• Journal of the Korean Ceramic Society
• /
• v.44 no.2 s.297
• /
• pp.116-123
• /
• 2007

Electrical properties of AlN ceramics sintered with 1 wt% $Y_2O_3$ have been investigated. From the impedance spectroscopy, electrical conductivity of grain boundary was found to be much lower than that of grain. DC conductivity measurement showed the electrode polarization effects caused by blocking electrode. The heat-treatment at $1700^{\circ}C$ of the specimen sintered at $1850^{\circ}C$ transformed continuous pain boundary phases along triple boundary junctions into isolated particles in grain comers. The heat-treatment induced decreases both in grain and grain boundary conductivity, and in DC electrical conductivities. From the analysis on the transference number, ionic conductivity was shown to be more dominant than electron conductivity, which was due to ion compensation mechanism during oxygen incorporation into grain.

• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.737-744
• /
• 2008

Purpose: In advanced case of periodontitis, surgical treatment without bone contouring may result in residual pockets inaccessible to proper cleaning during post-treatment maintenance. This problem can be avoided or reduced by applying guided tissue regeneration. Materials and Methods: All of 3 patients had deep periodontal pocket depth and bleeding on probing, and radiograph revealed osseous defect, so we planned guided tissue regeneration using resorbable membrane with or without xenograft. Result: 6 months later, periodontal pocket depth and bleeding on probing was improved and gingiva was stable. Conclusion: Guided tissue regeneration using resorbable membrane with or without xenograft in osseous defect is predictable.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.3
• /
• pp.7-14
• /
• 2005

There are lots of XML security researches as growing importance of XML. Apvrille and Girier proposed a XML signature schema with a time stamping protocol(TSP) to support timeliness. However, the security of the timeliness in their schema depends on only a trusted security authority(TSA). To solve this problem, they suggested a solution by the distributed and linked model, but their solution has a big overhead. This paper proposes a new XML signature schema to solve the overhead problem. The proposed signature schema can offer the timeliness by the XML signature schema with user's timestmap and it solve the TSA's security problem.

• Journal of Chest Surgery
• /
• v.35 no.8
• /
• pp.638-641
• /
• 2002

Low grade fibromyxoid sarcoma is a recently recognized, uncommon soft tissue neoplasm. It has a tendency to develop in deep soft tissue of young adults and a possibility of local recurrence or distant metastasis. Diagnostic criteria have not been well defined and this tumor has not been accepted as a distinct entity. Histologically, it is characterized by the presence of bland spindle cells with mainly whorled pattern of growth, set in alternating areas with a myxoid or fibrous stroma. Careful consideration of the morphological and immunohistochemical features of this tumor permit a positive diagnosis of low grade fibromyxoid sarcoma and allow its distinction from a number of other benign and malignant soft tissue neoplasms. We experienced a low grade fibromyxoid sarcoma in chest wall and report this case with a review of the literature.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.1-8
• /
• 1998

The a-C:H films have been grown on the glass substrate by PECVD mathod, where plasma was generated with a 60Hz line power source. The carbonization is checked from peak intensities of D($sp^3$) and G($sp^2$) peaks in Raman spectra. The hydronization and C-H bonding status in films can also be determined from FTIR results. Both the bonding strength of C-H and the ratio of $sp^3$ to $sp^2$ in bonding are found to be slightly dependent of partial pressure of $C_2H_2$. Judging from above results, we can conclude that the best value for partial pressure of $C_2H_2$ in growing process of thick films is about 15%.

• Journal of radiological science and technology
• /
• v.14 no.1
• /
• pp.49-60
• /
• 1991

Thermoluminescent phosphors, which are now being used widely in radiation dosimetry, have an excellent sensitivity to ionizing radiation. In this study, thermoluminescent phosphors of $CaSO_4$ : Mn, $CaSO_4$ : Dy and $CaSO_4$ : Tm are prepared and their physical properties are investigated by measuring the trapping parameters and their luminescent spectra. By considering the sensitivity to X-ray and fading characteristics, $CaSO_4$ : Dy is most adequate to imaging plate. The imaging plate are prepared by coating the $CaSO_4$ : Dy powder on the Al substrate and its dose dependence is linear within the range of 40 mGy-20 Gy X-ray. The sensitivity of imaging plate depends linearly on the thickness of coated phosphor layer up to $35\;mg/cm^2$ and is independent on the grain size of the phosphor in the range of $70{\sim}250\;{\mu}m$. By photographing the imaging plate, X-ray images of the test object are obtained and better than those of X-ray films.

• Journal of Broadcast Engineering
• /
• v.23 no.3
• /
• pp.431-436
• /
• 2018

In this paper, a simple but effective algorithm to reduce the computational complexity of thumbnail generation and to improve image quality without aliasing artifacts is proposed. For the high speed decoding, the proposed algorithm performs partial decoding per $4{\times}4$ boundary in TU(Transform Unit), and preforms TU boundary in PU(Prediction Unit). The proposed method defines the weights based on intra prediction directions and estimates the thumbnail pixel by using that weights. this method remains thumbnail extraction time and improves thumbnail image quality compared with conventional algorithms.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.105-111
• /
• 1999

This paper presents experimental results on the electrical properties of hydrogenated amorphous carbon films(a-C:H) prepared by PECVD. DC conductance of a-C:H was measured as a function of temperatures in the range of 100 to 423K. We studied two a-C:H films: one was well explained by the Mott's Variable Range Hopping(VRH) rule, but the other sample did not follow it. However, the conduction data of second sample were well fitted to Shimakawa's Multi-Phonon Hopping(MPH) model according to which conductivity is proportional to $T^M$ with m=15-17. but, in our samples, m was 10-12. Also a-C:H showed several bias effects like relaxation of conductance, bias-dependent conductance and the change of conductance slope in 1n(${\sigma}{\sqrt{T}}$) vs. $T^{1/4}$ plot. In this study we interpret these data by bias-dependent detrapping model.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.91-97
• /
• 2003

The behaviors of diamond deposition using microwave plasma chemical vapor deposition method have been studied by varying the concentration of methane in the methane - hydrogen gas mixture. The carbonization is checked from peak intensities of D($sp^3$) and G($sp^2$) peaks in Raman spectra. The hydronization and C-H bonding status in films can also be determined from FTIR results. Both the bonding strength of C-H and the ratio of $sp^3$ to $sp^2$ in bonding are found to be slightly dependent of partial pressure of $CH_4$ Judging from above results, we can conclude that the best value for partial pressure of $CH_4$ in growing process of thick films is about 13.8%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.317-320
• /
• 2011

Hydrogen peroxide turbopump was designed for bi-propellant liquid rocket engine using hydrogen peroxide and kerosene as propellants. Turbopump operation was verified through water tests. Design conditions of hydrogen peroxide turbopump were determined, and impeller was designed. Turbine which drives pump was selected from commercial turbocharger. Gas generator was designed by reference from turbine map. Pump, turbine, gas generator were integrated, and turbopump system was constructed. Turbopump supplied water by 1.47 bar of pressure and as well as 3.4 kg/s of mass flow rate.