• Environmental and Resource Economics Review
• /
• v.28 no.4
• /
• pp.527-556
• /
• 2019

In Korea, nearly 100 billion won is spent annually under the name of energy voucher on 600,000 households for the last five years, and this is a unique case and hard to monitor worldwide. Therefore, no studies have been conducted to assess impacts of the energy voucher on energy consumption and cost burden alleviation for beneficiaries. This paper aims to demonstrate the effectiveness of energy vouchers in terms of energy expense. The propensity score matching was conducted on samples of low-income households based on the Korea Welfare Panel. Then, simple Difference-In-Differences and Fixed-Effect Difference-In-Differences models were applied to estimate the effect of energy vouchers. In results, the beneficiaries of energy vouchers would spend an additional 4,371~4,870 won per month on energy consumption. The ratio is equivalent to 51.9~57.7 percent of the aid, which is also the highest when compared with 23~56 percent of U.S. Food Stamp. In terms of energy welfare, voucher payment could become one of the best management practices. However, identifying the blind spots as non-reciprocal households and expanding the differential support mechanism that reflects the energy consumption environment should be solved in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.27-38
• /
• 1997

This paper is concerned with the calculation of the wave resistance for SWATH ships based on a low order Rankine source panel method. Two types of free surface boundary conditions, Dawson type (double model approximation) and Kelvin type (free stream approximation) are used. For the free surface boundary calculation, an analytic differentiation is employed instead of implementing a finite difference scheme. Then, the radiation condition is satisfied by, so called, the panel shift method. The numerical results using the above two methods are compared with those using the thin ship/modified slender body approximation and also with the experimental results. The SWATH models considered are a single strut SWATH and a twin strut SWATH together with the variations of two demihull separation distance. In order to prove the validity of the program developed, the numerical calculations for a Wigley mono hull and Wigley twin hulls are compared with the available experimental results.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.32-42
• /
• 1990

The method using Rankine Soure distribution over the hull surface and undisturbed free surface was applied to calculate the free surface flow around a ship. The ship hull as well as a local portion of the undisturbed free surface arc geometrically represented by quadrilateral panels and the source density is determined so as to satisfy the linearized free surface condition based on the double model flow. The pressure distribution, wave resistance, wave profile and hydrodynamic sinkage force and trim moment for the Wigley hull and the Series 60 hull with $C_B=0.60$ were calculated in the fixed condition. The calculated results were compared with the measured values. The dependance of the solution on the panel arrangement, particularly on the free suraface, was also studied through 11 numerical test cases for the Wigley hull.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.245-254
• /
• 2018

Impact of tropospheric correction techniques on accuracy of the GPS (Global Positioning System) derived ellipsoidal heights has been experimentally assessed in this paper. To this end, 247 baselines were constructed from a total of 88 CORS (Continuously Operating Reference Stations) in Korea. The GPS measurements for seven days, acquired from the so-called integrated GNSS (Global Navigation Satellite Systems) data center via internet connection, have been processed by two baseline processing software packages with an application of the empirical models, such as Hopfield, modified Hopfield and Saastamoinen, and the estimation techniques based on the DD (Double-Differenced) measurements and the PPP (Precise Point Positioning) technique; hence a total number of the baseline processed and tested was 8,645. Accuracy and precision of the estimated heights from the various correction schemes were analyzed about baseline lengths and height differences of the testing baselines. Details of these results are summarized with a view to hopefully providing an overall guideline of a suitable selection of the modeling scheme with respect to processing conditions, such as the baseline length and the height differences.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.76-88
• /
• 2017

The urban park plays important roles in protecting the urban landscape and improving citizens' health, recreation, and the emotional life. Above and beyond these roles, the urban park is expected to rearrange urban spatial structures as a kind of urban system. The purpose of this paper is to identify empirically to change urban spatial structures by construction of the urban park. This study regards gentrification around the urban park as a process to change urban spatial structures. The gentrification means the regeneration and upgrading of deteriorated urban property by the middle class or commercial developers. The site of case analysis is the Seoul Forestry Park in Sungdong-gu, Seoul. The Seoul Forestry Park is regarded as a representative urban park of Seoul, and caused gentrification around park after the 2005 opening. This study operationally defines the gentrification index and the accessibility index from an urban park and offers an empirical analysis of relation among the urban park, the gentrification and urban spatial structure in a statistic district which is the minimum unit of Korean statistic data in 2000, 2005, and 2010, using Difference-in-Difference method and linear probability model. The results of this empirical study show that the Seoul Forestry Park changes urban spatial structures by gentrification. It reverses a trend of migration of gentrifiers before and after construction of the Seoul Forestry Park. It suggests urban park construction as an alternative method for urban regeneration by inducing the middle class into the inner city of Seoul.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.3
• /
• pp.223-231
• /
• 2020

Governments and private companies have established various local entrepreneurial infrastructure institutions in most regions in order to reduce youth unemployment, and boost youth entrepreneurship and regional employment. However, previous studies has been limited to explore the impact of the entrepreneurial infrastructure institutions on the willingness of start-up entrepreneurs. Thus, the main purpose of this study is to fill in the gaps of the research, identify the effect of the entrepreneurial infrastructure institutions on regional employment focusing on the Partner Squares which are entrepreneurial infrastructure institutions in several regions and established by N company, and set a foundation for further research regarding the effectiveness of the entrepreneurial infrastructure institutions. In order to verify the effectiveness of the Partner Squares on the local employment, we use the raw data of the Economically Active Population Survey (Statistics Korea) and analyze the effectiveness by using the Difference-in-Differences model. The main findings are as follows. While the Partner Square Seoul has not statistically influenced on the employment of local youth workers, the Partner Square Busan has increased about 3% of the average number of employees (575 thousand) from May 2017 to July 2019, increasing the number of local youth workers by 17,000. Also, after the establishment of the Partner Square Gwangju, the institution has increased 4,500 local employees, which is about 1.7% of the average number of employees (267,000) from September 2018 to July 2019. This implies that the Partner Squares provide a variety of effective start-up education programs and networks for pre-starters and founders in the region, thereby helping them to grow and boosting the local employment. An important implication is that by using government statistical data, we find roles of entrepreneurial infrastructure institutions to revitalize local economy and employment. In future studies, studies need to be conducted considering various exogenous variables that can affect local employment, such as the government industrial policies and entrepreneurial infrastructure institutions other than the Partner Squares.

• The Journal of Engineering Geology
• /
• v.24 no.2
• /
• pp.261-271
• /
• 2014

An almost permanent anchor (friction type) is resistant to ground deformation due to the friction between the soil and grout at a fixed length from the anchor body. The purpose of this study is to calculate the force of bearing resistance for a bearing anchor in enlarged boreholes. We conducted analytical and numerical analyses, along with laboratory testing, to find the quantities of bearing resistance prior to grouting in EBA (Enlarged Bearing Anchor) construction. The force of bearing resistance from the analytical method was defined as a function of general borehole diameter, expanded borehole diameter, and soil unconfined compressive strength. We also employed the Flac 3D finite difference numerical modeling code to analyze the bearing resistance of the soil conditions. We then created a laboratory experimental model to measure bearing resistance and carried out a pull-out test. The results of these three analyses are presented here, and a regression analysis was performed between bearing resistance and uniaxial compression strength. The laboratory results yield the strongest bearing resistance, with reinforcement 28.5 times greater than the uniaxial compression strength; the analytical and numerical analyses yielded values of 13.3 and 9.9, respectively. This results means that bearing resistance of laboratory test appears to be affected by skin friction resistance. To improve the reliability of these results, a comparison field study is needed to verify which results (analytical, numerical, or laboratory) best represent field observations.

• KDI Journal of Economic Policy
• /
• v.36 no.4
• /
• pp.135-169
• /
• 2014

This study empirically analyzes changes in production patterns of farmers by agricultural disaster insurance. The aim of this project is to achieve stability of farm management by paying insurance in case of a natural disaster. However, it causes farmers to change production patterns in the direction of increasing production, and leads the crop price to drop. This can be explained by producers' risk reduction through the disaster insurance. The empirical analysis is based on IV approach with using two stage least squares method. The first stage estimates by difference-in-differences methodology indicate that the production of insurable crops increases more about 80,000ton on average than that of non-insurable crops. In addition, to solve the endogeneity problem caused by general supply and demand model, I use the first stage estimates and find that the price index of the crops drops about 2.3% according to the production increase by 10,000ton. The credibility of these results is also attained by various robustness checks. These findings suggest that it is necessary for government to analyze the whole economy which consists of producer and consumer welfare when it determines the policy. Besides, it implies that it is essential to develop a new market to cope with the unintended effect.

• Journal of Technology Innovation
• /
• v.28 no.2
• /
• pp.63-100
• /
• 2020

This study analyzes the effectiveness of government supported R&D program for SMEs by measuring TFP improvements. We estimate TFP for Korean companies from 2011 to 2018 using Levinsohn and Petrin (2003) method which reduces endogenous problem. Then government R&D beneficiary companies were extracted from the NTIS and linked to TFP estimates. The empirical results are as follows. First, as a result of estimating production function, the contribution of TFP to value-added is more important than in the past. Second, the TFP gap between large firms and SMEs continues to wide and there is no sign of easing.(from 3.72 times in 2011 to 5.23 times in 2018). Third, SMEs beneficiaries show higher TFP level than non-beneficiaries. However their TFP was on the decline until government support. After government supported R&D program, it reverses upward. Fourth, although one-year TFP improvement of beneficiaries is bigger than non-beneficiaries, it is smaller than the control group through PSME. Because SMEs participating in government R&D programs had showed downward trend of TFP until R&D program, it is necessary to examine whether there is a fundamental discordance between the demand of SMEs for R&D program and governments policy goal. More sophisticated program design will be required to escape the recognition that government R&D programs for SMEs are just charity.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.137-146
• /
• 2012

In SCM(Supply Chain Management), a management paradigm where the customer satisfaction is to be achieved by minimizing the cost, reducing the uncertainty, and obtaining the overall optimization. As it performs the integrated operation of the paths of information, assets, and knowledge from the raw material providers to the retailers, the adoption of RFID(Radio Frequency Identification) in SCM could be expected to magnify the effectiveness of the system. However, there is a huge risk by deciding whether or not RFID system is adopted without the objective analysis under the uncertain circumstances. This research paper presents the statistical analysis methodologies for the comparison of RFID with Barcode on the aspect of utility and the statistical analysis tool, RUSAT, which was programmed for nonstatisticians' convenience. Assuming a pharmaceutical industry, this paper illustrates how the data were entered and analyzed in RUSAT. The results of this research are expected to be used not only for the pharmaceutical related company but also for the manufacturer, the whole-saler, and the retailer in the other logistic industries.