• 한국전산유체공학회:학술대회논문집
• /
• 1998.05a
• /
• pp.61-66
• /
• 1998

An inverse method for the subsonic and transonic airfoil design was developed using the Euler equations. Two testcases were performed. One was a design of the supercritical airfoil, aiming to be used for the Korean mid-sized (100 passengers class) transport aircraft. The other was the design of an airfoil showing a good cruising performance (L/D ratio) in the high subsonic/transonic flow regimes. These testcases demonstrated the efficiency and the robustness of the developed method.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.81-84
• /
• 2012

항공기 설계에서 중요한 해석 대상중의 하나인 에어포일 NACA 4412 형상을 2차원 난류 점성유동으로 접근하여 일정 받음각에 따른 유동 현상을 실험 결과와 비교해 보았다. 또한, 역압력구배, 유동 박리, 와류 등의 현상이 어디에서 어떻게 생성되는지 해석을 통하여 분석해 보았다.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 2008

Numerical analyses of two-stage turbopump turbines were conducted. One of the candidates for the 1st rotor was selected based on the result of the numerical investigation. Besides, the effects of the stator height on the turbine performance were studied. Finally, the performance of the entire two-stage turbine was predicted by numerical calculation. The result showed that the two-stage turbine produces more specific power than a one-stage turbine.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.35-44
• /
• 2004

In this study, one dimensional aerodynamic and structural study of a partial admission turbo pump turbine was performed. A turbine consists of a nozzle, rotor, outlet guide vanes. The aerodynamic characteristics of each component was derived from the governing equation and validated from the CFD calculations. One-dimensional basic design such as velocity triangles was conducted from the mean line analysis and modified from the 2-D and 3-D CFD analysis. The blade profile was determined by the CFD optimization. The thermal stress analysis and structural analysis are needed to be studied in the next design stage.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.34.1-34.1
• /
• 2011

풍력발전기 블레이드 설계에 적용하기 위한 에어포일의 선택 혹은 설계에 있어서 가장 중요한 요소 가운데 하나는 표면 거칠기 변화에 따른 에어포일 성능의 민감도이다. 블레이드 표면은 대기 중의 먼지, 곤충 시체 등에 따라 계속적으로 오염되며 이는 에어포일의 설계 당시의 성능을 계속적으로 저감시킨다. 이러한 표면 거칠기의 증가는 에어포일의 종류에 따라 성능을 50% 이상 저감시키며 이는 블레이드의 설계 성능을 저감시키므로 블레이드 설계를 위한 에어포일 선정 단계에서 표면거칠기 민감도가 가능한 낮은 에어포일을 선정하여 블레이드의 공력 설계를 수행하게 된다. 본 연구에서는 표면 거칠기 변화로 인한 에어포일의 성능 저감이 실제 블레이드의 성능에 어떠한 영향을 주는지를 살펴 보았다. 에어포일은 표면이 깨끗한 상태와 ZZ 테입을 부착하여 표면이 심각하게 오염된 상황을 모사하여 두 경우 모두를 풍동 시험한 DU 에어포일 시리즈를 선정하였다. 3MW 급의 블레이드에 대하여 두께비 40%~18%의 에어포일을 적용하여 설계를 수행하였으며 두께비 30%~18%에어포일에 대하여 표면이 깨끗한 경우와 오염된 경우의 데이터를 적용하여 블레이드 성능 변화 및 다른 성능 변수들의 변화를 살펴보았다. 블레이드 성능에 대하여는 BEMT를 적용하여 설계 및 시뮬레이션을 수행하였다. 연구 결과 에어포일의 성능 저하는 블레이드 공력 효율에 있어서 8%의 저감을 나타내며 7%의 극한하중 저감을 보이는 것으로 나타났다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.94-102
• /
• 2004

An experimental study on a rotating turbine is conducted with various incidence angles in order to find an optimum incidence angle. The incidence angle is an important design parameter in turbine blade design. however, most of experiments were conducted in a linear or annual cascade row. The suggested incidence angles from the experiments conducted in cascade rows could be unsuitable as a design parameter in the design of rotating parts. In this study, various incidence angles are applied and the turbine performance is measured in a rotating state. Experimental results show that the incidence on the rotor has a great influence on the turbine efficiency. The range of applicable incidence becomes narrow when the turbine operates at high input power. In the case of the tested rotor, the optimum incidence is about $-12^{\circ}$.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.6
• /
• pp.7-16
• /
• 2007

An axial-type fan which operates at the relative total pressure of 671Pa and static pressure of 560Pa with the flow rate of $416.6m^3/min$ is developed with an optimization technique based on the gradient method. Prior to the optimization of fan blade, a three-dimensional axial-type fan blade is designed based on the free-vortex method along the radial direction. Twelve design variables are applied to the optimization of the rotor blade, and one design variable is selected for optimizing a stator which is located behind of the rotor and is used to support a fan driving motor. The total and static pressure are applied to the restriction condition with the operating flowrate on the design point, and the efficiency is chosen as the response variable to be maximized. Through these procedures, an initial axial-fan blade designed by the free vortex method is modified to increase the efficiency with the satisfaction of the operating condition. The optimized fan is tested to compare the aerodynamic performance with an imported same class fan. The test result shows that the optimized fan operates with the satisfaction of restriction conditions, but the imported fan cannot. From the experimental and numerical test, they show that this optimization method improves the fan efficiency and operating pressures of a fan designed by the classical fan design method.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.44-54
• /
• 2019

In many countries, there are needs of new transportations to replace ground congestions due to growing number of cars. In addition, the increase in the number of cars held by economic growth will further increase traffic congestion in the future. To overcome this problem, many researches have been performed for personal air vehicle (PAV). In this study, the wing loading and the power-to-weight ratio that are major design parameters for the sizing of roadable PAVs were calculated for different kinds of airfoil and engine types. I.e., in the sizing process, the study was conducted to determine the design point using the graphs of wing loading, power-to-weight ratio, brake horse power, and fuel efficiency for the given mission profiles considering domestic environments and the FAR PART 23 which is the GA class aircraft certification standard. As a result of sizing, using diesel engine require high maximum take-off weight, wing area, and power compared to gasoline engine due to more engine weight.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.24-31
• /
• 2001

An axial-type turbine design technology is developed. In order to design one-stage turbine, the preliminary design method is applied, and then design parameters are chosen after analyzing gas properties within the turbine passage using the streamline curvature method. Stator blade is designed using C4 profile, and rotor blade is designed using shape parameters. Stator is manufactured as an integral type and rotor is manufactured to be disassembled from the disc for changing blade incidence angle. The output power from the rotor is measured with various RPM and input power. Experimental results show that the maximum efficiency of turbine rotor is obtained on the design point, and the output power is proportionally decreased with the negative incidence angle even the test turbine is a reaction turbine. The efficiency of turbine rotor is decreased to 5% by $7.5^{\cire}$ negative incidence angle from the designed value.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.581-593
• /
• 2017

In order to develop high efficiency propeller for multicopter type UAV, we designed, analyzed and tested aerodynamic and structural dynamics. For the design of the high efficiency propeller, the optimum design method was applied for the determination of the airfoil and the three-dimensional planform is designed to reduce induced power of the propeller. The flight suitability of the derived shape was determined through structural design and analysis. The rotation test was performed to confirm the performance of the analytically designed shape. In this paper, we propose a procedural propeller design methodology using these design analysis test methods.