• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.187-194
• /
• 2012

This paper compares two collision avoidance algorithms using a simulator. The collision avoidance is vital for autonomous navigation of a mobile robot. Artificial potential field method and elastic force method are major approaches for the collision avoidance. The two algorithms are compared in the respect of the time for motion completion and the length of the motion path. The simulator is developed based on IPC(Inter Process Communication) and a differential drive mobile robot is used for the comparison.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.401-407
• /
• 2012

This paper analyzes performance of major obstacle avoidance methods. For the analysis, numerical performance indexes are proposed: motion distance to goal point, motion time, distance to obstacles, and smoothness of the motion. Especially, the index of smoothness measures efficiency of the motion using the angular acceleration and jerk of the robot heading. Four major obstacle avoidance methods are compared in terms of the performance indexes. The four methods are artificial potential field(APF) method, elastic force(EF) method, APF with virtual distance, and EF with virtual distance. Through simulation, the four methods are compared and features of the methods are explored.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1713-1718
• /
• 2013

In this paper we implement collision avoidance using an artificial potential field and remote control of a mobile robot through ROS(Robot Operating System) among the robot's middleware. We also apply dynamic reconfigure to a node of collision avoidance. The main purposes of ROS are sharing and cooperation. In order to make to fit the purpose of ROS, the hardware that frequently is used in the robot such as LRF and joystick, were reused as node that provide in the ROS.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.67-75
• /
• 1998

This paper presents a new robot motion planning method for moving obstacle avoidance. To consider the mobility of a moving obstacle, we define virtual distance function(VDF) between the robot and the obstacle. At each sampling time, we use the VDF to construct an artificial potential, considering the motion of obstacles. The robot moves according to the repulsive and attractive force vector induced by the artificial potential function. The proposed algorithm can be driven the robot to avoid moving obstacles in real time. Some simulation studies show the effectiveness of the proposed method.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.59-69
• /
• 2013

This study presents development of the ANN simulator for well placement of infill drilling in gas fields. The input data of the ANN simulator includes the production time, well location, all inter well distances, boundary inter well distance, infill well position, productivity potential, functional links, reservoir pressure. The output data includes the bottomhole pressure in addition to the production rate. Thus, it is possible to calculate the productivity and bottomhole pressure during production period simultaneously, and it is expected that this model could replace conventional simulators. Training for the 20 well placement scenarios was conducted. As a result, it was found that accuracy of ANN simulator was high as the coefficient of correlation for production rate was 0.99 and the bottomhole pressure 0.98 respectively. From the resultes, the validity of the ANN simulator has been verified. The term, which could produce Maximum Daily Quantity (MDQ) at the gas field and the productivity according to the well location was analyzed. As a result, the MDQ could be maintained for a short time in scenario C-1, which has the three infill wells nearby aquifer boundary, and a long time in scenario A-1. In conclusion, it was found that scenario A maintained the MDQ up to 21% more than those of scenarios B and C which include parameters that might affect the productivity. Thus, the production rate can be maximized by selecting the location of production wells in comprehensive consideration of parameters that may affect the productivity. Also, because the developed ANN simulator could calculate both production rate and bottomhole pressure, respectively, it could be used as the forward simulator in a various inverse model.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.77-82
• /
• 2000

Seven constructed and three natural tidal flats were compared to evaluate state-of- the-art of creation and restoration technology for tidal flats. parameters studied were physico-chemical and biological characteristics of soils and rate of respiration. The natural tidal flats had higher contents of silts, nitrogen and organic matter compared to the constructed ones. The natural ones had reductive Bone below 2 cm whereas the constructed ones had oxidative zone from the surface to below 20 cm. The bacterial population in the soil of the constructed tidal flats was one to two magnitudes lower than that in the natural ones. Biomass of macrobenthos and microbial respiration rate, however, were not different significantly between the natural and the constructed tidal flats. The purification capacity by diatom+bacterial+meiobenthos and macrobenthos in the constructed tidal flats was higher than that in the natural ones due to deeper permeable layer for purification in the constructed tidal flats. There was an exceptional constructed tidal flat with similar physico-chemical and biological characteristics to natural ones. Shearing stress to the surface of the tidal flat by the flow of seawater was as low as that of natural ones. These hydraulic conditions seemed to be a controlling factor on structures and functions of tidal flats. The control of hydraulic condition seemed to be one of the most important factors to create natural-like tidal flats.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.148-156
• /
• 2011

This paper presents an implementation of autonomous navigation of a mobile robot indoors. It explains methods for map building, localization, obstacle avoidance and path planning. Geometric map is used for localization and path planning. The localization method calculates sensor data based on the map for comparison with the real sensor data. Monte Carlo Localization(MCL) method is adopted for estimation of the robot position. For obstacle avoidance, an artificial potential field generates repulsive and attractive force to the robot. Dijkstra algorithm plans the shortest distance path from a start position to a goal point. The methods integrate into autonomous navigation method and implemented for indoor navigation. The experiments show that the proposed method works well for safe autonomous navigation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.212-219
• /
• 2003

This study is to evaluate the characteristics of SCC at the welded region of high strength steel using acoustic emission(AE) method. Specimens were loaded by a slow strain rate method in synthetic seawater and the damage process was monitored simultaneously by AE method. Corrosive environment was controlled using the potentiostat, in which -0.8V and -1.1V were applied to the specimens. In the case of one-pass weldment subjected to -0.8V, much more AE counts were detected compared with the PWHT specimen. It was verified through the cumulative counts that coalescence of micro cracks and cracks for the one pass weldment with -0.8V were mostly detected. In case of the one pass weldment subjected to -1.1V, time to failure became shorter and AE counts were produced considerably as compared with that of the two pass weldment. It was shown that AE counts and range of AE amplitude have close relations with the number and size as well as width of the cracks which were formed during the SCC.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.277-283
• /
• 2011

Solid dispersion is mainly used for improved dissolution of poorly water-soluble drugs. Solid dispersion of pranlukast was prepared by spray-drying with plasdone S-630. When pH of water was high, pranlukast was highly soluble in the solubility experiment of solid dispersions with varying pH. The particle size of pranlukast particles in solid dispersions was measured to be in nanometers scale based on particle size analysis. Zeta-potential analysis confirmed the negative charge of solid dispersion. SEM was used to observe the surface of solid dispersion, which confirmed spherical morphology, DSC and XRD confirmed the amorphous nature of solid dispersions. The in vitro test was carried out to find improved dissolution rate of pranlukast solid dispersion in simulated juice gastric and a controlled experiment was carried out to compare pranlukast solid dispersions with a conventional drug (Onon$^{(R)}$), These results showed the dissolution properties of pranlukast solid dispersions prepared by spray drying proper for the oral pharmaceutical formulation.