• NEWSLETTER 전기공업
• /
• no.92-10 s.53
• /
• pp.1-20
• /
• 1992

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.11-19
• /
• 1999

Farmer 모델은 시스템 개체구조(System Entity Structure)의 개념을 도입한 지식표현을 위해 사용되는 프레임 구조모델로서 다중성 추상화 개념(Multiplicity Instance Concept)은 하나의 개체를 구성하기 위하여 동일한 형태의 구성요소가 여러 번 발생하는 경우에 이의 대표적인 요소만을 표시하는 추상화 개념이다. 다중성 추상화 개념에서 정의된 대표개체는 자신의 인스턴스들을 가질수 있다. 이들 인스턴스들은 IM-컴포넌트 타입 개체노드 및 OM-컴포넌트 타입 개체노드이며 다중성 인스턴스 링크를 이용하여 대표개체와 연결된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.633-635
• /
• 1998

Farmer 모델에서 지원하는 다중성(multiplicity)은 하나의 개체를 구성하기 위하여 동일한 형태의 구성요소가 여러 번 발생하는 경우에 이의 대표적인 요소만을 표시하는 추상화 개념으로서 Farmer 모델에서만 지원하는 독특한 추상화 개념이다. 다중성 추상화 개념에서 정의된 대표개체는 자신의 인스턴스들을 가질 수 있다. 이들 인스턴스들은 IM-컴포넌트 타입 개체 노드 및 OM-컴포넌트 타입 개체 노드이며 다중성 인스턴스 링크를 이용하여 대표개체와 연결된다. 본 논문에서는 다중성 추상화 개념과 다중성 인스턴스 링크의 정의 및 예를 제시하며 실제 Farmer 모델링 알고리즘내에서 다중성 인스턴스 링크의 개념을 다중성 매핑 알고리즘을 통하여 구체화시켰다.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.118-118
• /
• 2009

자동차의 경량화, 안전성 그리고 내식성 향상을 위하여 고강도 강판 및 도금 강판의 적용이 증가하면서 자동차 산업의 많은 부분에서 적용되는 저항 점용접에서도 고강도 강판과 도금강판의 적용이 증가하는 추세이다. 이에 따라 고강도 강판과 도금 강판의 낮은 용접성을 개선하기 위하여 기존의 단상 AC 용접기에서 전류 파형의 형태를 개선한 인버터 DC 용접기가 차체 조립라인에서 많이 사용되고 있다. 본 연구에서는 고강도 강판의 저항 점용접의 연속타점 시 단상 AC용접기와 인버터 DC용접기의 전극의 연속타점 수명의 차이를 비교하고 분석하기 위해 590MPa 급 전기아연도금강판을 이용하여 AWS 규격에 연속타점실험을 기준으로 단상 AC 와 인버터 DC 용접기의 연속타점 실험을 실시하였다. 연속타점실험 중에 전극의 형상관찰을 위해 100타점 간격으로 carbon paper를 이용해 전극 직경 변화를 관찰 하였으며, 100 타점간격으로 동저항을 측정하고 인장 전단 시편과 Peel test 시편을 제작하여 연속타점 시 단상 AC와 인버터 DC 용접기의 저항 점용접 연속타점 수명을 비교 분석하였다. 그리고 연속타점 실험 후 사용된 전극의 표면과 단면 형상을 각각 OM, SEM, EDX로 분석하여 전극 표면의 Zn과 합금화 된 전극의 합금층을 분석하였다. 그 결과 590MPa급 전기아연도금강판의 저항 점용점 연속타점 수명평가에서 인버터 DC 용접기가 단상 AC 용접기보다 200타점 더 우수한 연속타점 수명을 보유하였다. 특히 인장강도 기준 측면에서는 인버터 DC 용접기의 전극 연속타점수명은 매우 우수하다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.10-16
• /
• 1991

Mean values and the relative contribution of OM and clay to total CEC for soil textural classes were obtained from the analytical results of the typical profiles(sample size : 3,182) which were described by the detailed soil maps througthout Korea with an exception of Jeju island. The results are below. 1. Mean values of the soil CEC were 2.9 for S, 4.7 for LS, 6.7 for SL, 9.0 for L, 10.2 for SiL, 10.7 for CL, 8.6 for SCL, 12.2 for SiCL, 16.1 for SiC, and 17.4me/100gr for C, respectively. 2. The multiple regression equation and partial regression coefficient tended to show that OM and clay had the highly significant effect on CEC. 3. Clay content of the coarse, moderately coarse, and moderately fine soil was 1.10 to 1.89 times as important as OM content whereas OM of the medium and fine soil 1.09 to 2.94 times as important as clay in predicting CEC. 4. Mean values of CEC of the humus and clay in Korean soils were about 62.9 and 24.0me/100gr, respectively.

• Korean Journal of Microbiology
• /
• v.51 no.2
• /
• pp.97-107
• /
• 2015

Wetlands constitute a transitional zone between terrestrial and aquatic ecosystems and have unique characteristics such as frequent inundation, inflow of nutrients from terrestrial ecosystems, presence of plants adapted to grow in water, and soil that is occasionally oxygen deficient due to saturation. These characteristics and the presence of vegetation determine physical and chemical properties that affect decomposition rates of organic matter (OM). Decomposition of OM is associated with activities of various extracellular enzymes (EE) produced by bacteria and fungi. Extracellular enzymes convert macromolecules to simple compounds such as labile organic carbon (C), nitrogen (N), phosphorus (P), and sulfur (S) that can be easily taken up by microbes and plants. Therefore, the enzymatic approach is helpful to understand the decomposition rates of OM and nutrient cycling in wetland soils. This paper reviews the physical and biogeochemical factors that regulate extracellular enzyme activities (EEa) in wetland soils, including those of ${\beta}$-glucosidase, ${\beta}$-N-acetylglucosaminidase, phosphatase, arylsulfatase, and phenol oxidase that decompose organic matter and release C, N, P, and S nutrients for microbial and plant growths. Effects of pH, water table, and particle size of OM on EEa were not significantly different among sites, whereas the influence of temperature on EEa varied depending on microbial acclimation to extreme temperatures. Addition of C, N, or P affected EEa differently depending on the nutrient state, C:N ratio, limiting factors, and types of enzymes of wetland soils. Substrate quality influenced EEa more significantly than did other factors. Also, drainage of wetland and increased temperature due to global climate change can stimulate phenol oxidase activity, and anthropogenic N deposition can enhance the hydrolytic EEa; these effects increase OM decomposition rates and emissions of $CO_2$ and $CH_4$ from wetland systems. The researches on the relationship between microbial structures and EE functions, and environmental factors controlling EEa can be helpful to manipulate wetland ecosystems for treating pollutants and to monitor wetland ecosystem services.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.4
• /
• pp.235-244
• /
• 1976

Following results are obtained by re-evaluating N. P. K. and soil improvement trials conducted from 1964 to 1969 in valley paddy soils in rolling lands (Jisan-series, imperfectly drained and Yongji-series, moderately well drained). 1. Average grain yield of rice in no fertilizer plots and the highest yield plots for Yongji-series (31 experiments) were 319 and 507kg/10a respectively, and that of Jisan-series (15 experiments) were 396 and 567kg/10a respectively. The fertility difference between two series may have been a result of the cultivation history. Jisan-series is a mature soil which has a long cultivation history and Yongji-series is sub-mature soil 2. Soil chemical characteristics for Jisan-series are charaterized by 12.8meq/100g in CEC, 6.5meq/100g in exchangeable Ca, 3.9% in OM, and 64 ppm in available $P_2O_5$ For Yongji-series they were 10.4meq/100g in CEC, 4.7meq/100g in exchangeable Ca, 3.2% in OM and 103ppm in available $P_2O_5$. 3. Deep plowing and application of organic matter and lime are expected to be effective in increasing fertility level of soils of Yongji-series. The same will be effective in some soils of Jisan series where the fertility level is low. 4. Jisan-series shows high response to nitrogen, while Yongji series shows sharp decrease in rice yield at the high levels of nitrogen. Both series, however, showed high response to nitrogen only when the OM level was higher than 3%. 5. The optimum level of nitrogen was 8~9kg for Jisan-series, and 10~11kg/10a for Yongji-series. The yield increase per kg of applied nitrogen was 12kg for Jisan-series and 13kg for Yongji series. 6. The optimum level of phosphorus at the optimum level of nitrogen was 6kg/10a for Yongji-series and 3kg/10a for Jisan-series. The optimum level of phosphorus, however, was different depending upon the nitrogen level. It was assumed that Yongji-series required more fertilizer (available $P_2O_5$ was 110ppm) than Jisan-series (available $P_2O_5$ was 64ppm) because the availability of P was higher in Jisan-series than Yongji-series due to the severe reduction of Jisan-series. 7. The response of potassium was also depending upon the nitrogen level. In Yongji-series the potassium response at 8kg/10a nitrogen level decreased with increasing levels of potassium, but the higher level of introgen, potassium response was also higher. In Jisan-series potassium response was recognized at all nitrogen levels. The optimum level of potassium at the optimum level of nitrogen was 8kg/10a in both serieses. 8. The reasonable ratio of NPK fertilizer seems to be 1:0.6:0.6:for Yongji-series and 1:0.4:1 for Jisan-series as N:$P_2O_5$:K.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.199-203
• /
• 2005

One of the most important hydrological response characteristics is the lag time. It is well known as being under the influence of the morphometric properties of the basin, which could be expressed by catchment shape descriptors. In this paper, the geometric characteristics of an equivalent ellipse proposed by Moussa(2003) is applied for the lag time analysis. The lag time is obtained from the rainfall-runoff observed data by the method of moments suggested by Nash(1960) and the relationships between the basin morphometric properties and the lag time are discussed as applied to 3 catchments in Korea. Additionally, the shapes of equivalent ellipse are examined how they are transformed from upstream area to downstream one. As a result, the relationship between descriptors based on a equivalent ellipse a+b and $a+b+{\epsilon}OM$, and the lag time is shown to be close and the shape of ellipse is presented to approach a circle along the river downwards. Also, the notion of compactness which is used to express the shape of an irregular plan-form is tried to apply.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.82-82
• /
• 2010

표면실장 공법을 통해 CSP 패키지를 보드에 실장 하는데 있어 무연솔더 접합부의 신뢰성에 영향을 미치는 인자 중 가장 중요한 것은 접합부에 형성되는 IMC (Intermetallic compound, 금속간화합물)인 것으로 알려져 있다. 접합부의 칩 부분에는 솔더와 칩의 UBM (Under bump metalization)이 접합하여 IMC가 형성되나, 보드 부분에는 솔더와 보드의 UBM 뿐만 아니라 그 사이에 솔더 페이스트가 함께 접합되어 IMC가 형성된다. 본 연구에서는 패키지의 신뢰성 연구를 위해 솔더 페이스트의 유무 및 두께에 따른 무연 솔더 접합부의 미세조직의 변화를 분석하였다. 본 실험에서는 Sn-3.0(Wt.%)Ag-0.5Cu 조성과 본 연구진에 의해 개발된 Sn-Ag-Cu-In 조성의 직경 $450{\mu}m$ 솔더 볼을 사용하였으며, 솔더 페이스트는 상용 Sn-3.0Ag-0.5Cu (ALPHA OM-325)를 사용하였다. 칩은 ENIG (Electroless nickel immersion gold) finish pad가 형성된 CSP (Chip scale package)를, 보드는 OSP (Organic solderability preservative)/Cu finish pad가 형성된 것을 사용하였다. 실험 방법은 보드를 솔더 페이스트 없이 플라즈마 처리 한 것, 솔더 페이스트를 $30{\mu}m$ 두께로 인쇄한 것, $120{\mu}m$의 두께로 인쇄한 것, 이렇게 3가지 조건으로 준비한 후, 솔더 볼이 bumping된 칩을 mounting하여, $242^{\circ}C$의 peak 온도 조건의 oven(1809UL, Heller)에서 reflow를 실시하여 패키지를 형성하였다. 이후 시편은 정밀 연마한 후, OM(Optical Microscopic)과 SEM(scanning electron microscope) 및 EDS(energy dispersive spectroscope)를 사용하여 솔더 접합부 IMC의 미세조직을 관찰, 분석하였다.

• Journal of Korean Society of Forest Science
• /
• v.37 no.1
• /
• pp.41-56
• /
• 1978

This experimentation aims to study on the characterics of tree growth by forestry land soil system and the effect of applied fertilizer by kind of tree for obtaining basic data on application of fertilizer to forestry land and to further investigate the restriction factor of tree growth by soil system for promoting more effective application of fertilizer to forestry area. 1. The characteristics of tree growth by soil system showed that tree growth was worst on erosive soil, bad on red or red and yellow soil and generally good on brown soil. 2. With regard to Black Locust, the restriction factor of its growth appeared the content of $P_2O_5$ in the soil and the less the content of $P_2O_5$ is in the soil, the worse its growth was and its growth was bad on clay soil. 3. The growth of pinus seems closely related with the content of $K_2O$ in the soil and the growth of PH was bad on neutral or alkali soil and good on weak-acid soil. Its growth greatly depended upon the content of OM or FN. 4. As Suwon Poplar is a kind of tree requiring for a special soil, its growth required for fertile soil and the content of O. MN $P_2O_5$ $K_2O$ was proportional to its growth. 5. The growth of Black Locust, pinus and Suwon Poplar was good on the soil containing much sand but bad on the soil containing much clay.