• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.6
• /
• pp.821-828
• /
• 1990

A forward error correction (FEC) technique is presented for speech data in 16 Kbps digital mobile communications. 14Kbps SBC-APCM(AQB) and QPSK are used as speech coding and modulation techniques, respectively. Because each bit in a speech data block had different importance, applying FEC to speech data bit-selectively in more effective than applying FEC to all speech data equally. To select bits in a speech data block to be protected by FEC the bit error sensitivity of each bit is computed. For a few BCH and Reed-Solomon codes used as bit-selective FEC the performance of the coding technique is computed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1177-1183
• /
• 1995

This paper proposes a new modulation scheme of $\pi$/4-DQPSK with stepped phase for a frequency selective fading channel. In the proposed modulation scheme, the phase of transmitted signal is shifted in the mid of a symbol duration in order to reduce the effect of multipath delay spread. It reduces the irreducible error of $\pi$/4-DQPSK over a frequency selective fading channel. It is shown that $\pi$/4-DQPSK with stepped phase achieves smaller average bit error probability than regular $\pi$/4- DQPSK by simulation. The former achieves much smaller average bit error probability than the latter for small TEX>${\tau}/T_{s}$.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.125-126
• /
• 2008

기존의 후가공에 의한 방염, 발수, 항균 가공물은 원단의 표면에 부착된 방염제로 인하여 다른 기능성 가공의 성능이 급격히 저하되므로 항균성이나 발수성을 함께 나타내기 어려웠으나, 본 연구에서는 THPC-UREA와 암모니아 기상중합 기술을 이용하여 섬유의 내부 피브릴층에 고내구성 방염성을 부여한 후, 불소계 발수제와 침상구조의 4급 암모늄실란계 항균제를 섬유 표면에 고착시킴으로써 방염성과 발수성, 항균성을 동시에 가지면서 세탁내구성도 우수한 결과를 얻었다.

• Journal of Power System Engineering
• /
• v.18 no.5
• /
• pp.74-79
• /
• 2014

This article aims at investigating the effect of applied load and sliding speed on wear behavior of thermally spraryed STS316 coating. STS316 coatings were fabricated by flame spray process according to optimal parameters on steel substrates. Dry sliding wear tests were performed on STS316 coating using four different applied load as 10, 15, 20 and 25 N and four different sliding speed as 15, 30, 45 and 60 rpm. Wear behavior on worn surface was investigated using scanning electron microscope(SEM) and energy disperive X-ray spectroscopy(EDS). The dominant wear mechanism of STS316 coating under low applied load and sliding speed was oxidation on worn surface. However, under high applied load and sliding speed the principal wear mechanism was abrasion on oxidation film and damage of oxidation film.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.106-111
• /
• 2014

This article describes effect of post heat treatment on wear characteristics of thermally sprayed Co-based self-flux alloy coating. Co-based self-flux alloy coatings were deposited on steel substrates using a flame spray process. Post heat treatments were carried out at 800, 900, 1000 and $1100^{\circ}C$ for 30min in a vacuum chamber. For analysis of effect of post heat treatment on mechanical properties, wear test and hardness test were performed for post heat-treated coating specimen. Microstructures of heat treated coating layer and wear track were examined using SEM and EDS. Wear loss and hardness became lower with increasing post heat treatment temperature.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.24-26
• /
• 2006

The copper foil of 10fm of thickness was prepared, and the surface treatment on the copper foil was done by the method of the electrolytic plating in the acid solution with the sulfate ion as a purpose to remove the main element of the surface contaminant of copper variously. The structure on the surface of the copper foil in this study investigated AFM with SEM the changed phenomenon according to added plating time and current. The phenomenon of the structure's of the oxide on the surface of long plating time and high current growing was confirmed.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.141-148
• /
• 2017

In this study, an advanced form-finding method of tensegrity unit modules is presented to apply on renovation building. Here a fitness function of maximum natural frequency which can lead to a maximum stiffness status was used for a genetic algorithm. To apply the lightweight pin-jointed structure to the renovation project is more economical over to build new structures. In this paper, two types of tensegrity unit are presented to build expanded structures, and their force densities are shown using the proposed form-finding method. The expanded structures which may influence renovation projects are presented by using the tensegrity units.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1299-1307
• /
• 1989

A Korean syllable is regarded as a random variable according to its probabilistic property in occurrence. A Korean syllable is divided into a 'choseong', a 'jungseong', and a 'jongseong' which are regarded as random variables. From the cumulative freaquency of a Korean syllable all possible joint probabilities and conditional probabilities are computed for the three ramdom variables. From the joint probabilities and the conditional probabilities all possible joint entropies and conditional entropies are computed for the three random varibles. Also all possible average mutual informations are calculated for the three random variables. Average mutual informatin between two random variables hss its biggest value between choseong and jungseong. Average mutual information between a random variable and other two random variables has its biggest value between jungseong and choseong-jongseong.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.89-92
• /
• 2001

In this paper, adaptive multi-stage parallel interference cancellation (PIC) receiver is considered for a multi-rate DS-CDMA system. In each stage of the adaptive multi-stage PIC receiver, multiple access interference (MAI) estimates are obtained using the sub-bit estimates from the Previous stage and the adaptive weights for the sub-bit estimates. The adaptive weights are obtained by minimizing the mean squared error between the received signal and its estimate through a least mean square (LMS) algorithm. It is shown that the adaptive multi- stage PIC receiver achieves smaller BER than the matched filter receiver, multi-stage PIC receiver, and multi-stage partial PIC receiver for the multi-rate DS-CDMA system in a Rayleigh fading channel.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.9-12
• /
• 2001

In this paper, the natural space-time coding is applied for a DS-CDMA system with multiple transmit/receive antennas in a Rayleigh fading channel. With difference of arrival times from transmit antennas a modified maximum likelihood (ML) decoding algorithm is proposed for the space-time coded DS-CDMA system. The proposed decoding algorithm performs ML decoding over the transition of two consecutive branches by using a modified branch metric with the partial autocorrelation. By simulation, it is shown that the proposed decoding algorithm achieves significant performance improvement over the ML decoding algorithm without the modified branch metric.