• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.599-608
• /
• 2012

A numerical analysis has been performed through implicit dynamic finite element analysis using the commercial package, ABAQUS in order to investigate effect of laser peening on welding residual stress mitigation of dissimilar metal welds in a safety injection nozzle of integral reactor. The implicit dynamic finite element analysis are compared with the previous experimental results. By comparison, it is identified that the implicit dynamic finite element analysis is valid for residual stress mitigation via laser peening. Implicit static finite element residual stress analysis has been performed for the dissimilar metal welds subject to inner repair welding. The analysis results represent that both axial and hoop residual stresses are tensile on inner surface of safety injection nozzle due to inner repair welding. Also Parametric study has performed to investigate effect of laser peening variables such as maximum impact pressure, duration time of pressure, spot diameter and peening direction on the welding residual stress mitigation. As a result, it is found that laser peening has the preventive maintenance effect to mitigate mainly residual stresses of region near inner surface.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.271-287
• /
• 2013

In this study, more convenient model(S-model) for predicting ground surface settlement is developed through comparing field monitoring data of the domestic subway applied shield TBM method with conventional equation & numerical analysis. Sample stations are chosen from whole of excavation section and lateral & vertical ground surface settlement characteristic with excavation are analysed. Based on analysis result, through the comparison with actual monitoring data, the model that is possible to compute maximum surface settlement and settlement influence area is suggested with assumption that lateral surface settlement forms are composed relaxed zone and elastic zone. In addition, vertical ground surface settlement patterns with excavation are similar to cubic-function and S-model with assumption that coefficients are function of tunnel diameter and depth is suggested. Consequently, the ground surface settlement patterns are significantly similar to actual monitoring data and numerical method result. Thus, as a result, when tunnels are excavated using sheild TBM through rather soft weathered soil & rock layer, prediction of ground surface settlement with excavation using convenient S-model is practicable.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.1
• /
• pp.29-41
• /
• 2021

Although underground works are essential to use underground spaces in urban areas efficiently, various damages caused by constructions have often occurred, making them major social problems. Since 2018, it is stipulated in the Special Act on Underground Safety Management that appropriate construction methods must be used in the design stage to prevent various damage cases. This Special Act includes establishing an area subject to underground safety impact assessment, analysis of ground and geological status, review of effects caused by changes in groundwater, review of ground safety, and establishment of measures to secure underground safety. This study area consists of various strata in order of landfill, sedimentary silt, sedimentary sand, sedimentary gravel, weathering zone, and foundation rock. Also, the slurry wall, a highly rigid underground continuous wall, was chosen as a construction method to consider high water table distribution and minimize the influence of the surroundings in this area. However, ground subsidence occurred on the road nearby in December 2019 due to the inflow of loosening soil to the construction area. Thus, several types of site investigations were conducted to suggest an appropriate analysis method and to find out loosed ground behavior and its area for the subsided site. As a result, new design soil properties were re-calculated, and the reinforcement measures were proposed through analytical verification.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.26-36
• /
• 2002

Mach-Zehnder type traveling-wave optical modulators with 3-section and 5-section phase reversal were designed and fabricated on z-cut $LiNbO_3$ substrates. Optical waveguides were designed by means of the FDM(Finite Difference Method). Design of CPW traveling-wave electrodes were performed by the SOR(Successive Over Relaxation) in the active region and by the CMM(Conformal Mapping) in the input/output section. The optical response R(${\omega}$ calculated based on the measured S-parameters showed the bandwidth of 15GHz centered at 25GHz for the 3-section, and the bandwidth of 22GHz at 45GHz for the 5-section.

• Korean Journal of Social Welfare
• /
• v.65 no.3
• /
• pp.265-289
• /
• 2013

The purpose of this study is to analyse the reality and dynamics of transition of work-family reconciliation policy and gender regime in Germany to focus on recent introduction of parents benefit by applying meta path analysis. There is made of 'layering' in work-family reconciliation policy area. Because political barrier has alleviated they can introduce parents benefit, but cannot help stick to child care benefit because of internal barrier. But because parents benefit has activated by 'differential growth', German gender regime has suffered core transition of complementation that dominant structure has changed from 'sequential reconciliation' to 'concomitant reconciliation'. On the other hand, by 'purposeful decoupling' of gender area, core activists have attempted to cut the possibility of weakening of coordination relationship on main institutional areas of German model.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.3
• /
• pp.1-8
• /
• 1972

The characteristics of tunnel diode pair circuit biased within the negative resistance region has also the voltage-control type negative resistance region, and the voltage at the center point of negative resistance region is described as the square-wave relaxation oscillation. In this paper, the period T, positive duration T1, negative duration T2 of the pulse are obatined from the characteristic curve T, positive duration T1, negative duration T2 of the pulse are obtained from the characteristic curve and observed actually, considring the fact that the pulse width and the period of square-wave at the center point of the negative resistance region is able to be controlle dby the blas volgate. Mereover, the relationship between T, T1 or T2 and circuit parameters is searched for and the Circuit parameters that satisfy the conditions of T1-T2 being proportional to the variation of bias voltage with Teonstant are determined. Thereafter, the bias voltage and the signal voltage are inserted serially to the PWM circuit and the characteristics of that circuit is analyzed.

• Journal of the Korean School Mathematics Society
• /
• v.17 no.4
• /
• pp.589-611
• /
• 2014

Since most people experience mathematics anxiety(MA), the research on mathematics anxiety has been the main theme in the research of mathematics education. The study of brain science related to MA has recently been begun due to the advent of apparatuses so this study might have revisited MA as time passed and aimed to obtain realistic implications for the future study. For this purpose, we analyzed previous studies how to measure MA and how to develop the intervention to reduce MA. As the result, the researchers based on brain science studied the relevance of specific parts of the brain according to the degree of MA using only simple computational tasks. The research for developing the MA scale has upgraded how to measure both the cognitive and affective domains with more efficient ways. The research on intervention for MA has developed the programs using systematic desensitization, clinical counseling, STAD teaching method, writing methods, etc. However, we realized that more specified and reliable studies to solve the MA must be done in the future.

• Archives of design research
• /
• v.15 no.1
• /
• pp.257-266
• /
• 2002

Modern Society is tuning to the wide organized social structure with highly varieties. To the cultural aspects in these days of the late-indusoial society, due to the post-modernism. This kind of trend was found in overall fields of studies. Therefore, the post-modernism is to be a kind of a modern spirit ruling over the late 20th century. Post-modernism is a vague expression, that was begun to appear in various artistic intellectual, ideologic trends with a repulsion of modern design after the World War II. The present age as a modern society slews a distinguished mark of undifferentiation disorganization and relaxation, disassembling of social structure. With the study on the background of occurrence, character and philosophy for the post-modernism, the theoretical background of post-modernism could be seen. According to the influence of post-modernism, the minimalism, retro-design, kitsch-design, deconstructionism-design deconstructionism-design, new materia1-design and cyber-design shown on each trend of modern industrial design were studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2340-2349
• /
• 2009

In this paper we proposed a hopping routing scheme to resolve the hot spot problem for periodic monitoring services in wireless sensor networks. Our hopping routing scheme constructs load balanced routing path, where an amount of energy consumption of all nodes in the sensor networks is predictable. Load balanced routing paths can be obtained from horizontal hopping transmission scheme which balances the load of the sensor nodes in the same area, and also from vertical hopping transmission scheme which balances the load of the sensor nodes in the other area. The direct transmission count numbers as load balancing parameter for vertical hopping transmission are derived using the energy consumption model of the sensor nodes. The experimental results show that the proposed hopping scheme resolves the hot spot problem effectively. The efficiency of hopping routing scheme is also shown by comparison with other routing scheme such as multi-hop, direct transmission and clustering.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2393-2399
• /
• 2011

In the case where the bottom of railroad is penetrated by non-excavation construction method, the design is performed based on the assumption that there is no displacement and no change of stress However, measurement data showed that reduction of earth pressure and relaxation of stress take place by the displacement. In this study, we investigated the earth pressure on the structure under the railroad constructed by a non-excavation method and the stress relaxation region. The design based on earth pressure is non-economical because it is an over design. Relaxation of stress may lead to road base settlement and rail irregularly due to the reduced railroad supporting stiffness, to ballast crack in the case of concrete roadbed. The result showed that it is reasonable to set the stress on the structures as active earth pressure not as earth pressure at rest. Additionally, the study on the stress relaxation region identified the regions that should be supported in future construction by a non-excavation method.