• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.257-262
• /
• 2017

In this paper, we proposed a rectangular planar monopole antenna with a double sleeve that applied to a half-cut and a discontinuous feed structure. A rectangular planar monopole antenna with a double sleeve was cut in half along the magnetic symmetry line, and impedance matching was achieved by a discontinuous structure was applied to a feeder and by adjusting the double sleeve gap. We used the HFSS simulator of ANSYS company to confirm the antenna parameter property, and the antenna size was $21{\times}40mm^2$. In the proposed antenna, the simulation frequency range with VSWR of 2 or less was 2.6GHz to 10.25GHz. The bandwidth was 7.65GHz. The frequency range of the fabricated antenna was 3.3GHz to 9.75GHz, and the bandwidth was 6.45GHz. The measured radiation pattern frequencies were 3.5GHz, 5.5GHz, 7.5GHz, and 9.5GHz. A radiation pattern similar to the dipole antenna pattern was obtained at all frequencies.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.161-168
• /
• 2008

We propose a novel bistable nematic liquid crystal cell, which has a dual-frequency liquid crystal material and pixel-isolating polymer wall formed by an anisotropic phase separation of a mixture of liquid crystals and UV-curable pre-polymers. The proposed cell has two stable states of left- and right-handed ${\pi}$-twist. The switching between the two states is achieved by using a sequential waveform of low and high frequencies. A transmissive bistable liquid crystal display is designed, which achieves high contrast ratio by using the proposed cell and optical films.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7B
• /
• pp.907-915
• /
• 2001

본 논문에서는 차세대 이동통신인 IMT-2000 (하향: 1.885GHz∼2.025GHz) 주파수대역에서 동작하는 정사각형 적층구조 마이크로스트립 안테나를 설계 및 제작 측정하였다. 송/수신 주파수대역이 서로 상이한 IMT-2000 주파수대역에서 동작하도록 하기 위해 시뮬레이터를 사용하여 이중공진 안테나를 설계하였으며 최적화된 파라미터를 가지고 실제 제작 및 측정하였다. 측정된 결과는 다음과 같다. 공진주파수는 1.8475GHz, 2.2GHz에서 각각 나타났으며 대역폭은 각각 10.2%와 7.8%에 이르는 결과를 얻었다. 그리고 반사계수는 -18dB, -27dB로 나타났다. 이득은 시뮬레이터를 이용한 결과를 보면 8dB∼10dB의 높은 이득을 얻을 수 있음을 알 수가 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.584-584
• /
• 2013

부유 고조화파 진단법을 이용할 경우에 직렬 커패시터가 달린 프로브에 정현파를 인가하게 되면 자기바이어스가 생긴다. 이런 자기바이어스에 의한 플라즈마 변수 측정에 대한 연구가 진행되어 왔다. 본 연구에서는 아르곤 유도 결합 플라즈마에서 실험을 진행하였으며 서로가 정수 배인 두 개의 주파수를 이용하였다. 이 두 개의 주파수를 평판형 프로브에 인가하여 각각 주파수의 위상 차이에 따라 자기바이어스를 측정하였다. 이 측정값은 이론적으로 구한 위상 차이에 따른 정현파 곡선과 잘 일치하였다. 또한 측정된 자기바이어스를 이용하여 플라즈마 변수를 계산하였으며 이는 랑뮤어 프로브로 측정한 결과와 비슷한 경향성이 나타남을 확인 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.580-580
• /
• 2013

공정 플라즈마에서 사용할 수 없는 단일 랭뮤어 탐침법의 단점을 극복하기 위해서 부유 고조화파 탐침법이 개발되었고, 개선되어왔다. 다중 주파수를 인가하여 발생하는 고조화파 신호들 중 상호간섭주파수의 진폭을 이용하는 Sideband 방법과 원신호의 주파수 진폭을 이용하는 이중 주파수 방법이 있는데, 본 연구에서는 위와 같이 응용된 방법들과 기존의 부유 고조화파 탐침법의 장단점을 파악하고, 차이점을 규명하였다. 플라즈마 변수를 이끌어내기 위해 사용된 베셀함수의 민감도를 통해 특정 전자온도 영역에서의 각 방법들의 신뢰성을 비교해보았고, 측정값에서의 차이를 주파수 응답 특성 차이 및 전자 에너지 분포의 차이로 설명하였다. 이런 비교 연구를 통해 상황 별 적합한 측정 방법을 선택적 이용할 수 있을 뿐만 아니라, 이를 통해 측정하는 플라즈마 변수의 신뢰성을 향상시킬 수 있을 것으로 예상된다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.127-132
• /
• 2006

This paper presents a dual-mode amplifier which operates as amplifier or frequency multiplier according to the input frequency. It satisfies the 802.11a/b/g frequency band of wireless LAN standard. A conventional dual-band wireless LAN transmitter consists of the separating power amplifiers operating at each frequency band, but the proposed dual-mode amplifier operates as an amplifier for the 802.11b/g signal and as a frequency multiplier for the 802.11a signal according to each LAN bias condition. The amplifier mode shows the gain of 13dB, the PldB of 17dBm and second harmonic suppression of below -37dBc. And the frequency-doubler mode shows the gain of 3.3dB, the output power of 7.3dBm and third harmonic suppression of below -50dBr.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.175-180
• /
• 2010

In this paper, we have investigated ultrahigh frequency nano-mechanical resonators, made of DWCNTs with various wall lengths, via classical molecular dynamics simulations. We have aimed our analysis on the frequency variations of these resonators with the DWCNT wall lengths. The results show that the variations can be well fitted by either the Pearson VII function when the resonant frequency of normalized by its maximum frequency is plotted as a function of the inner/outer wall length ratio L5/L10 for different values of the outer wall length L10, and the Gauss distribution function when the resonant frequency of normalized by its maximum frequency is plotted as a function of the outer/inner wall length ratio for different values of the inner wall length.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.16-21
• /
• 2013

Recently, frequency synthesizers are being designed in two ways narrow-band loop or dual-loop for wide-band to reduce the phase noise. However, dual-loop has the disadvantage of center frequency mismatch and requiring an extra loop. In this paper, we propose a new structure that supports a range of 800Mhz ~ 3Ghz with multiple control of the single-loop frequency synthesizer without another loop. The control voltage of the VCO(coarse, fine) will be fixed, and finally the VCO will have a low Kvco. The frequency synthesizer is simulated using UMC $0.11{\mu}m$ process, proposed frequency synthesizer can be used in a variety of applications in the future.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.481-487
• /
• 2008

Ship's wireless LAN was in the limelight as equipment of ease, cost reduction, various func tion al i ty. In the paper, a dual-bandpass filter for wireless LAN has proposed, which was designed by using dual-mode square loop resonator with square patch in compliance with 2.4 GHz and 5 GHz band of wireless LAN. The dual-bandpass filter could be designed by adjusting sizes of one perturbation element and three of reference elements in compliance with the frequency bands of 2.4 GHz and 5.8 GHz, Furthermore, new dual-bandpass filter was also designed by adjusting stopband of using open stubs in compliance with the frequency bands of 2.4 GHz and 5.2 GHz. The measured results for the fabricated dual-bandpass filters agreed well with the simulated ones, and hence, it was confirmed that the proposed design method is valid.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

In this paper, we propose a film-type dual-band frequency selective structure for improving the wireless communication environment in a building. The proposed frequency-selective structure is a miniaturized structure that can control the resonant frequencies of 2.4 GHz and 5 GHz dual band through simple design parameters. We fabricated the frequency-selective surface by screen printing using conductive ink on a thin transparent film and confirmed its performance by measurement. We analyzed the attenuation performance of the unnecessary signal from the outside when the frequency-selective structure designed using the software to analyze the propagation environment performance is applied to the building. To verify the analytical results, the signal strength of the indoor environment was measured by applying the frequency-selective film fabricated on the inner wall of the actual building. The measurement results show that the dual-band frequency-selective film has 29.4 dB and 15.94 dB attenuation performance in the 2.4 GHz and 5 GHz, respectively.