• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.7
• /
• pp.975-980
• /
• 2001

The thermal analysis of the hot roller in a dry film laminator is studied numerically by steady-state two-dimensional heat transfer. In the laminating process for PDP glass or PCB, the temperature distributions in a hot roller are presented considering the effects of the roller rotation speed and the inner and outer radii of the roller. The results show that the temperature distributions are strongly dependent on Peclet number. If Pe number becomes larger, the iso-thermal lines are more concentric about the rotating axis and the temperature difference on the hot roller surface decreases exponentially. It also shows that if the contact angle between the roller and the film becomes smaller the temperature difference becomes smaller. However, the changes of the rollers inner or outer radius have little effect on the temperature difference.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.947-953
• /
• 2019

The purpose of this study was to manufacture a wrist brace using a computerized tomography system, clinical design software (MediACE 3D Program), and 3D printer. After acquiring the Dicom file of the upper limb with a computed tomography, the wrist brace was designed using the MediACE 3D Program to create a "stereolithography" file. The designed wrist brace was printed using a 3D printer. To verify the effectiveness of wrist assistive device manufactured by 3D printing technology, the stress distribution of the pressure and orthosis applied to bone and skin is represented by finite element analysis. It is expected that the wrist brace can be manufactured by reinforcing the part where the damage caused by pressure and breakage of the brace frequently occurs with the result of finite element analysis when producing the wrist brace.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1993.10a
• /
• pp.12-13
• /
• 1993

컴퓨터를 이용한 모의 실험 방법은 과학 및 공학 분야뿐만 아니라 경제,사회 현상등에도 널리 적용될 수 있는 유용한 도구이다. 그 중에서도 연속체계 모의 실험은 미분 방정식으로 모델링되는 시스템을 대상으로 하는 경우가 맡으며, 이를 위하여 그동안 맡은 연속체계 모의 실험 언어들이 개발되었다. 그러나 그들은 대부분 사용하기가 복잡하여 사용자 편의성을 고려한 모의 실험 언어에 대한 필요성이 증대되었다. 본 연구에서는 사용자에개 최대한 편의성을 제공하는 연속체계 모의 실험 언어인 PCSL (Postech Continuous-system Simulation language)을 개발하였다. PCSL 프로그램은 프로그램 헤더, 상수 정의부, 함수 정의부, 매개 변수 정의부, 초기화 선언부, 모델 정의부, 종료 조건 선언부, 출력 선언부 등으로 나누어 진다. 그리고 출력으로는 계산 결과를 파일에 저장, 흑은 수치로 인쇄하거나 그래프로 그려서 보여준다. PCSL 처리 시스템은 모델 정의부에서 주어진 미분방정식을 해석해서 digital-analog simulation 기법으로 풀 수 있는 형태로 변환하는 번역기와 이렇게 변환된 형태의 미분방정식과 여러 가지 조건들을 고려해서 C 프로그램을 생성해주는 생성기, 생성된 C 프로그램을 실행시켜서 그 결과를 얻는 실행기,그리고 사용자에게 편리한 입출력 방법을 제공하는 사용자 인터페이스로 구성된다. 번역기에서는 모델로 주어진 미분방정식의 종류를 결정한 후에 이들을 digital-analog simulation 기법으로 풀 수 있는 형태로 변환한다. 생성기에서는 번역기의 결과를 받고,프로그램 상의 여러 가지 조건들을 고려해서 C 프로그램을 생성한다. 여기서 생성된 C프로그램은 미분방정식을 포함하는 ‘f.c'와 조건들을 포함하는'main.h', 그리고 digital-analog simulation 기법을 이용하는 모의 실험 알고리즘을 구현한 'main.c'로 구성된다. 그리고 실행기에서는 생성기에서 생성한 C 프로그램을 실행시켜서 결과를 얻는다. 여기에서 필요로 하는 PCSL 프로그램의 내응은 종료 조건 선언부, 출력 선언부 등이다. 마지막으로 사용자 인터페이스는 사용자가 간편하게 PCSL 프로그램을 입력할 수 있게 도와주며 모의 실험 결과를 쉽게 화면상에 보여주기 위한 것이다. 이 때에 사용자가 원하면 계산 결과를 그래프로 그려서 보여주는 기능과 화면에 보이는 결과를 프린터로 출력할 수 있는 기능을 제공한다. 실형 결과로는 먼저 선형 상미분방정식의 예로 mass-damper-spring system, 비선형 상미분방정식의 예로는 van der Pol 방정식, 연립 상미분방정식의 예로는 mixing tank problem 등을 보였으며, 그의 공학에서 일어나는 여러 가지 문제들도 다루었다.

• The Korean Journal of Quaternary Research
• /
• v.14 no.1
• /
• pp.73-86
• /
• 2000

Abstracts and papers written in Korean presented in the 26th meeting of the Korea Quaternary Association held at Kongju University in November, 1999 are reviewed with an attention to such as writing well in Korean. Paragraphs and sentences of manuscripts are dotted with words and expressions of foreign languages such as Japanese, Chinese, English, and very long sentences. Undesirable expressions include also contradictory meanings, difficult expressions using Chinese characters, and incorrect sentences and wordings, and etc. Some recommendations for good manuscripts written in Korean are suggested. They include reading of science books for general readers and drilling for writing good manuscripts in Korean. Writing manuscripts in ample time, discussions with colleagues, and open-minded mentality of authors to accept critics are included in the drilling for writing good manuscripts. Editorial board should also check the manuscripts before printing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.691-700
• /
• 2017

This paper describes the design and implementation of automatic braille converter based on image processing for a person who is visually impaired. The conversion algorithm based on the image processing converts the input image obtained by the web-cam to binary image, and then calculates the cross-correlation with the stored character pattern image by labeling the character area and converts the character pattern image into the corresponding braille. The computer simulations showed that the proposed algorithm showed 95% and 91% conversion success rates for numerals and alphabets printed on A5 paper. The prototype test implemented by the servo motor using Arduino confirmed 89%, conversion performance. Therefore, we confirmed the feasibility of the automatic braille transducer.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.114-121
• /
• 2004

Thermal design changes and analysis on the engineering model of Command Telemetry Unit(CTU) for a geostationary communications satellite arc performed for the purpose of developing an engineering qualification model. A thermal model is developed by using power consumption measurement values of each functional board and thermal cycling test results. In modeling heat dissipated EEE parts, heat dissipation is imposed evenly on the EEE part footprint area which is projected to the printed circuit board. All the EEE parts of CTU meet the requirement of their allowable temperature range when placed on the engineering qualification level of thermal vacuum environments in accordance with the proposed thermal design changes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1349-1359
• /
• 1998

In this paper, presented is the result of a digital implementation of a FM stereo composite signal generator. The chip utilizing DDFS(Direct Digital Frequency Synthesizer architecture is implemented using $1.0\mu\textrm{m}$ CMOS gate-array technology thereby replacing analog componentry. To verify the process of generating composite signals a conventional logic simulation method was used. The processed chip was mounted on an evaluation PCB to test and analyze to signals. According to the measurement result obtained by using a 12-bit DAC, the digital FM composite signal generator produces a 74DB spectrally pure signal over its entire tuning range, which is superior to that of analog counterpart by 14dB in it spectral reponse. And further enhancements of the spectral response is expected to be achieved by using a high resolution digital to analog converter, such as a 16-bit DAC. The resulting signals is superior to the signal of the analoy circuitry typically used, in major characteristics such as S/N ratios, accuracy, tuning stability, and signal seperation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6289-6295
• /
• 2014

Rework systems are the equipment used to install or remove semiconductor chips with BGA or SMD forms in printed circuit boards. The rework systems have hot air outlets. At the outlets, precise temperature control is needed to avoid heat shock. The aim of this paper was to suggest a new controller for temperature control at the hot air outlets. The suggested controller was a fuzzy PID controller. The fuzzy PID controllers were composed of TSK fuzzy rules and had outstanding ability for nonlinear systems control. This paper reports the design algorithm of fuzzy PID controllers, and the design process of the fuzzy PID controller for the temperature control of the outlets. Temperature control experiments were performed to verify the ability of the suggested controller. As a result, the RMS of the proposed method is 9.44 and the general method is 15.88. The experiments showed that the temperatures at the outlet using the suggested fuzzy PID controller followed the desired ones better than the commonly used PID controller.

• Korean journal of communication and information
• /
• v.41
• /
• pp.7-40
• /
• 2008

The aim of this study is to examine the role of publishing in emerging process of nationalism in modern Korea. In the process of coping with the imperialist invasion, the Korean nationalism had begun to emerge. With the Patriotic Enlightenment movement from 1905 till 1910, the publishing in Korea had become activated remarkably. With the books of enlightenment the Korean society could try to overcome the traditional China-centered world view and try to build up a new recognition of 'others'. In addition the books of enlightenment provided information on the various aspects of modern nationalism. And the republishing the Korean classical books seemed to have been very conducive to improve national self-esteem of Korea. The books on history contributed to building up new national identity which was an indispensable to the nationalism. The Korean history was reinvented from the nationalistic viewpoint. The biographies of historic heros presented some historic model of overcoming the national crisis. In conclusion the publishing in modern Korea played an important role in emerging process of the Korean nationalism.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.1
• /
• pp.55-64
• /
• 2013

Due to the popularization of digital high-performance capturing equipments and the emergence of powerful image-editing softwares, it is easy for anyone to make a high-quality counterfeit money. However, the probability of detecting a counterfeit money to the general public is extremely low. In this paper, we propose a counterfeit money detection algorithm using a general purpose scanner. This algorithm determines counterfeit money based on the different features in the printing process. After the non-local mean value is used to analyze the noises from each money, we extract statistical features from these noises by calculating a gray level co-occurrence matrix. Then, these features are applied to train and test the support vector machine classifier for identifying either original or counterfeit money. In the experiment, we use total 324 images of original money and counterfeit money. Also, we compare with noise features from previous researches using wiener filter and discrete wavelet transform. The accuracy of the algorithm for identifying counterfeit money was over 94%. Also, the accuracy for identifying the printing source was over 93%. The presented algorithm performs better than previous researches.