• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.151-164
• /
• 1997

We tried to improve the coating capability of the coating material using an additive(hexagonal crystalline graphite) of 2%, 3%, 4% and 6% under various pouring temperature for the easy isolation of sand and coating material from the final product. As a result in case of using a 2% and 3% additive to the Korean coating material generally no burning state has been occurred under the low pouring temperature, but it has been gradually increased with the pouring temperature, while in case of using a 2% and 3% additive to the Japanese coating material we could observe a strong burning state throughout the whole pouring temperature. On the other hand in case of using a 4% and 6% additive there has been no burning state through out the whole pouring temperature. From this result we could see that the best state of the final product without sand and coating material could generally be obtained if 4% and/or 6% of the crystalline graphite and the pouring temperature of $1400^{\circ}C$$\pm$$5^{\circ}C$ would be used.

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.308-310
• /
• 2001

유기물질이 오랜 기간동안 고온 고압하에서 탄화작용을 받아 생성된 천연흑연은 단위구조가 탄소육각망평면(炭素六角網平面)이 평행하게 배열된 층상으로 전기전도도 및 윤할성이 우수하나 소수성이 매우 강하며 표변화학적 특성이 거의 없기 때문에 다른 물질과 표면흡착이 매우 어려운 물질이다. 따라서 본 연구에서는 흑연의 표면특성을 변화시키고자 유기물(ABDM)을 흡착시키고 표면흡착 매커니즘 및 표면특성을 해석하였다. 흑연 입자 표면 위의 ABDM흡착은 두 단계의 서로 다른 게에서 이루어졌다. 첫 번째 단계는 흡착 초기 흑연입자와 ABDM의 표면전위 특성차이에 의한 1차 흡착으로 흑연표면 소수성이 더욱 증가하는 상태이고, 두 번째 단계는 1차 흡착된 ABDM 과 용액중의 ABDM chain 상호간의 steric 작용에 의한 2차 흡착이었다. 2차 흡착이 완료된 흑연입자 표면은 ABDM 이중층을 형성하게 되고 이에 따라 흑연의 표면전위 특성을 변화시킬 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.54-54
• /
• 2001

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.124-130
• /
• 2005

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.37-44
• /
• 2006

The total amount of graphite reserves in Korea is about 260 thousand tons. Graphite larks international competitiveness it is mined in only few mines, but recently the demand of portable electronic has increased. Therefore a research for manufacturing domestic high purity graphite is necessary because all of high purity graphite used electrode of 2nd batter depends on expensive importation. A preprocessing level for producing high purity graphite, flotation was conducted using microbubble column machine. In this research $D_{50}=10.314{\mu}m$ sample was used which was produced after grinding 29.50% F.C. primary crushing sample($D_{50}=69.393{\mu}m$) for 20 minutes through attrition mill. As a result using this sample, product above 95% F.C. with recovery over 90% was obtained with only after first stage process through the microbubble column.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.679-684
• /
• 2001

The surface of natural graphite has not only good electrical conductivities and lubrication properties but also has strong hydrophobicity. There are no functional groups and chemical properties on it. It is difficult to join with any other ions and to disperse in aqueous system. In order to increase dispersion ability throughout modification of surface property, it is necessary to let graphite have some function on its surface by the adsorption of surfactant molecules. In this study, using zeta potential adsorbed surfactant molecules(ABDM) on graphite surface and its surface Properties turn hydrophobic into hydrophilic. The dispersing mechanism of graphite particles in aqueous system has been explained using the DLVO theory, It is concluded that the high dispersable graphite suspension of which dispersing stability$(T_{1/2})$ is 44.5 hours at pH 10 and 22.5mV zeta potential can be produced.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.05a
• /
• pp.372-374
• /
• 2004

최근들어 비금속광물의 구조적 특성을 이용한 활용분야가 매우 다양해지고 있다. 특히 판상광물은 차폐(은폐)력이 매우 우수하고, 층간특성을 이용한 흡착 및 저장특성이 매우 우수하다. 본 연구에서는 이와 같은 판상광물의 기본의 특성에 또 다른 기능성 물질을 흡착시킴으로써 부가적인 새로운 기능성을 갖는 친환경성 건축소재를 개발하고자 천연산 인상흑연 및 견운모를 기능성 모소재로 사용하고 미립화 및 표면 환경기능화를 위하여 BMK로 흑연입자 표면을 기능화하였다. 제조된 기능성 마감재인 닥터하우스를 모르타르에 도포하여 다양한 기능성을 측정한 결과 78% 이상의 유해가스(포름알데히드) 정화제거효과 및 99.9% 이상의 항균, 항곰팡이 효과를 갖는 것으로 나타났다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.5
• /
• pp.430-437
• /
• 2004

This paper is intended as an investigation of study on the thermal and electrical characteristics of the carbon heating element. In this experimentation, the electric material used is the crystalline graphite a kind of natural graphite. The bentonite is used to solidify the heating element and the vacuum furnace is used for sintering it. It is noted that the natural drying time should be at least 58 hours. The plating of the electric pole with the electroless nickel showed the lowest contact resistance among others. The resistance shows linear variation with regard to length. For the insulation and resolution, the glaze coating is best with 80% of water content. The temperature rising characteristic of the heating element is better than sheath heater saving 43% of rising time. The correlation equation for temperature was obtained with the electric power.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.811-817
• /
• 2003

Recently, application fields of non-metallic minerals by utilizing their structure properties are broadening. Especially, layered minerals have not only excellent shielding or covering ability but also absorbing and storing characteristics of chemical elements between a layers. We considered about the above mentioned characteristics and added functional substances onto their surfaces for the preparation of new environmentally friendly functional materials. In this study, natural graphite and sericite were mainly used to produce for the new environmentally friendly functional building materials. Graphite surfaces were modified with a surfactant (Alkyl Benzyle Demethyle Ammonium Chloride) for anti-bacillus and penicillium. Surface modification mechanism are that primary adsorption by differential zeta potential between graphite and ABDM and secondary adsorption by interaction between surfactant chains take place. Surfactant layers were fully formed and it was expected up to 99.7% up the efficiency of anti-bacillus and penicillium. Also the prepared functional samples have a effect to improve a various efficiency such as electromagnetic wave shield(up to 95%), deodorization(up to 80%), heat storage(5%) etc.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.66-72
• /
• 2022

The circularity and particle size distribution of products obtained from dry classification after circularity tests using a high-intensity mixer were investigated to evaluate the use of domestic graphite concentrate as a lithium-ion battery material. At a rotor speed of 3,000 rpm, the particle size and circularity of the concentrated sample and product were unchanged. The circularity increased and particle size decreased when the rotor speeds were increased to 6,000 rpm, 10,000 rpm, and 12,000 rpm and the operating time was increased. For instance, the circularity increased from 0.870 to 0.936 when the rotor speed was increased from 3,000 rpm to 12,000 rpm for an operating time of 10 min. After the circularity test, dry classification was performed, wherein the circularity of the coarse particles was found to have increased to 0.947. Round particles were observed in the SEM images, indicating that high circularity was successfully achieved.