• Title/Summary/Keyword: 인식율

Search Result 1,691, Processing Time 0.034 seconds

Analysis of Soil Changes in Vegetable LID Facilities (식생형 LID 시설의 내부 토양 변화 분석)

  • Lee, Seungjae;Yoon, Yeo-jin
    • Journal of Wetlands Research
    • /
    • v.24 no.3
    • /
    • pp.204-212
    • /
    • 2022
  • The LID technique began to be applied in Korea after 2009, and LID facilities are installed and operated for rainwater management in business districts such as the Ministry of Environment, the Ministry of Land, Infrastructure and Transport, and LH Corporation, public institutions, commercial land, housing, parks, and schools. However, looking at domestic cases, the application cases and operation periods are insufficient compared to those outside the country, so appropriate design standards and measures for operation and maintenance are insufficient. In particular, LID facilities constructed using LID techniques need to maintain the environment inside LID facilities because hydrological and environmental effects are expressed by material circulation and energy flow. The LID facility is designed with the treatment capacity planned for the water circulation target, and the proper maintenance, vegetation, and soil conditions are periodically identified, and the efficiency is maintained as much as possible. In other words, the soil created in LID is a very important design element because LID facilities are expected to have effects such as water pollution reduction, flood reduction, water resource acquisition, and temperature reduction while increasing water storage and penetration capacity through water circulation construction. In order to maintain and manage the functions of LID facilities accurately, the current state of the facilities and the cycle of replacement and maintenance should be accurately known through various quantitative data such as soil contamination, snow removal effects, and vegetation criteria. This study was conducted to investigate the current status of LID facilities installed in Korea from 2009 to 2020, and analyze soil changes through the continuity and current status of LID facilities applied over the past 10 years after collecting soil samples from the soil layer. Through analysis of Saturn, organic matter, hardness, water contents, pH, electrical conductivity, and salt, some vegetation-type LID facilities more than 5 to 7 years after construction showed results corresponding to the lower grade of landscape design. Facilities below the lower level can be recognized as a point of time when maintenance is necessary in a state that may cause problems in soil permeability and vegetation growth. Accordingly, it was found that LID facilities should be managed through soil replacement and replacement.

Current Status of Sericulture and Insect Industry to Respond to Human Survival Crisis (인류의 생존 위기 대응을 위한 양잠과 곤충 산업의 현황)

  • A-Young, Kim;Kee-Young, Kim;Hee Jung, Choi;Hyun Woo, Park;Young Ho, Koh
    • Korean journal of applied entomology
    • /
    • v.61 no.4
    • /
    • pp.605-614
    • /
    • 2022
  • Two major problems currently threaten human survival on Earth: climate change and the rapid aging of the population in developed countries. Climate change is a result of the increase in greenhouse gas (GHG) concentrations in the atmosphere due to the increase in the use of fossil fuels owing to economic and transportation development. The rapid increase in the age of the population is a result of the rise in life expectancy due to the development of biomedical science and technology and the improvement of personal hygiene in developed countries. To avoid irreversible global climate change, it is necessary to quickly transition from the current fossil fuel-based economy to a zero-carbon renewable energy-based economy that does not emit GHGs. To achieve this goal, the dairy and livestock industry, which generates the most GHGs in the agricultural sector, must transition to using low-carbon emission production methods while simultaneously increasing consumers' preference for low-carbon diets. Although 77% of currently available arable land globally is used to produce livestock feed, only 37% and 18% of the proteins and calories that humans consume come from dairy and livestock farming and industry. Therefore, using edible insects as a protein source represents a good alternative, as it generates less GHG and reduces water consumption and breeding space while ensuring a higher feed conversion rate than that of livestock. Additionally, utilizing the functionality of medicinal insects, such as silkworms, which have been proven to have certain health enhancement effects, it is possible to develop functional foods that can prevent or delay the onset of currently incurable degenerative diseases that occur more frequently in the elderly. Insects are among the first animals to have appeared on Earth, and regardless of whether humans survive, they will continue to adapt, evolve, and thrive. Therefore, the use of various edible and medicinal insects, including silkworms, in industry will provide an important foundation for human survival and prosperity on Earth in the near future by resolving the current two major problems.

A New way of the Measuring of Innovative Growth: Growth Accounting Model vs Schumpeterian Technological Change Model (혁신성장 측정에 관한 연구: 성장회계모형 vs 슘페테리안 기술변화 모형)

  • Myung-Joong Kwon;Sang-Hyuk Cho;Mikyung Yun
    • Journal of Technology Innovation
    • /
    • v.31 no.1
    • /
    • pp.105-148
    • /
    • 2023
  • This paper provides a new method of measuring the degree of technological progress which contributes to real economic growth based on Schumpeter's Trilogy. Using Microdata of Statistics Korea, the results of measuring and comparing the actual growth contribution of technological progress during the period 2003-2018 by the total factor productivity growth rate(growth accounting method), the R&D investment contribution rate, and the Schumpeterian innovation growth rate, respectively are as follows. First, the measurement of the real growth contribution of technological progress by the growth rate of total factor productivity and the growth rate of Schumpeterian innovation shows contradictory results. Second, when the growth rate of production is in a decreasing trend, the difference between the growth rate of production and the growth rate of total factor productivity increases compared to when it is in an increasing trend. Conversely, when there is an increasing trend, the difference between the growth rate of production and the growth rate of total factor productivity becomes smaller compared to when it is in a decreasing trend.. Third, the technological opportunity that affects the innovation growth rate, i.e., the contribution of R&D incentives to innovative growth is only 3.3%. The reason why this result is different from the existing perception of the contribution of technological progress to growth is that different entities are being measured while measuring the same term of technological progress. Therefore, the growth rate of total factor productivity should be used to measure macroeconomic efficiency, R&D investment should be used to measure the effectiveness of new technology supply, and the Schumpeterian innovation rate should be used to measure the economic impact of technological progress. The policy implications of the research results of this thesis are as follows: ① Transition from a policy of one-sided technology supply to a policy of convergence of technology supply and new technology demand support, ② Mission-oriented R&D policy and R&D policy that links national R&D with private R&D, ③ Reclassification of capital goods reflecting the degree of new knowledge.

Success Strategy of Yuhan-Kimberly's Huggies Magic Panty through Product Repositioning (제품 리포지셔닝을 통한 유한킴벌리 <하기스 매직팬티>의 성공전략)

  • Park, Heung Soo;Choi, Sun-Mi;Kang, Seong Ho;Kwon, Gae Eun
    • Asia Marketing Journal
    • /
    • v.11 no.3
    • /
    • pp.185-203
    • /
    • 2009
  • Yuhan Kimberly, a joint-venture company of Korean Yuhan Company and American Kimberly-Clark, opened a premium diaper market in Korea by launching Pull-Ups which was pants-typed diapers in 1993. Pull-Ups was imported as finished goods from Kimberly-Clark. However, in spite of its huge market share in United States, it failed to land down in Korean market because of wrong positioning strategy which did not consider domestic customers' tastes. In 1996, Yuhan-Kimberly brought out a pants-typed diaper, Huggies-Toddler, to Korean market again. This paved the way for the combination of Kimberly-Clark's production power and Yuhan-Kimberly's marketing power and led to launch new product superior to Pull-Ups. However, this product was unsuccessful in the market because of wrong positioning which did not catch domestic customer's life styles such as cultural, environmental and habitual differences in toilet training, the cost increase coming from IMF crisis in Korea, weak trust within the company, weak trust within the company, and too much higher price than regular diapers. In 2005, Yuhan-Kimberly redeveloped new pants market business strategy. It was organically combined with winning product development plan, winning communication strategy and the market structure change through the pants market creation. Customer's habit, usage and attitude were studied with total 55 times market investigations. Also, all processes from planning to designing were executed in the customer's view by investigating product research, positioning research and advertisement research. Yuhan-Kimberly repositioned new product as a wearing diaper not as a toilet training diaper and launched Huggies Magic Panty as a premium product which had 25% higher price than previous Huggies. Huggies Magic Panty was recognized as a great hit product in domestic diaper market and the sales recorded 37.6 bill won in 2006, 57.2 bill won in 2007, and 90 bill won in 2008 since launching in 2005. The reason of Huggies Magic Panty's success was the repositioning strategy deduced from the precise check of customer's usage habit. It was the winning strategy of Huggies that were market investigation in order to survive in domestic baby goods market where a lot of companies struggled intensively, the exact positioning based on its market investigation and aggressive 360 degree communication strategy to give customers impressions efficiently.

  • PDF

A study on food behavior to related health and daily food intakes of female dormitory students according to BMI (체격지수에 따른 기숙사 여대생의 건강과 관련된 식행동과 영양소 섭취량에 대한 연구)

  • 강금지
    • Korean journal of food and cookery science
    • /
    • v.17 no.1
    • /
    • pp.43-54
    • /
    • 2001
  • This study was to investigate the behavior related to health, food habits, food consumption pattern and nutrient intakes of female students who residing in dormitory(self cooking) according to BMI(Body Mass Index). This study was carried out by questionnaired on June, 2000. Three hundred nine students were answered. The results were as follows: 1. The means of height, weight and BMI were 162.37$\pm$4.36cm, 52.48$\pm$5.54kg and 19.89$\pm$1.89. Under 20 of BMI among students were 53.1% and 20-25 of BMI were 46.9% of students. 2. In the self recognition of body shape, 63.4% of under weight subjects answered that their weight were normal. 73.1% of normal weight regard themselves more obese than their actual body shape normally shows. 51.2% of under weight subjects had attempted to control their weight. This results suggest that their weight control attempts were unnecessary. 3. 81.4% of subjects were answered irregular meals regardless BMI. 89.6% of subjects skipped breakfast. The main reasons were due to lack of time or not to eat proper food. Under weight subjects had less snack than normal weight subjects did(p '||'&'||'lt; 0.05). Normal weight subjects had more bun and cake than under weight subjects(p '||'&'||'gt; 0.05). 4. The consumption of vegetables and fruits were low regardless BMI. Mean energy, protein, Fe, Vit A, B$_1$, B$_2$, niacin, Vit C were above 75% of RDA, except calcium, in subjects. This study suggest that a comprehensive nutrition education program is need for college student in dormitory to improve their eating habits about skipping meal and breakfast and to increase the consumption of vegetables and fruits.

  • PDF

The Effect of Seminal Plasma on Chilling and Freezing of Canine Spermatozoa (개 정액의 정장이 개정자의 냉각과 동결에 미치는 영향)

  • You, Myung-Jo;Lee, John-Hwa;Kim, In-Shik;Park, Jin-Ho;Kwon, Jung-Kee;Kim, Jong-Hoon;Kim, Bum-Seok;Yu, Il-Jeoung
    • Journal of Veterinary Clinics
    • /
    • v.24 no.4
    • /
    • pp.486-492
    • /
    • 2007
  • Seminal plasma(SP) is usually removed from semen that is to be cryopreserved. However, some reports indicate that SP has beneficial effects on spermatozoa during chilling and freezing. The purpose of this study was to determine the effect of SP on sperm survival by adding SP to the extender before cooling and freezing canine spermatozoa. In replicate experiments, ejaculates obtained from four healthy dogs(1-4 years old) of various breeds were pooled, centrifuged at $300{\times}g$ for 10 min at $25^{\circ}C$, and the supernatant of seminal plasma was decanted. Spermatozoa were suspended in egg yolk-Tris(EYT) buffer. The study comprised two experiments: [Exp 1] Sperm were suspended in EYT extender containing either 0, 20, 40, 80 or 100% SP and were slowly cooled to $4^{\circ}C$ for 2h or held at $25^{\circ}C$ as controls. Sperm concentration was adjusted to $2{\times}10^8/ml$. [Exp II] Sperm samples, each of which contained $1{\times}10^8/ml$, were assigned to nine groups to be frozen. In the first four groups, sperm in EYT containing either 20, 40, 80 or 100% SP were cooled to $4^{\circ}C$, then diluted to contain final concentrations of EYT+0.6M glycerol and then were frozen. The final concentrations of SP were 10, 20, 40 or 50%. In the other four groups, sperm in EYT alone were first cooled slowly to $4^{\circ}C$, then diluted to contain final concentrations of EYT+0.6M glycerol plus 10, 20, 40 or 50% SP and then were frozen. Spermatozoa, which chilled in EYT alone and diluted to contain final concentrations of EYT+0.6M glycerol without seminal plasma, and then frozen, was regarded as control. Spermatozoa were frozen at $25^{\circ}C/min$ of cooling rate in plastic straws that were suspended above liquid nitrogen and thawed in water at $38^{\circ}C$ for 1 min. Sperm survival was assayed by determining progressive motility and integrity of plasma and acrosome membranes. Progressive motility was determined by microscopic examination at $200{\times}$ magnification. Membrane integrity was assessed by use of a double fluorescent dye, and acrosome integrity by staining sperm with Pisum sativum agglutinin. The results of the first experiment showed that adding SP did not improve motility of spermatozoa compared to those incubated without SP regardless of temperature. The results of the second experiment showed that spermatozoa suspended in EYT+0.6M glycerol containing SP exhibited the higher progressive motility before being frozen(P<0.05). However, frozen-thawed spermatozoa that had suspended in EYT+0.6M glycerol containing SP showed the similar or lower viability(P<0.05). In summary, although seminal plasma did not affect spermatozoa that were chilled in EYT without cryoprotectant(CPA), addition of seminal plasma to EYT containing CPA did significantly improved progressive motility of canine spermatozoa that were chilled.

The Changes of Plasma Catecholamines Concentration during Waking and Sleep in Obstructive Sleep Apnea Syndrome Patients with Systemic Hypertension (전신성 고혈압을 동반한 폐쇄성 수면 무호흡증후군 환자에서 각성시와 수면중의 혈장 Catecholamines 농도 변화)

  • Moon, Hwa Sik;Lo, Dae Guen;Choi, Young Mee;Kim, Young Kyoon;Kim, Kwan Hyoung;Song, Jeong Sup;Park, Sung Hak
    • Tuberculosis and Respiratory Diseases
    • /
    • v.43 no.4
    • /
    • pp.600-612
    • /
    • 1996
  • Background : Recent studies deported that untreated patients with obstructive sleep apnea syndrome had high long-term mortality rates, and cardiovascular complications of these patients clad a major effect on mortality. Several data indicates that obstructive sheep apnea syndrome contributes to the development of diurnal systemic hypertension. But the pathophysiological mechanism of the development of systemic hypertension in these patients is still uncertain. This study was performed to evaluate the possible role of sympathetic nervous system activity for the development of systemic hypertension in patients with obstructive sleep apnea syndrome. Method : 35 patients with obstructive sleep apnea syndrome(OSAS) and 13 Control subjects(control) were included in this study. 21 patients of OSAS were normotensives(OSAS-NBP), and 14 patients of OSAS were hypertensives(OSAS-HBP). Full night polysomnography was undertaken to all subjects. We measured plasma norepinephrine(NE) and epinephrine(EP) concentrations during waking and sleep, using high performance liquid chromatography, in all patients and control subjects. Results : In OSAS, OSAS-NBP and control, plasma NE and EP concentrations during sleep were lowed than during waking(p<0.01). But, in OSAS-HBP, these was no difference between during waking and sleep. Plasma NE concentrations during sleep of OSAS, OSAS-NBP and OSAS-HBP were higher than Control(p<0.05). In OSAS-HBP, daytime systolic blood pressure correlated with plasma NE concentration during sleep(r=0.7415, p<0.01), arid correlated inversely with mean arterial oxygen saturation(r=-0.6465, p<0.05) or arterial oxygen saturation nadir(r=-0.6) 14, p<0.05) during sleep. Conclusion : The sympathetic activity during sleep of obstructive sleep apnea syndrome patients was higher than control subjects. In obstructive sleep apnea syndrome patients with systemic hypertension, there was no diurnal variation of sympathetic activity, and there was correlation between daytime systolic blood pressure and sympathetic activity during sleep. These data suggests that chronic hyperactivity of sympathetic nervous system may contribute to the development of diurnal systemic hypertension in patients with obstructive sleep apnea syndrome.

  • PDF

Vitamin $B_{12}$ Contents in Some Korean Fermented Foods and Edible Seaweeds (한국의 장류, 김치 및 식용 해조류를 중심으로 하는 일부 상용 식품의 비타민 $B_{12}$ 함량 분석 연구)

  • Kwak, Chung-Shil;Hwang, Jin-Yong;Watanabe, Fumio;Park, Sang-Chul
    • Journal of Nutrition and Health
    • /
    • v.41 no.5
    • /
    • pp.439-447
    • /
    • 2008
  • There is a limitation to estimate vitamin $B_{12}$ intake due to lack of data on vitamin $B_{12}$ content in many Korean foods. In this study, vitamin $B_{12}$ content was determined in some soybean or vegetable-fermented foods, edible seaweeds and other frequently consumed foods in Korea by microbioassay using Lactobacillus delbruecki ATCC 7830. The traditional type of Doenjang and Chungkookjang contained 1.85 ${\mu}g/100$ g and 0.69 ${\mu}g/100$ g of vitamin $B_{12}$, respectively, while the factory-type of Doenjang and Chungkookjang contained 0.04-0.86 ${\mu}g/100$ g and 0.06-0.15 ${\mu}g/100$ g. Vitamin $B_{12}$ was not detected in steamed soybeans and Tofu which is a not-fermented soybean product, indicating that vitamin $B_{12}$ in Doenjang and Chungkookjang might be produced during the fermentation process. The Korean-style soy sauce contained 0.04 ${\mu}g$ vitamin $B_{12}$/100 mL, but vitamin $B_{12}$ was not detected in Japanese-style soy sauce and white miso. Commercial Kimchi, a representative Korean vegetable- fermented food, made of Korean cabbage, Yeolmu, or Mustard leaves contained 0.013-0.03 ${\mu}g$ vitamin $B_{12}$/100 g, while Kimchi without red pepper and fermented fish sauce (White Kimchi) did not. Vitamin $B_{12}$ content was very high in some edible seaweeds such as laver (66.76 ${\mu}g/100$ g dry weight) and sea lettuce (84.74 ${\mu}g/100$ g dry weight), and it was 17.12 ${\mu}g/100$ g of dried small anchovy, 1.07 ${\mu}g/100$ g of whole egg, and 0.02 ${\mu}g/100$ g of coffee mix. From these results, it is assumed that Koreans take substantial amount of vitamin $B_{12}$ from plant-origin foods. And, with these data, we will be able to calculate dietary vitamin $B_{12}$ content more correctly than before. In conclusion, soybean-fermented foods, Kimchi, laver and sea lettuce are recommendable as good sources of vitamin $B_{12}$ for vegetarians or Korean elderly on grain and vegetable based diet.

Efficacy and Accuracy of Patient Specific Customize Bolus Using a 3-Dimensional Printer for Electron Beam Therapy (전자선 빔 치료 시 삼차원프린터를 이용하여 제작한 환자맞춤형 볼루스의 유용성 및 선량 정확도 평가)

  • Choi, Woo Keun;Chun, Jun Chul;Ju, Sang Gyu;Min, Byung Jun;Park, Su Yeon;Nam, Hee Rim;Hong, Chae-Seon;Kim, MinKyu;Koo, Bum Yong;Lim, Do Hoon
    • Progress in Medical Physics
    • /
    • v.27 no.2
    • /
    • pp.64-71
    • /
    • 2016
  • We develop a manufacture procedure for the production of a patient specific customized bolus (PSCB) using a 3D printer (3DP). The dosimetric accuracy of the 3D-PSCB is evaluated for electron beam therapy. In order to cover the required planning target volume (PTV), we select the proper electron beam energy and the field size through initial dose calculation using a treatment planning system. The PSCB is delineated based on the initial dose distribution. The dose calculation is repeated after applying the PSCB. We iteratively fine-tune the PSCB shape until the plan quality is sufficient to meet the required clinical criteria. Then the contour data of the PSCB is transferred to an in-house conversion software through the DICOMRT protocol. This contour data is converted into the 3DP data format, STereoLithography data format and then printed using a 3DP. Two virtual patients, having concave and convex shapes, were generated with a virtual PTV and an organ at risk (OAR). Then, two corresponding electron treatment plans with and without a PSCB were generated to evaluate the dosimetric effect of the PSCB. The dosimetric characteristics and dose volume histograms for the PTV and OAR are compared in both plans. Film dosimetry is performed to verify the dosimetric accuracy of the 3D-PSCB. The calculated planar dose distribution is compared to that measured using film dosimetry taken from the beam central axis. We compare the percent depth dose curve and gamma analysis (the dose difference is 3%, and the distance to agreement is 3 mm) results. No significant difference in the PTV dose is observed in the plan with the PSCB compared to that without the PSCB. The maximum, minimum, and mean doses of the OAR in the plan with the PSCB were significantly reduced by 9.7%, 36.6%, and 28.3%, respectively, compared to those in the plan without the PSCB. By applying the PSCB, the OAR volumes receiving 90% and 80% of the prescribed dose were reduced from $14.40cm^3$ to $0.1cm^3$ and from $42.6cm^3$ to $3.7cm^3$, respectively, in comparison to that without using the PSCB. The gamma pass rates of the concave and convex plans were 95% and 98%, respectively. A new procedure of the fabrication of a PSCB is developed using a 3DP. We confirm the usefulness and dosimetric accuracy of the 3D-PSCB for the clinical use. Thus, rapidly advancing 3DP technology is able to ease and expand clinical implementation of the PSCB.

The Precision Test Based on States of Bone Mineral Density (골밀도 상태에 따른 검사자의 재현성 평가)

  • Yoo, Jae-Sook;Kim, Eun-Hye;Kim, Ho-Seong;Shin, Sang-Ki;Cho, Si-Man
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.13 no.1
    • /
    • pp.67-72
    • /
    • 2009
  • Purpose: ISCD (International Society for Clinical Densitometry) requests that users perform mandatory Precision test to raise their quality even though there is no recommendation about patient selection for the test. Thus, we investigated the effect on precision test by measuring reproducibility of 3 bone density groups (normal, osteopenia, osteoporosis). Materials and Methods: 4 users performed precision test with 420 patients (age: $57.8{\pm}9.02$) for BMD in Asan Medical Center (JAN-2008 ~ JUN-2008). In first group (A), 4 users selected 30 patient respectively regardless of bone density condition and measured 2 part (L-spine, femur) in twice. In second group (B), 4 users measured bone density of 10 patients respectively in the same manner of first group (A) users but dividing patient into 3 stages (normal, osteopenia, osteoporosis). In third group (C), 2 users measured 30 patients respectively in the same manner of first group (A) users considering bone density condition. We used GE Lunar Prodigy Advance (Encore. V11.4) and analyzed the result by comparing %CV to LSC using precision tool from ISCD. Check back was done using SPSS. Results: In group A, the %CV calculated by 4 users (a, b, c, d) were 1.16, 1.01, 1.19, 0.65 g/$cm^2$ in L-spine and 0.69, 0.58, 0.97, 0.47 g/$cm^2$ in femur. In group B, the %CV calculated by 4 users (a, b, c, d) were 1.01, 1.19, 0.83, 1.37 g/$cm^2$ in L-spine and 1.03, 0.54, 0.69, 0.58 g/$cm^2$ in femur. When comparing results (group A, B), we found no considerable differences. In group C, the user_1's %CV of normal, osteopenia and osteoporosis were 1.26, 0.94, 0.94 g/$cm^2$ in L-spine and 0.94, 0.79, 1.01 g/$cm^2$ in femur. And the user_2's %CV were 0.97, 0.83, 0.72 g/$cm^2$ L-spine and 0.65, 0.65, 1.05 g/$cm^2$ in femur. When analyzing the result, we figured out that the difference of reproducibility was almost not found but the differences of two users' several result values have effect on total reproducibility. Conclusions: Precision test is a important factor of bone density follow up. When Machine and user's reproducibility is getting better, it’s useful in clinics because of low range of deviation. Users have to check machine's reproducibility before the test and keep the same mind doing BMD test for patient. In precision test, the difference of measured value is usually found for ROI change caused by patient position. In case of osteoporosis patient, there is difficult to make initial ROI accurately more than normal and osteopenia patient due to lack of bone recognition even though ROI is made automatically by computer software. However, initial ROI is very important and users have to make coherent ROI because we use ROI Copy function in a follow up. In this study, we performed precision test considering bone density condition and found LSC value was stayed within 3%. There was no considerable difference. Thus, patient selection could be done regardless of bone density condition.

  • PDF