of 1.5 m could be sufficient to prevent the soil cover failure in the structures with a span exceeding 10 m. Additional analyses were performed to verify the reinforcement effect of the concrete relieving slab which can be a special feature to reduce the live-load effects. Analyses revealed that the bending moment of the conduit wall with a relieving slab was less than 20% of that without a relieving slab in a case of shallow soil cover conditions.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.23-23
• /
• 2010

마찰교반접합(Friction Stir Welding)은 1991년 영국 TWI에서 개발된 접합 법으로서 일정한 속도로 회전하는 툴이 재료내부에 삽입 되면서 툴과 재료사이에서 마찰열이 발생하여 연화된 재료와 접합 툴 사이에서의 기계적 교반에 의해 소성변형이 일어남과 동시에 접합이 이루어진다. 마찰교반접합은 동적 재결정에 의한 접합부의 미세한 결정립 형성으로 인하여 기계적 특성이 향상되며 보호 가스가 필요 없어 친환경적임과 동시에 용융 용접 법에 비해 접합 시 에너지 소모가 적다는 장점이 있다. 마찰교반접합은 기존의 저융점 재료에 관한 접합을 넘어서 최근에는 철계 합금, 타이타늄 합금, 니켈계 합금 등 고융점 재료에서의 적용에 관한 연구가 이루어지고 있다. 하지만 마찰교반접합을 이용하여 위와 같은 강한 재료를 접합하기 위해서는 내구성이 갖추어진 툴이 반드시 수반된다. 슈퍼 오스테나이트계 스테인리스강은 염화물의 농도가 높은 부식 환경에 적용되는 소재로서, 공식(pitting corrosion) 및 틈부식 (crevice corrosion)에 대한 내식성을 높이기 위하여 Mo의 함량을 6%로 낮추고 20~25% Cr과 Ni을 첨가하여 사용된다. 이러한 고합금의 슈퍼 오스테나이트계 스테인리스강은 여타 내식성 합금에 비하여 내식성이 매우 우수한 것으로 알려져 있다. 최근 SO2 배출에 대하여 규제가 강화되면서 화력 발전소용 탈황 설비 중 일부 장비에서 6% Mo가 첨가된 슈퍼 오스테나이트계 스테인리스강의 사용이 늘어나고 있다. 본 연구에서는 $Si_3N_4$ 툴을 사용하여 Mo이 6% 첨가된 슈퍼 오스테나이트계 스테인리스강인 1925hMo강을 마찰교반접합하였다. 툴 회전속도 (200rpm, 300rpm, 460rpm, 700rpm)를 변수로 하여 접합을 실시하였다. 접합 후 외관상태를 점검하였으며 광학현미경 (optical microscope)과 주사전자현미경 (scanning electron microscope)을 사용하여 미세조직 관찰을 하였으며 경도 및 인장강도 측정 등의 실험을 통하여 접합부의 기계적 특성을 평가하였다. 그 후 이러한 결과를 통하여 미세조직과 기계적 특성과의 관련성을 조사하였다.