• Imaging Science in Dentistry
• /
• v.36 no.4
• /
• pp.177-182
• /
• 2006

Purpose: To evaluate the diagnostic ability in differentiating between ameloblastoma and odontogenic keratocyst according to the imaging modalities and observers. Materials and Methods: We evaluated thirty-six cases of ameloblastomas and forty-seven cases of odontogenic keratocysts all histologically confirmed. Six oral and maxillofacial radiologists diagnosed the lesions by 3 methods: using panoramic radiograph, using computed tomograph (CT), and using panoramic radiograph and CT. The observers were classified by 3 groups: group 1 had experienced over 10 years in oral and maxillofacial radiologic field, group 2 had experienced for 3-4 years, and group 3 was in the process of residentship. After over 2 weeks, the observers diagnosed them by the same methods. Results: The ROC curve areas except for group 3 were the highest with interpretation using panoramic radiograph and CT, followed by interpretation using CT only, and the lowest with interpretation using panoramic radiograph only. The overall difference was not found in diagnostic ability among groups in using panoramic radiograph only, but there was difference in diagnostic ability of group 1 and 2 vs 3 in using CT only, and combination panoramic radiograph and CT. Conclusions: To differentiate between ameloblastoma and odontogenic keratocyst more accurately, the experienced oral and maxillofacial radiologist should diagnose with combination of panoramic radiograph and CT.

• Imaging Science in Dentistry
• /
• v.39 no.1
• /
• pp.13-18
• /
• 2009

Purpose: This study was designed to determine a proper threshold value and opacity in three-dimensional CT volume rendering of oral and maxillofacial area. Materials and Methods: Three-dimensional CT data obtained from 50 persons who were done orthognatic surgery in department of oral and maxillofacial radiology of Seoul National University retrospectively. 12 volume rendering post-processing protocols of combination of threshold(100HU, 150HU, 221HU, 270HU) and opacity (58%, 80%, 90%) were applied. Five observers independently evaluated image quality using a five-point range scale. The results were analyzed by receiver operating characteristic curves, ANOVA and Kappa value. And three oromaxillofacial surgeons chose the all images that they thought proper clinically in the all of images. Results: Analysis using ROC curves revealed the area under each curve which indicated a diagnostic accuracy. The highest diagnostic accuracy appear with 100HU and 58% opacity. and the lowest diagnostic accuracy appear with 221HU and 58% opacity that are being used protocol in department of oral and maxillofacial radiology of Seoul National University. But, no statistically significant difference was noted between any of the protocols. And the number of proper images clinically that chosen by three oromaxillofacial surgeons is the largest in the cases of protocol 8 (221HU, opacity 80%) and protocol 11 (270HU, opacity 80%) in one after the other. Conclusion: Threshold and opacity in volume rendering can be controled easily and these can be causes of making an diagnostic accuracy. So we need to select proper values of these factors.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.121-133
• /
• 2008

The purpose of this study was to evaluate the role of socioeconomic factors and health behaviors on the prevalence of oral diseases(dental caries and periodontal disease) among Korean adults. Data from the 2005 National Health and Nutrition Examination Survey was analyzed for adults aged over 19 years (n=25,215). Oral disease was defined as disease diagnosed by a dentist for the previous 12 months. Chi-square test and logistic regression analysis were used to conduct statistical analysis. The population without dental caries and periodontal diseases were used as the reference category for all analysis. The overall prevalence of annual dentist-diagnosed dental caries and periodontal diseases were 23.5% and 10.6% respectively. The relative risk of developing dental caries for graduates of middle school and lower were 1.53 times (95% CI: 1.24-1.89) more likely to develop dental caries comparing to college graduates. Low income earners were 1.23 times(95% CI: 1.01-1.49) more likely to develop dental caries than high income earners. Persons covered by national medical insurance were 1.45 times(95% CI: 1.08-1.95) more likely to develop dental caries comparing to persons covered by employee medical insurance. Compared with persons not eating snacks, the risk of developing caries in persons eating snacks once a day was 1.16(95% CI: 1.01-1.32), while those who snacked twice or more a day were 1.19(95% CI: 1.01-1.41). The relative risk of developing periodontal disease was 3.71(95% CI: 2.38-5.80) higher in older individuals than younger. In terms of education level, middle school graduates and lower were 1.54 times more likely to develop periodontal disease than college graduates. Low income earners were 1.47 times more likely to develop periodontal diseases than high income earners. Using data from a large, nationally representative sample of Korean populations, we support the hypothesis that the prevalence of oral diseases is related with socioeconomic factors and health behaviors. More intensive intervention efforts to reduce the prevalence of dental diseases are warranted in Korea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.443-443
• /
• 2014

CIS 박막을 제조하기 위한 방법으로 셀렌화(selenization)방식, MOCVD방식, 동시진공증발(co-evaporation)방식, 전착(electrodeposition)방식 등이 있으나, 이러한 방식을 이용하여 CuInSe2 박막을 제조하는 경우 어떤 방법으로든 다원화합물의 조성 및 결정성을 조절하기가 매우 어려운 단점이 있었다. 기판의 온도를 일정 온도로 유지하도록 하고, 증발원을 가열하여 이에 내포된 물질(이원화합물 또는 단일원소)을 증발시켜 기판에 증착이 이루어지도록 하거나, 기판의 온도를 승온시키고 구리 이원화합물을 내포한 증발원을 가열해 물질을 증발시켜 기판에 증착이 이루어지도록 하는 방법으로 기판에 박막이 형성되도록 한다. 기판의 대면적화로 인해 균일한 박막의 형성이 어려워지고 있으며, 이중 15% 이상의 고효율을 보인 방법은 3-stage process를 이용한 동시진공증발방식으로, Cu, In, Ga, Se 등의 각 원소를 동시에 진공 증발시키면서 조성을 조절하여 태양전지에 적절한 전기적, 광학적 특성을 가지는 Cu(In,Ga)Se2 (CIGS)박막을 증착시키는 방법이다. 일반적으로, 실험실에서 연구되고 있는 장비의 구조는 증발원이 아래에 장착되어서 상향 증착되는 방식이다. 본 연구에서 사용된 장비는 하향 증발원이 측면에 장착되어서 하향 증착되는 방식으로 구성하였다. 증착되는 면방향으로, 적외선온도계(pyrometer)가 설치된 시창(viewport)의 오염 등으로 인하여, 지속적인 공정이 이루어지기 힘든 점을 개선하여 증착기판의 후면에 적외선 온도계를 설치하여 기판의 온도변화를 감지하여 공정에 반영할 수 있도록 하였다. 본 연구에서는 하향식 진공 증발원, 기판후면 온도모니터링모듈 등을 개발 장착하여, CIGS 박막을 제조하였으며, 버퍼층은 moving 스퍼터링법으로 ZnS를 증착하였고, 투명전극층은 PLD(Pulsed Laser Deposition)를 이용하여 제조하였다. 가장 높은 광변환효율을 보인 Al/ZnO/CdS/Mo/SLG박막시료는 유효면적 $0.45cm^2$에 광변환효율 15.65 %, Jsc : $33.59mA/cm^2$, Voc : 0.64 V, FF : 73.09 %를 얻을 수 있었으며, CdS를 ZnS로 대체한 Al/ZnO/ZnS/Mo/SLG박막시료는 유효면적 $0.45cm^2$에 광변환효율 12.45 %, Jsc : $33.62mA/cm^2$, Voc : 0.59 V, FF : 62.35 %를 얻을 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.45-50
• /
• 2000

Objectives : This study was undertaken to evaluate correlation between the levels of hippuric acid in blood plasma (HAP) and those of toluene concentration in the workplace air. Methods : Study subjects were composed of two groups; 21 workers who were occupationally exposed to toluene and 25 rural-area residents who were not exposed to any known occupational toluene source, as an exposed group and a reference group, respectively. Mean age and work duration of the exposed was 42 years and five years, respectively. Mean age of the reference was 42 years. To determine toluene concentrations in the workplace air, air sampling has been conducted for more than six hours using a personal sampler, and analyzed by a gas chromatography-flame ionization detector. Concentrations of hippuric acid in biological samples were determined by a high performance liquid chromatography-ultraviolet detector. Results : Geometric mean(geometric standard deviation) of HAP and hippuric acid in urine(HAU) for the exposed was 1.39(2.21) mg/L and 2.77(1.46) g/L, respectively, which were significantly different from those of the reference [HAP, 9.45(2.94); HAU, 0.37(0.45)]. Teluene concentration in the workplace air was 86.92(range: $45.18\sim151.23$)ppm. The level of HAP or HAU was significantly correlated (r=0.70 and r=0.63, respectively) with that of toluene in the workplace air. The estimated regression equation was logHAP(mg/L)=-3.60+1.93 log(toluene, ppm) or logHAU(g/L)=-0.85+0.67 log(toluene, ppm). The magnitude of correlation was further enhanced when analyzing relationship between toluene concentrations lower than 100 ppm and its corresponding HAP levels. Conclusion : Overall, plasma hippuric acid levels were well correlated with toluene concentrations in the workplace air, and a statistically significant correlation was observed for the samples with toluene concentration lower than 100 ppm.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.1 s.37
• /
• pp.26-33
• /
• 1992

The carpal tunnel syndrome is one of the most common peripheral nerve entrapment syndromes. The typical symptoms are pain, numbness and paresthesia in the median nerve territory of the hand. Recently, it is widely recognized that occupational factor is regarded as the important cause of the carpal tunnel syndrome. Clinical study is performed in the 42 female workers who is repetitively working at packing department in a rayon manufacturing factory from November 1991 till March 1992. The study included a questionnaire, physical examinations, and the neurophysiological test. The summary of the results obtained was as follows : 1. Among 42 packing workers, 9 workers(21.4%) were diagnosed as carpal tunnel syndrome by electromyography. The affected side was bilateral in 4 workers(9.5%), right in 4 workers(9.5%), and left in one worker(2.4%). 2. Among 42 subjects, 28 workers(66.7%) complained the clinical symptoms related to carpal tunnel syndrome, 11 workers(26.2%) showed positive Phalen sign, and 7 workers(16.7%) showed positive Tinel sign. 3. Researchers regard electromyographic finding as the gold standard for diagnosis of carpal tunnel syndrome. The sensitivity and specificity of the clinical symptoms to diagnose the carpal tunnel syndrome were 0.89, 0.39 respectively. If the carpal tunnel syndrome is diagnosed by the combination of the positive findings of the symptoms and the physical examinations, either Tinel or Phalen sign, the sensitivity and specificity were 0.67 and 0.76 respectively. Considering above results, though this small number of workers is not adequate for epidemiologic conclusions, carpal tunnel syndrome seems to be an important occupational disorder among packing workers in a rayon manufacturing factory.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.101-110
• /
• 2015

Synthetic Aperture Radar Interferometry (InSAR) is affected by various noise source such as atmospheric artifact, orbital error, processing noise etc.. Especially, one of the dominant noise source for long-wave SAR system, such as ALOS PALSAR (L-band SAR satellite) is the ionosphere effect because phase delays on radar pulse through the ionosphere are proportional to the radar wavelength. To avoid misinterpret of phase signal in the interferogram, it is necessary to detect and correct ionospheric errors. Recently, a MAI (Multipler Aperture SAR Interferometry) based ionospheric correction method has been proposed and considered one of the effective method to reduce phase errors by ionospheric effect. In this paper, we introduce the MAI-based method for ionospheric correction. Moreover we propose an efficient method that apply the method over non-coherent area using directional filter. Finally, we apply the proposed method to the ALOS PALSAR pairs, which include the west sea coast region in Korea. A polynomial fitting method, which is frequently adopted in InSAR processing, has been applied for the mitigation of phase distortion by the orbital error. However, the interferogram still has low frequency of Sin pattern along the azimuth direction. In contrast, after we applied the proposed method for ionospheric correction, the low frequency pattern is mitigated and the profile results has stable phase variation values within ${\pm}1rad$. Our results show that this method provides a promising way to correct orbital and ionospheric artifact and would be important technique to improve the accuracy and the availability for L-band or P-band systems.

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.83-94
• /
• 2017

In this study, we figured out that music modes and item types could affect people's urged decision making through a k-value which results from a delay discounting's hyperbolic function. Generally, high k-value is related to impulsive decision making. Concretely, there was a significant interaction between items and music. For the luxury item, the k-value was higher while listening to major music than minor. However, for the non-luxury item condition the k-value difference was not significant between two pieces of music. Moreover, we expected mood could be manipulated after listening to the music and mediate a difference of tendency. We used first movement as an allegro and second as an andante of Mozart piano concerto No.5 D-major and No.20 D-minor for stimuli. As a result, mode and tempo's main effects were not significant. Nevertheless, there was a significant two-way interaction. To put it concretely, the k-value of major condition was marginally higher than minor condition on allegro. However, the k-value of major condition was significantly lower than minor condition on andante. Also, depressed degree difference was significant but it was not significant as a mediator. Set depressed degree as a predict variable and future time span as a mediator, further research found future time perception partially mediated the effect that depressed degree affects impulsivity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.819-830
• /
• 2017

An FM radio based PCL system is a passive radar technique for detecting the multiple moving targets from FM radio signals and tracking the trajectories of the targets by calculating the cross-correlation function of direct-path signal and target echo signals. However, the interference signals are received from a surveillance channel, which is designed to receive the target echo signals. Because of this problem, the target echo signals are masked by the strong interference signals and this makes it difficult to detect the true targets from the cross-correlation function. Adaptive filters are known as effective methods for suppressing the interference signals but there is a problem to present their accurate performances in the PCL system because many literatures used the cross-correlation function and the ratio of input and output power as a measure of the performance analysis. In this paper, a performance analysis method is proposed to evaluate the performance of interference cancellation algorithms. By using the property that each component of the filter weight vector is adjusted to suppress the specific interference signal, a performance measure of the interference signal suppression is defined by a function of adaptive filter weights. Based on the proposed method, we compare the performance of the adaptive filters used in the PCL system. Simulation results show that the proposed method can be very effective for evaluating the performance of interference cancellation algorithms.

• Imaging Science in Dentistry
• /
• v.39 no.3
• /
• pp.163-168
• /
• 2009

Purpose : To assess the clinical findings and hard tissue changes of osteomyelitis of the jaws using computed tomographic (CT) image analysis. Materials and Methods : We reviewed and interpreted the CT images of 163 patients (64 males and 99 females, age range from 10 to 87 years) who visited the Seoul National University Dental Hospital from April 23, 2006 to December 31, 2008 and were diagnosed as osteomyelitis of the jaws through clinical, radiologic, and histopathologic examination. Each CT findings was investigated for frequency, correlation with age and gender. Results : Of the 163 patients, 31 (19.0%) were affected on the maxilla, 135 (82.8%) were affected on the mandible, and 3 (1.8%) were affected on the both jaws simultaneously. The mean age of the patients who were affected on the maxilla was 61.0 years and that of the patients who were affected on the mandible was 56.2 years. On the maxilla, the most frequent site of disease was the posterior area (83.9%) and on the mandible, mandibular body (83.0%), followed by angle (48.1%), ramus (38.5%), condyle (13.3%), incisal area (9.6%), and coronoid process (3.0%). Among the 31 maxillary osteomyelitis, defect in the trabecular bone was observed in 28 (90.3%), osteosclerosis 20 (64.5%), defect in the cortical bone 27 (87.1%), sequestrum 17 (54.8%), and periosteal reaction 2 (6.5%). Among the 135 mandibular osteomyelitis, defect in the trabecular bone was observed in 100 (74.1%), osteosclerosis 104 (77.0%), defect in the cortical bone 116 (85.9%), sequestrum 36 (26.7%), and periosteal reaction 67 (49.6%). Conclusion : Of our cases, the maxillary osteomyelitis was visibly observed more frequently in females than males. The incidence is the highest in seventies (28.8%) and the lowest in teens (3.1%). The osteomyelitis of the jaws was observed more frequently in males than females before the age of 50, and observed more frequently in females after the age of 50. The most noticeable point was that the sequestrum was observed more often on maxillary osteomyelitis and the periosteal reaction was observed more often on mandibular osteomyelitis.