• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.125-134
• /
• 2007

This study has been carried out in order to examine the precipitation characteristics of Fe, Mn and Al ions in coal mine drainage before removing heavy metals by using the froth flotation method. The removal rate of Fe(III), Mn(II) and Al(III) within 1 h accounted for over 99% in pH 5.0, 10.0, and $6.0{\sim}9.0$ respectively, and residual concentrations of which were under $1mgL^{-1}$. When sodium oleate as a collector was added to the solution of Fe, Mn, and Al ions, insoluble salts was not formed by the reaction of heavy metal and sodium oleate. So, we must remove the metals from coal mine drainage by using not the ion flotation method, but the precipitation flotation method

• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.130-134
• /
• 2007

This study was carry out to investigate the effect of supplemental lighting on the growth and flowering of Rosa hybrida 'Nobles' in winter. Supplemental lighting was treated during 5 hours at night with sodium lamp and fluorescent lamp, and cut flowers harvested 2 times for the experimental period. After supplemental lighting, air temperature and slab temperature in glasshouse was higher in sodium lamp treatment than control. Realtive humidity was low in sodium lamp treatment. Total nitrogen phosphate, potassium, calcium, and magnesium contents of stem in sodium lamp treatment were higher compare to the other treatment. In sodium lamp treatment, the potassium and magnesium content of leaf in control were lower than the others. Chlorophyll content was not different by source of lighting. Stem length and diameter was longer in sodium lamp treatment. In two times, the yield was highest in sodium lamp treatment. Therefore, supplemental lighting with sodium lamp in winter season was recommended for improving the yield and quality in cut rose 'Nobles'.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.137-141
• /
• 2010

Sodium nitrite is widely used as one of the popular corrosion inhibitors for the protection of ferrous metal in closed cooling water system, such as a diesel engine and a chiller. The optimum treatment conditions are studied through laboratory tests using linear polarization resistance (LPR) technique. Corrosion rate of the carbon steel electrode could be maintained less than $2.5{\times}10^{-3}$ mmpy in the test condition of 500 ppm as ${NO_2}^-$, 200 ppm as $Cl^-$, $70^{\circ}C$ and pH 6.8. The pH control is confirmed not to be an important factor in the protection of carbon steel by sodium nitrite inhibitor. The addition of tolyltriazole was needed for the protection of the copper alloy in the sodium nitrite treatment system.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.188-191
• /
• 1991

A study was carried out to investigate the control effect of sodium and potassium phosphates, sodium citrate and three different salts mixtures on kimchi fermentation when they were added into half-fermented kimchi in the concentration range of $0.001{\sim}0.01\;M$. The salts mixtures added were sodium phosphates mixture(CA-A), addition of $NaNO_2$, Ca-EDTA and BHA to CA-A(CA-B) and substitution of BHA with sodium citrate in CA-B. The results showed that sodium phosphates and sodium citrate significantly inhibited the kimchi fermentation while potassium phosphate had little effect. The order of control effect was $Na_3PO_4-Na_2HPO_4-sodium\;citrate-NaH_2PO_4-K_2HPO_4-KH_2PO_4$. Among the salts mixtures, CA-A showed the most reducing effect in the fermentation rate followed by CA-C and CA-A. The mixture of CA-C could extend the time of holding pH $4.2{\sim}4.4$ by approximately 6 times at $4{\sim}25^{\circ}C$ when it was compared to control. The microbial growth study of total and Leuconostoc mesenteroides also showed a very significant decrease in their numbers.

• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.695-701
• /
• 1991

Spent layer breast meat and leg meat samples washed with 0.05 M sodium bicarbonate solution and 0.04 M phosphate buffer(pH 8.3) showed decreases in heat denaturation temperature indicating the destabilization of myofibrillar proteins. The destabilization was attributed to the solubilization of 95 Kdalton and 55 kdalton proteins from the myofibrils observed in gel-electrophoretograms. Transmission electron microscopy further indicated the breakage of Z-lines.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.55-61
• /
• 2014

Froth flotation was performed to study the effect of phosphate addition in the experiment to remove As from tailing of Sang-dong Mine. The experiment without Trisodium phosphate (T.S.P) showed that the removal rate of As was 88.7% and weight-ratio of floating material was 2.52%. By contrast, the experiment with T.S.P showed that the removal rate of As was 92.74% and weight-ratio of floating material was 2.26%. In flotation without T.S.P, the average particle size of float material was 19.34 um and the amount less than 10um was 40.2%. On the other hand, in flotation with T.S.P the average particle size of float material was 176.8 um and the amount less than 10um was 6.5%. The result of X.R.F analysis presented that contents of $SiO_2$ was 42.74% in float material of the experiment without T.S.P. In contrast, contents of $SiO_2$ was 29.56% in float material of the experiment with T.S.P.

• Food Science and Preservation
• /
• v.19 no.2
• /
• pp.216-222
• /
• 2012

The optimum annealing conditions of corn starch slurry were studied for RS4 type resistant starch production by phosphorylated cross-linking. When a corn starch slurry was cross-linked by using phosphate salts (STMP/STPP mixture) in the presence of 0.9%, 1.2% and 1.5% NaOH/st.ds, a high concentration of NaOH resulted in a rapid increase of the RS contents at the early reaction stage. However, similar RS contents were obtained after 12 h of cross-linking regardless of NaOH concentrations. The annealing treatment was conducted under various conditions such as pH between 2-10, temperature $40-60^{\circ}C$, time 0-14 h followed by phosphorylated cross-linking. The lower slurry pH was for the annealing treatment, the higher RS contents were obtained after cross-linking. When the slurry annealed for various period of time and temperature, a maximal amount of RS was formed after 2 h of annealing at $50^{\circ}C$ of annealing temperature of the starch slurry (pH 2.0). Therefore, an optimal annealing conditions at pH 2.0 and $50^{\circ}C$ for 2 h were proposed under the cross-linking conditions of sodium sulfate 10%/st.ds, NaOH 1.2%/st.ds and 12 h of the reaction time. The RS contents were linearly increased with the increase of phosphate salt addition. The RS4 prepared under the optimal conditions contained RS 72.3% and its phosphorus content was 0.36%/st.ds, which was below the limit (0.4%/st.ds) of modified starch by Korea Food Additives Code.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.366-373
• /
• 2015

Construction waste is recycled and used for the efficient and eco-friendly disposal of construction waste increasing due to reconstruction and redevelopment project and so on. There is recycled aggregate as a typical case. And this recycled aggregate shows strong alkalinity due to calcium hydroxide, and causes many environmental problems. Therefore, this is a study on reduction in the strong alkalinity of recycled aggregate by using sodium phosphate based ammonium in order to reduce the pH of recycled aggregate. Besides, a possibility that a pH reducing agent of recycled aggregate could be applied to a site was evaluated. As a result, it was possible to verify that pH decreased as the percentage of pH reducing agent increased. It is thought that the pH reducing agent can be applied to a site by methods such as immersion and spray using the pH reducing agent in the process of producing recycled aggregates.

• Korean Journal of Food Science and Technology
• /
• v.9 no.1
• /
• pp.47-60
• /
• 1977

A $7{\sim}10%$ aqueous phosphate solution comprised of 85% sodium tripolyphosphate and 15% sodium hexametaphosphate was injected into tuna flesh prior to precook until the fish weight increased approximately $4{\sim}10%$. The experiments were conducted at a commercial tuna processing plant using Yellowfin tuna (Thunnus albacares) of $45{\sim}68kg$ and $7.3{\sim}10.5kg$ sizes, and Skipjack tuna (Euthynnus pelamis) of $4.5{\sim}5.0kg$ size. The experimental results showed that the phosphate treatment resulted in: 1. Approximately $5{\sim}8%$ increase in yield and somewhat more moist meat with the large Yellowfin. 2. Approximately $3{\sim}8%$ increase in yield with the smaller Yellowfin. 3. Approximately $1{\sim}4%$ increase in yield with the Skipjack. 4. Minimal improvement in color and flavor.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.5
• /
• pp.27-32
• /
• 2009

This study evaluates tripolyphosphate's ability to treat AMD (Acid Mine Drainage). Based on the batch test results for reaction between tripolyphosphate and AMD obtained from Munkyung coal mine, $4.7{\times}10^{-3}$ mole is the optimum dosage of tripolyphosphate for AMD treatment. $Ca^{2+}$ concentration is decreased from $16.4mg/{\ell}$ to $5.6mg/{\ell}$, in other words, the removal rate of $Ca^{2+}$ is 65.9%. $Fe^{3+}$ concentration is decreased from $3.7mg/{\ell}$ to $0.02mg/{\ell}$, that is, the removal rate of $Fe^{3+}$ is 99.5%. $SO{_4}^{2-}$ concentration ranges from $526.8mg/{\ell}$ to $566.5mg/{\ell}$, which shows no obvious decrease. After dosing up tripolyphosphate, $Na^+$ concentration in AMD ranges from $549.8mg/{\ell}$ to $599.3mg/{\ell}$ and orthophosphate concentration in AMD ranges from $6.82mg/{\ell}$ to $7.60mg/{\ell}$. It was found that the precipitate in the order of amount is Apatite${\gg}{\beta}$-tricalcium phosphate > $Fe(OH)_3$ from SEM, XRF, XRD analyses. Consequently, the treatment by tripolyphosphate is effective in pH buffering and in the removal of $Ca^{2+}$ and $Fe^{3+}$.