• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1157-1158
• /
• 2012

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.32-32
• /
• 2008

생체용 티타늄 합금은 높은 내식성 및 생체적합성을 갖는 특성으로 치과용 임플란트 및 인공 고관절 분야에서 널리 쓰이고 있다. 본 연구에서는 Ti에 Hf 원소를 10, 20, 30 및 40 % 첨가하여 합금 한 후, 양극산화 처리를 통해 다공성 산화피막을 형성하였다. 각각 다른 온도에서 열처리 한 후, 인가전압, Hf 원소 함량 및 열처리 온도에 따른 부식특성을 조사하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.511-512
• /
• 2006

According to development of medical science and engineering, people has made efforts to solve tile discomfort of body accident as well as the life span. Many cases that reduce pain of a hip joint or limitation of motion using Revision Total Hip Replacement are getting increased. However it has not proved which material is the most appropriate. Scientists are still studying about materials of the artificial joint. In accordance with advance of science, the materials are Betting better. Recently, when Revision Total Hip Replacement is performed, typical materials are Ti-alloys Ceramics. We have studied materials of artificial joints and analyzed which one is better for human's body.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.115-122
• /
• 2018

The success of the total hip arthroplasty is revealed as initial stability, range of motion, and long term pain, etc. Depending upon choice of implantation options such as femoral neck offset, diameter of the femoral head, the lateral opening tilt. Especially the impingement between femoral head component and acetabular cup limits the range of motion of the hip. In this sense, estimation or evaluation of the range of motion before and after the total hip arthroplasty is important. This study provides the details of a computer simulation technique for the hip range of motion of intact hip as well as arthroplasty. The suggested method defines the hip rotation center and rotation axes for flexion and abduction, respectively. The simulation uses CT-based reconstructed 3D models and an STL treating software. The abduction angle of the hip is defined as the superolateral rotation angle from sagittal plane. The flexion angle of the hip is defined as the superoanterior angle from the coronal plane. The maximum abduction angle is found as the maximum rotation angle by which the femoral head can rotate superolaterally about the anterior-posterior axis without impingement. The maximum flexion angle is found as the maximum rotation angle by which the femoral head can rotate superoanteriorly about the medial-lateral axis without impingement. Compared to the normal hip, the total hip replacement hip showed decreased abduction by 60 degrees and decreased flexion by 4 degrees. This measured value implies that the proposed measurement technique can make surgeons find a modification of increase in the femoral neck offset or femoral head, to secure larger range of motion.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.7
• /
• pp.31-37
• /
• 2009

• Clinics in Shoulder and Elbow
• /
• v.16 no.2
• /
• pp.170-177
• /
• 2013

Total elbow arthroplasty is still in its infancy compared with other arthroplasties, such as knee or hip arthroplasties. Implant design has been evolving with clinical experiences; however, there are only limited data on the long-term clinical outcome of elbow arthroplasty in the literature. The design of total elbow prostheses can be divided into three categories: linked (constrained or semi-constrained), unlinked (unconstrained), and convertible types. The choice between an unlinked (unconstrained) implant and a linked (semi-constrained) implant depends on joint stability and adequacy of the bone stock. Linked elbow arthroplasty has provided high patient satisfaction, and pain relief thanks to proper patient selection, advancement of implant design, improvement in cement techniques, meticulous surgical technique, and appropriate postoperative rehabilitation. Concerns remain about the use of this implant in young or high-demand patients. This article focuses on the linked (semi-constrained) prostheses, which provides an overview of the current state of linked total elbow arthroplasty.

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.1
• /
• pp.115-123
• /
• 2003

Study Design: A retrospective clinical and radiographic review. Objectives: The purpose of this study was to suggest recycling bone autotransplantation with extracorporeal heat-treatment as one of favorable reconstruction method for malignant bone tumors of pelvis through 3 cases. Summary of Literature Review: There are many biologic and nonbiologic reconstruction method in pelvic reconstruction. Cases: Case 1- A 20-year-old women had chief complaint of right hip and thigh pain started 3 months ago and done curettage and bone cementing at right ilium at other hospital. She had impression of malignant bone tumor and undergone postoperative radiation therapy for 6 cycles. After that she was referred to our hospital and undergone wide excision of right ilium and recycling bone autotransplantation with extracorporeal heat-treatment at 132 degree celsius for 2 minutes internal fixation with pelvic reconstruction plate and total hip replacement arthroplasty (ABG$^{(R)}$). There was no evidence of distant metastasis and revealed well-differentiated osteosarcoma on postoperative pathology. Neither adjuvant nor neoadjuvant chemotherapy were done. Case 2- A 56-year-old women who suffered right thigh pain for 3 months was detected radiologic abnormality at right pelvis. After incisional biopsy, osteosarcoma was diagnosed. We had undergone wide excision of right ilium and recycling bone autotransplantation with extracorporeal low heat-treatment at 65 degree celsius for 30minutes internal fixation with pelvic reconstruction plate and total hip replacement arthroplasty (ABG$^{(R)}$). There was no evidence of distant metastasis and revealed high-grade osteosacoma which was fibroblastic type on postoperative pathology. Adjuvant chemotherapy (HDMTX, ADR, CDDP) was done immediate after wound healing was completed. Case 3- A 46-year-old women was incidently found mass at left ilium which was suspected chondrosarcoma. We had undergone wide excision of left ilium and recycling bone autotransplantation with extracorporeal low heat-treatment at 65 degree celsius for 30minutes internal fixation with pelvic reconstruction plate and total hip replacement arthroplasty (Protek$^{(R)}$). There was no evidence of distant metastasis and revealed chondrosarcoma which was graded II/III on postoperative pathology. Results: Oncologic and functional outcome at final follow-up were for case 1, final follow-up time was 7 years, is no evidence of disease and functional score is 53% according to Ennecking et al. During follow-up, evidence of radiologic union was at about 1 and 6 months after operation. The case had breakage of pelvic reconstruction plate and some resorption of autotransplated bone, but no symptom present. For case 2, final follow-up was 3 years and 6 months, is no evidence of disease and functional score is 60%. For case 3, final follow-up was 7 months, no evidence of disease and functional score is 63% which is improving state. Discussion: 3 cases which were undergone recycling bone autotransplantation with extracorporeal heat-treatment and total hip replacement arthroplasty had relatively successful oncologic and functional outcome. Taking account that difficulty in using allograft in Korea this method is thoght to be one of the useful way to reconstruct pelvis after resection of primary malignant bone tumor of the pelvis.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.401-410
• /
• 2003

This study investigates the biomechanical efficacies of various cement augmentation techniques with or without pressurization for varying degrees of osteoporotic femur. For this study, a biomechanical analysis using a finite element method (FEM) was undertaken to evaluate surgical procedures, Simulated models include the non-cemented(i.e., hip screw only, Type I), the cement-augmented(Type II), and the cemented augmented with pressurization(Type III) models. To simulate the fracture plane and other interfacial regions, 3-D contact elements were used with appropriate friction coefficients. Material properties of the cancellous bone were varied to accommodate varying degrees of osteoporosis(Singh indices, II∼V). For each model. the following items were analyzed to investigate the effect surgical procedures in relation to osteoporosis of varying degrees : (a) von Mises stress distribution within the femoral head in terms of volumetric percentages. (b) Peak von Mises stress(PVMS) within the femoral head and the surgical constructs. (c) Maximum von Mises strain(MVMS) within the femoral head, (d) micromotions at the fracture plane and at the interfacial region between surgical construct and surrounding bone. Type III showed the lowest PVMS and MVMS at the cancellous bone near the bone-construct interface regardless of bone densities. an indication of its least likelihood of construct loosening due to failure of the host bone. Particularly, its efficacy was more prominent when the bone density level was low. Micromotions at the interfacial surgical construct was lowest in Type III. followed by Type I and Type II. They were about 15-20% of other types. which suggested that pressurization was most effective in limiting the interfacial motion. Our results demonstrated the cement augmentation with hip screw could be more effective when used with pressurization technique for the treatment of intertrochanteric fractures. For patients with low bone density. its effectiveness can be more pronounced in limiting construct loosening and promoting bone union.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.470-473
• /
• 2021

In this study, we developed the biometric ultrasound transducer, residual thickness measurement algorithm and optimized ultrasound operation methods to diagnose precise conditions of implanted medical prosthetic material inserted during total hip artificial joint replacement. In detail, ultrasound transducers having 8 MHz and 20 MHz center frequencies with similar sensitivity and bandwidth were fabricated to measure various thicknesses of commercial polyethylene-based artificial hip liners, resulting in a comparative analysis of signal-to-noise ratio and axial resolution to conduct an optimization study of ultrasound operations in vivo.

• Journal of muscle and joint health
• /
• v.25 no.2
• /
• pp.122-134
• /
• 2018

Purpose: The purpose of this study was to develop a 12-week structured exercise program (12-week-SEP) and evaluate its effects on pain, physical function and quality of life in patients with total hip arthroplasty (THA). Methods: A nonequivalent control group non-synchronized design was utilized to examine the effects of the 12-week-SEP on patients' outcomes after THA. A total of 46 adult patients (experimental group=25, control group=21) who had THA were recruited for the study. The 12-week-SEP consisted of education, exercise (muscle strengthening and progressive walking), and feedback. Data were analyzed by SPSS/WIN 21.0 using the $x^2$ test and repeated measures ANOVA. Results: The mean age of the participants was 60.9 years and 25 men (54.5%) and 21 women (45.7%) were included in the study. There were significant intervention effects on pain reduction and increased physical function but no effects on quality of life. Conclusion: The 12-week-SEP provided pain relief and enhanced physical function in patients underwent THA. Clinical application of the 12-week-SEP can improve postoperative nursing practices for patients with THA. Future research with larger sample is of necessity to obtain greater generalizability of the empirical evidences of the 12-week-SEP.