• Journal of Science Education
• /
• v.41 no.3
• /
• pp.318-333
• /
• 2017

In this study, we analyzed activities in life science chapters of middle school 'science' textbooks for the 2009 revised Korea national curriculum and examined the difference between the analysis based on scientific practices and the analysis based on inquiry skills. As a results, there was a lot of inquiry skills in the order of 'reasoning', 'observing', 'classification' in the all of grade. In scientific practices, 'data analysis and interpretation' and 'constructing explanations and devising problem solving' were biased. This shows that life science inquiry activities in middle school 'science' textbooks are lacking in diversity in scientific practice elements as well as inquiry skills, and that the goals of the activities are limited. In addition, through the interrelationships between scientific inquiry skills and scientific practice elements, we examined contents relevance in the transition from inquiry function center to scientific practice, and compared with the results of inquiry activities in textbook, The results of this study were matched monotonously due to the tendency to basic inquiry-data interpretation / basic inquiry-explanation. This comes from results of the lack of diversity in activities presented in middle school 'science' textbooks. In this study, it is suggested that efforts should be made to include diverse scientific practice elements in the process of realizing 2015 revised Korea national curriculum from the simple and diversity-less inquiry activity through analyzing the textbooks of the 2009 revised Korea national curriculum.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.145-150
• /
• 2020

The provision of information on the profitability and efficiency during the transition from growing rice to substitute crops is an essential task for the proliferation and settlement of the production adjustment system. First, the profitability of the soybean + barley cropping system was analyzed. The average income of the farms with the soybean + barley cropping system surveyed was 868,000 Won, with an income proportion of 55.1%. With earned income that is approximately 1.7 times higher than that of growing only rice, it is determined to be more profitable. Then, the efficiency of the farms was analyzed through DEA analysis. The efficiencies of the farms were found to include the CCR model (0.927815) and the BCC model (0.97544). It was also found that there are 10 CCR and 14 BCC results with an efficiency value of 1. With an efficiency value of more than 0.9 on average, it can be deemed as efficient management in general. In addition, by presenting a proposal for the improvement of inefficient farms, the target value was provided in order for inefficient farms to become efficient farms.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.10
• /
• pp.520-529
• /
• 2005

A feature-based 3D modeling algorithm is presented in this paper. Since conventional methods use depth-based techniques, they need much time for the image matching to extract depth information. Even feature-based methods have less computation load than that of depth-based ones, the calculation of modeling error about whole pixels within a triangle is needed in feature-based algorithms. It also increase the computation time. Therefore, the proposed algorithm consists of three phases, which are an initial 3D model generation, model evaluation, and model refinement phases, in order to acquire an efficient 3D model. Intensity gradients and incremental Delaunay triangulation are used in the Initial model generation. In this phase, a morphological edge operator is adopted for a fast edge filtering, and the incremental Delaunay triangulation is modified to decrease the computation time by avoiding the calculation errors of whole pixels and selecting a vertex at the near of the centroid within the previous triangle. After the model generation, sparse vertices are matched, then the faces are evaluated with the size, approximation error, and disparity fluctuation of the face in evaluation stage. Thereafter, the faces which have a large error are selectively refined into smaller faces. Experimental results showed that the proposed algorithm could acquire an adaptive model with less modeling errors for both smooth and abrupt areas and could remarkably reduce the model acquisition time.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.110-110
• /
• 2010

2009년 7월 23일-24일 양일간의 APEC MTF 컨퍼런스는 APEC 회원 경제가 아시아-태평양지역에서 광업부문의 지속가능한 발전의 주제를 토의할 기회를 제공했다. 본 컨퍼런스는 APEC의 광업부문의 지속가능한 발전이라는 프로젝트의 중요 부분이며 컨퍼런스의 활발한 참여는 프로젝트의 성공을 증진시켰다. 지속가능한 발전에 대한 안건이 수년간 APEC의 핵심부분이었으며, 특히 광업장관(MRM)회의에 상정되어 왔다. 2004년 6월 칠레 안토파가스타의 제1차 회의에서, 광업장관들은 APEC 지역에서 광업 및 금속산업의 지속가능한 발전은 부를 창출하고, 환경사업을 창출하며, 사회적으로 책임있는 발전을 도모하며 사회를 위한 향상된 가치를 만들어낸다는데 동의했다. 초기의 action item들 중에서 지속가능한 발전에 있어서 광물 및 금속의 기여를 규명하는 것도 있었다. 광업에 있어서 지속가능한 발전에 대한 안건의 토의는 2005년 10월 한국의 경주 제2차 APEC MRM 회의에서 속계되었다. 관련된 action task는 채광 후 토지운영 뿐만 아니라 에너지 효율기술, 광업 오염 통제 기술과 같은 환경친화적인 채광기술에 대한 정보교환 및 협조를 독려하는 것이었다. 2007년 호주 퍼스의 제3차 회의에서 APEC MRM 회의는 특히 지구화의 시대에 APEC 지역 광물자원의 지속가능한 발전에 대한 긴밀한 지역적 협조에 대한 필요성을 인지하고 있다. 장관들은 역시 광업부문에서 지속가능한 발전에 대한 APEC 위상을 정립하기 위한 작업을 주도하기로 했으며 APEC 경제의 공통관심사를 UNCSD에 반영키 위한 자료제공을 하기로 결정했다. APEC 광업분야의 지속 가능한 개발에 관한 APEC MTF회의는 호주, 캐나다, 칠레, 중국, 인도네시아, 일본, 말레이시아, 파푸아 뉴기니, 페루, 필리핀, 한국, 러시아, 싱가포르, 타이완, 태국, 미국, 베트남에서 자신들의 지속 가능한 개발을 위한 활동에 관한 발표나 의견을 제시하였다. 세계 은행이나 AIM에서도 발표를 하였다. 중요한 소주제들은 다음과 같다. $\cdot$ APEC MTF가 APEC 광업분야의 지속 가능한 발전을 추구하는데 있어 적절한 포럼이라는 것 $\cdot$ 기업들이 사회적 책임(CSR)을 성실히 이행할 필요가 있다는 것 $\cdot$ 수자원과 인적자원의 부족을 다룰 필요가 있다는 것 $\cdot$ 적절한 광산 복구가 필요하다는 것이다. 한국은 "광업분야의 지속가능한 발전을 위한 환경과 광업간의 균형"이라는 프로젝트 아이디어를 제안했다. 인도네시아와 말레이시아는 한국측 프로젝트 수행의 중요성을 강조했다. 러시아 연방은 "광업에 있어 투자 활성화"라는 프로젝트 아이디어를 제안했다. 이 관점에서 MTF는 APEC 투자전문가 그룹과의 협력을 지지했으며 이 포럼간 활동을 활성화시키기 위하여 APEC 사무국에 요청했다. 이 프로젝트는 세계 광업분야의 투자를 증진시키는 최적관행 분석에 따라 제안될 것이고 수행될 것이다. 말레이시아는 광업 및 광업 산업의 지속가능한 발전지시자를 위한 역량구축 프로젝트를 제안했다. 태국은 말레이시아의 제안을 지지했으며 공동프로젝트를 제안했다.

• The Journal of Fisheries Business Administration
• /
• v.34 no.1
• /
• pp.157-183
• /
• 2003

유류오염 사고를 사전에 예방할 수 있는 정책 수단으로는 여러 가지가 있지만 주요한 것으로는 인센티브제의 활용을 들 수 있다. 유류오염 사고를 예방하고 관리하기 위한 인센티브는 유출 사고로 인해 발생한 해양자원의 피해에 대해 가해자에게 배상책임(liability for losses due to spills)을 부과함으로써 제공될 수 있다. 유류오염 사고로 인한 피해액을 실제 화폐단위로 계량화하는 작업은 배상책임 부과제도를 정책수단으로 활용하기 위해 해결해야 할 가장 어려운 과제이다. 따라서, 최근 미국과 캐나다를 중심으로 발전하고 있는 자연자원 피해에 대한 가치 평가법(Natural Resource Damage Assessment : NRDA)은 배상책임 부과제도를 정책적으로 보완할 수 있는 이론적 도구로 간주되고 있다. NRDA는 잠재적인 가해자들에게 그들이 자연환경을 보존해야 하는 사회적 의무를 이행하지 못하고 이를 훼손하게 될 때 이로 인해 발생하는 모든 사회적 비용을 직접 부담해야 한다는 명확한 재무적 인센티브(financial incentive)를 부여함으로써 가해자 보상 원칙 (polluter pays principle)을 실현 할 수 있게 한다. 본 연구는, 유류오염 사고로 인한 환경자원 피해의 경제적 가치를 추정하는 가장 중요한 이론적 모형으로 활용되고 있는 가상상황평가법(CVM)에 대한 기초 개념과 이론적 체계, 그리고 이를 실제 피해액 추정에 성공적으로 적용시키기 위해 해결해야 할 문제점 등을 다루었다. 이를 위해, 본 연구에서는 1988년 캐나다 북서부 연안에서 발생한 Nestucca 유류오염 사고를 사례연구의 대상으로 선정하고, 사고 당시 캐나다 연방정부와 British Columbia 주정부를 대신하여 해양오염에 의한 환경피해의 경제적 가치를 추정한 미국의 컨설팅 회사인 RCG/Hagler, Baily Inc.의 가상상황평가법(CVM) 적용 사례를 분석 검토하였다. Nestucca 사례연구에서는 이들 연구자들이 실제로 활용한 설문지 설계, 설문방법 및 표본설계 등을 분석하였으며, 또한 CVM이 본질적으로 갖고 있는 방법론적 문제점들을 연구자들이 어떻게 해결하려고 했는가를 고찰하였다. 그리고, WTP 추정을 위해 RCG 연구자들이 사용한 사전규제접근법(ex ante regulatory approach)으로 인해 야기될 수 있는 환경자원 피해액 추정 방법의 한계점도 함께 검토하였다. 캐나다 연방정부와 British Columbia 주정부는 Nestucca 유류오염 사고로 인한 자연 자원 피해에 대한 손해배상으로 $4.3 Million의 보상금을 지급 받게 된다. 캐나다 정부는 이 보상금으로 Nestucca Oil Spill Trust Fund를 설립하여 피해를 입은 자연자원의 원상회복(restoration)을 위한 다양한 연구 프로젝트에 자금을 지원하고 있다. Nestucca 유류오염 사고를 계기로 캐나다 정부와 학계는 해양자원의 피해에 대한 경제적 가치평가와 자원의 원상회복에 대한 체계적인 접근 방안을 처음으로 마련 시행하게 되었다는 점에서, Nestucca 유류오염 사고에 대한 사례연구는 캐나다의 해양환경 보존 정책을 연구하는 출발점으로 평가될 수 있을 것이다. 이에 비해, 우리나라에서 대표적인 유류오염사고로 알려져 있는 시프린스호 사고와 관련된 손해배상금은 주로 연안어민들의 어업피해 배상으로 이루어져 있으며, 간접피해에 대한 배상액 48억 5천만원도 대부분 치어방류, 여수대학교 종묘배양장건립 등 피해지역 연안어업 발전을 위한 사업에 투자되었다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.3
• /
• pp.253-266
• /
• 2016

In accordance with the classification system of radioactive waste in Korea, all the disused sealed radioactive sources (DSRSs) fall under the category of EW, VLLW or LILW, and should be managed in compliance with the restrictions for the disposal method. In this study, the management and disposal method are drawn in consideration of half-life of radionuclides contained in the source and A/D value (i.e. the activity A of the source dividing by the D value for the relevant radionuclide, which is used to provide an initial ranking of relative risk for sources) in addition to the domestic classification scheme and disposal method, based on the characteristic analysis and review results of the management practices in IAEA and foreign countries. For all the DSRSs that are being stored (as of March 2015) in the centralized temporary disposal facility for radioisotope wastes, applicability of the derivation result is confirmed through performing the characteristic analysis and case studies for assessing quantity and volume of DSRSs to be managed by each method. However, the methodology derived from this study is not applicable to the following sources; i) DSRSs without information on the radioactivity, ii) DSRSs that are not possible to calculate the specific activity and/or the source-specific A/D value. Accordingly, it is essential to identify the inherent characteristics for each of DSRSs prior to implementation of this management and disposal method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.13-23
• /
• 2016

Many traffic centers are highly hesitant in employing existing Automatic Incident Detection Algorithms due to high false alarm rate, low detection rate, and enormous effort taken in maintaining algorithm parameters, together with complex algorithm structure and filtering/smoothing process. Concerns grow over the situation particularly in Freeway Incident Management Area This study proposes a new algorithm and introduces a novel concept, the Displaced Flow Index (DiFI) which is similar to a product of relative speed and relative occupancy for every execution period. The algorithm structure is very simple, also easy to understand with minimum parameters, and could use raw data without any additional pre-processing. To evaluate the performance of the DiFI algorithm, validation test on the algorithm has been conducted using detector data taken from Naebu Expressway in Seoul and following transferability tests with Gyeongbu Expressway detector data. Performance test has utilized many indices such as DR, FAR, MTTD (Mean Time To Detect), CR (Classification Rate), CI (Composite Index) and PI (Performance Index). It was found that the DR is up to 100%, the MTTD is a little over 1.0 minutes, and the FAR is as low as 2.99%. This newly designed algorithm seems promising and outperformed SAO and most popular AIDAs such as APID and DELOS, and showed the best performance in every category.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.137-167
• /
• 2007

This paper is aimed to study the late Neolithic Age in North Korea in order to closely examine a transition process into the Bronze Age in the Korean peninsula. Thus, the pottery with lightning design was selected as target data. Since the pottery with lightning design is fundamental data that North Korea's archeologists have used for chronological recordings of the late Neolithic Age in the northwest region, the parallel relationship between the eastern and the western region was established with comparison of pottery with lightning design in the northeastern region. The examination focuses on data that cover the target region of the pottery with lightning design of the adjacent Southern Primorskii region including the counterpart of the northwestern and the northeastern region. As a result, some attribute analyses revealed that the pottery with lightning design was affected by the counterpart of the northwestern region near the Yalu River. Prior to genealogical and chronological recordings of the pottery with lightning design in the northeastern region, the pottery with lightning design in the northwestern region was recorded chronologically in order to examine its specific development process. Consequently, in the second period of the Neolithic Age, the pottery with lightning design in the northwestern region was assumed to have an impact on the counterpart in the northeastern region. The classification of the pottery with lightning design in the northeastern region shall be based on 4-period development. According to this classification, the pottery, which was found in the Tumen river basin, was thought to belong to the first period. The pottery went through genealogy differentiation in the second period and when entering into the third period, the pottery spread to inland of south Primorskii. The pottery was assumed to exist in the southern Primorskii region until the tip end (the fourth period) of the Neolithic Age. It is assumed that considering the fact that climate change led to the agriculture movement, Zaisanovka culture, i.e. the late Ne Neolithic Age, moved to the southern Primorskii region along the Tumen River basin.

• The Journal of Korean Philosophical History
• /
• no.50
• /
• pp.171-200
• /
• 2016

The full-scaled study of Joseon conducted by Japan in the 1910s was part of its colonial policy, while the native Joseon studies against it contained political aspiration to recover the national rights and independence. Accordingly, the conceptual meaning of 'Joseon' varied according to its subject of speech. The establishment of modern nation-state failed along with the extinction of Korean Empire, but 'Joseon' was newly discovered within national ideology. It became a historical concept in which the experience of the past and the expectation toward the future could be united. The so-called 'Joseon Studies' was only limited to intellectuals in the academic circle, but 'Joseon' embraced the articulations from more various social agents. Furthermore, it is only natural that 'Joseon Studies' should be interpreted within the historical semantics of 'Joseon', considering the connection between concept and discourse. In his The History of Joseon Civilization, An Hwak encompassed the history from the times of ancient mythology to the contemporary times under the banner of 'Joseon'. Opposing Japanese distortion of history carried out in the name of historical positivism, he idealized Joseon history as comparable to that of the Western democracy. He extended the study of 'Joseon' into culture at large, foreshadowing a kind of Joseon philosophy. In his An Overview of Joseon Philosophical Ideas, the first description of 'Joseon philosophy' as an independent field, he proposed philosophy as one of three sources of pride in Joseon and asserted its uniqueness and originality compared to the West. It was an attempt to grasp the peculiarity of Joseon ideas from a perspective of the history of universal human civilization. He considered 'Jong'(倧) as an ideological foundation held from the ancient to the modern times, and the acceptance of Buddhism and Confucianism as beneficial to 'Joseon philosophy'. The birth of 'Joseon philosophy', the modern transformation of the traditional knowledge system, was an intellectual experiment to apply traditional knowledge to the modern disciplinary classification system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.313-319
• /
• 2022

Complete dentures are one of the most basic treatment methods for the treatment of edentulous patients. The manufacturing process of traditional complete dentures goes through the steps of taking primary impressions, secondary impressions, jaw relation record, trying in wax denture, and final denture insertion. Multiple visits and complex manufacturing procedures are required, and errors may occur in each step. With the development of digital technology, manufacturing steps have been reduced by introducing digital technology to the denture treatment process. In the process of manufacturing dentures by introducing a digital process, a more precise work is possible using Computer-Aided Design, and it is possible to shorten the period of labor and reduce the number of visits. In this case, the anterior teeth arrangement of the patient's existing dentures was transferred to the final dentures using a digital method. After taking impression, try-in dentures were digitally fabricated and tried in the oral cavity to evaluate their retention in the oral cavity. Final dentures were manufactured by milling process. The number of visits was reduced, satisfactory retention and stability of dentures were obtained, and aesthetic recovery was achieved.