• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1660-1665
• /
• 2015

Oats (Avena sativa L.) were evaluated in recent years as a promising crop for increasing the nutritional quality of foods, due to their abundance in many bioactive compounds. The objectives of this study were to determine antioxidant compounds and antioxidant activities of nine oat cultivars and investigate the relationships between antioxidant compounds and antioxidant activities in oat cultivars. The contents of total polyphenolics and vitamin E in oat cultivars were analyzed by spectrophotometric methods and normal phase HPLC, respectively. 2,2'-Azino-bis-(3-ethylbenzothiazoline- 6-sulphonic acid) (ABTS) radical and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities, reducing power, and chelating effects were used to compare the relative antioxidant activities of oat cultivars. In this study, total polyphenolic and vitamin E contents of oat cultivars ranged from 83.41 to 130.59 mg gallic acid equivalents/100 g and 0.54 to 1.90 mg/100 g, respectively. High levels of ABTS radical (116.14 mg Trolox equivalent antioxidant capacity (TEAC)/100 g) and DPPH radical (38.58 mg TEAC/100 g) scavenging activities and reducing power ($A_{700}=0.922$) were found in Daeyang. Significant correlation was evaluated between total polyphenolic contents and their antioxidant activities, namely ABTS and DPPH radical scavenging activities and reducing power. A low correlation was observed between vitamin E contents and their antioxidant activities. The results of this study could have an impact on oat consumption by enhancing consumer awareness of the health benefits of oats.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.115-120
• /
• 2016

$CeO_2$ is used as a co-catalyst with $TiO_2$ to improve the catalytic activity of $MnO_x$ and characterization of nano-sized powder is identified with de-NOx efficiency. A comparison between $MnO_x-CeO_2/TiO_2$ and single $CeO_2$ was conducted in terms of microstructural analysis to observe the behavior of $CeO_2$ in the ternary catalyst. The $MnO_x-CeO_2/TiO_2$ catalyst was synthesized by sol-gel method and the average particle size of the single $CeO_2$ is about $285{\mu}m$ due to the low thermal stability, whereas the particle size $MnO_x-CeO_2/TiO_2$ is about 130 nm. The strong interaction between Ce and Ti was identified through the EDS mapping by transmission electron microscopy (TEM). The improvement about 20 % of $de-NO_x$ efficiency is observed in the low-temperature ($150^{\circ}C{\sim}250^{\circ}C$) and vigorous oxygen exchange by well-dispersed $CeO_2$ is the reason of catalytic activity improvement.

• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.193-198
• /
• 2014

The quality and antioxidative characteristics of drinks prepared with different mixing ratios of black garlic and Oenanthe javanica DC., BD-1 (black garlic only), BD-2 (black garlic:Oenanthe javanica DC.=2:1), BD-3 (black garlic:Oenanthe javanica DC.=1:1), and BD-4 (black garlic:Oenanthe javanica DC.=1:2), were studied. The pH increased with the increasing concentration of Oenanthe javanica DC. extract in all the tested drinks, but the sugar contents decreased. The total polyphenol contents of the drinks were 28.48 ${\mu}g/mL$ (BD-1), 41.91 ${\mu}g/mL$ (BD-2), 42.36 ${\mu}g/mL$ (BD-3), and 46.96 ${\mu}g/mL$ (BD-4). The SOD-like activity was highest for BD-4 (18.60%), followed by BD-3 (15.53%), BD-2 (12.53%), and BD-1 (10.27%). The thiobarbituric acid reactive substances (TBARS) was highest for BD-4 (52.51%), followed by BD-3 (45.70%), BD-2 (39.44%), and BD-1 (28.72%). The ferrous ion chelating activity increased with the increasing concentration of Oenanthe javanica DC extract, and BD-4 showed the best activities among all the tested drinks. The water-soluble vitamin content (vitamins B1, B2, B6, and C) of BD-4 (1197.77 ${\mu}g/mL$) was higher than those of the other drinks (BD-1, 213.02 ${\mu}g/mL$; BD-2, 477.87 ${\mu}g/mL$; BD-3, 914.72 ${\mu}g/mL$), and the vitamin C (806.21 ${\mu}g/mL$) content of the water-soluble vitamins at BD-4 was higher than those of vitamins B1 (68.04 ${\mu}g/mL$), B2 (312.51 ${\mu}g/mL$), and B6 (11.01 ${\mu}g/mL$). BD-4 showed the best score in the sensory evaluations, such as in the evaluation of the color, flavor, taste, and overall acceptability.

• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.276-285
• /
• 2014

The purpose of this study was to develop a new fermented product (named as Cheonggeumjang) using Sigumjang, Cheonggukjang and Oak mushroom. This study was conducted to evaluate the effects of Sigumjang, Cheonggukjang, and Cheonggeumjang, which were mixed in a different ratio as A (Sigumjang: Cheonggukjang = 1:2), B (Sigumjang: Cheonggukjang = 1:1) and C (Sigumjang: Cheonggukjang = 2 : 1). Then, the functions and physicochemical properties of products were investigated. We found that the crude protein content in Cheonggeumjang was higher than in Sigumjang whereas fat and calories content was less than that of Cheonggukjang. Free sugar content in Cheonggeumjang C 5.8681 g/100g was the highest. Moroever, Cheonggeumjang C and Sigumjang has an antioxidant activities. The electron donating capacity, SOD like activity and the inhibitory effect on xanthine oxidase of these two were significantly high than other group. Fat rancidity is promoted in the presence of metal ion, Cheonggeumjang group has higher inhibitory effect on $Fe^{2+}$ion than on $Cu^{2+}$ ion. The rancidity of fat is also increased by reactive oxygens species, Cheonggeumjang group inhibited $H_2O_2$ in higher extent than $KO_2$. Also, ${\alpha}$-glucosidase inhibition activity of Cheonggeumjang C in all of the concentrations (300 ppm, 500 ppm and 700 ppm) is higher than other groups. In sensory evaluation, Cheonggeumjang C groups is ranked significantly higher than the other groups while considering color, flavor, taste and the overall acceptability. Taken together, the results of this study suggest that Cheonggeumjang is best ingredient for increasing the consumer acceptability and functionality.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.44-50
• /
• 2001

Metal oxide semiconductor (MOS) structures containing nanocrystals are fabricated by using rapid thermal oxidations of amorphous silicon films. The amorphous films are deposited either by electron beam deposition method or by electron beam deposition assisted by Ar ion beam during deposition. Post oxidation of e-beam deposited film results in relatively small hysteresis of capacitance-voltage (C-V) and the flat band voltage shift, $\DeltaV_{FB}$ is less than 1V indicative of the formation of low density nanocrystals in $SiO_2$ near $SiO_2$/Si interface. By contrast, we observe very large hysteresis in C-V characteristics for oxidized ion-beam assisted e-beam deposited sample. The flat band voltage shift is larger than 22V and the hysteresis becomes even broader as increasing injection times of holes at accumulation condition and electrons at inversion condition. The result indicates the formation of slow traps in $SiO_2$ near $SiO_2$/Si interface which might be related to large density nanocrystals. Roughly estimated trap density is $1{\times}10^{13}cm^{-2}$. Such a large hysteresis may be explained in terms of the activation of adatom migration by Ar ion during deposition. The activated migration may increase nucleation rate of Si nuclei in amorphous Si matrix. During post oxidation process, nuclei grow into nanocrystals. Therefore, ion beam assistance during deposition may be very feasible for MOS structure containing nanocrystals with large density which is a basic building block for single electron memory device.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.95-102
• /
• 2015

In this paper, the effects of sodium hydroxide (NaOH) and aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) dosage on strength properties were investigated. For evaluating the property related to the dosage of alkali activator, sodium hydroxide (NaOH) of 4% (N1 series) and 8% (N2 series) was added to 1~5% (K1~K5) dosage of aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$) and 1% (C1) and 2% (C2) dosage of calcium oxide (CaO). W/B ratio was 0.5 and binder/ fine aggregate ratio was 0.5, respectively. Test result clearly showed that the compressive strength development of alkali-activated slag cement (AASC) mortars were significantly dependent on the dosage of NaOH and $AlK(SO_4)_2{\cdot}12H_2O$. The result of XRD analysis indicated that the main hydration product of $NaOH+AlK (SO_4)_2{\cdot}12H_2O$ activated slag was ettringite and CSH. But at early ages, ettringite and sulfate coated the surface of unhydrated slag grains and inhibited the hydration reaction of slag in high dosage of $NaOH+AlK(SO_4)_2{\cdot}12H_2O$. The $SO_4{^{-2}}$ ions from $AlK(SO_4)_2{\cdot}12H_2O$ reacts with CaO in blast furnace slag or added CaO to form gypsum ($CaSO_4{\cdot}2H_2O$), which reacts with CaO and $Al_2O_3$ to from ettringite in $NaOH+AlK(SO_4)_2{\cdot}12H_2O$ activated slag cement system. Therefore, blast furnace slag can be activated by $NaOH+AlK(SO_4)_2{\cdot}12H_2O$.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1998

For the purpose of finding new cathode materials for medium-temperature $(700\~800^{\circ}C)$ solid oxide fuel cells, $Gd_{0.8}Ca_{0.2}Co_{1-x}Fe_xO_3,\;(x=0.0\~0.5)$ are prepared, and their thermal stability and conductivity characteristics are investigated. Also, the cathodic activities are measured after the cathode layer being attached on CGO (cerium-gadolinium oxide) electrolyte disk. The X-ray analyses indicate that the materials prepared by calcining the citrate-gels at $800^{\circ}C$ have the orthorhombic perovskite structure without discernible impurities. The thermal stability of the undoped Co perovskite is so poor that it is decomposed to the individual binary oxide even at $1300^{\circ}C$. But the partially Fe-doped cobaltates exhibit a better thermal stability to retain their structural integrity up to $1400^{\circ}C$. The observation whereby both the undoped and Fe-doped cobaltates melt at ca. $1300^{\circ}C$ leads us to perform the electrode adhesion at <$1300^{\circ}C$. The cathodic activity of $Gd_{0.8}Ca_{0.2}Co_{1-x}Fe_xO_3,\;(x=0.0\~0.5)$, electrodes is superior to $La_{0.9}Sr_{0.1}MnO_3$, among the samples of $x=0.0\~0.5$, the x=0.2 cathode shows the best activity for the oxygen reduction reaction. It is likely that the Fe-doping provides a better thermal stability to the materials but in turn imparts an inferior cathodic activity, such that the optimum trade-off is made at x=0.2 between the two factors. The total electrical conductivity and ion conductivity of $Gd_{0.8}Ca_{0.2}Co_{1-x}Fe_xO_3$, are measured to be 51 S/cm and $6.0\times10^{-4}S/cm\;at\;800^{\circ}C$, respectively. The conductivity values illustrate that the materials are a mixed conductor and the reaction sites can be expanded to the overall electrode surface, thereby providing a better cathodic activity than $La_{0.9}Sr_{0.1}MnO_3$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of the Korean Home Economics Association
• /
• v.39 no.1
• /
• pp.91-102
• /
• 2001

The non-starch polysaccharides in the cell wall of rice, glutinous rice, and black rice, were analyzed. They were fractionated into fractions; water-soluble, hot writer-soluble, ammonium oxalate-soluble, sodium hydroxide-soluble, potassium hydroxide-soluble, and the alkali-insoluble, according to the solvent solubility. The dietary fiber contents were 5.4% in glutinous rice, 4.2% in rice and 7.5% in black rice. The sodium hydroxide soluble fibers were abundant in each kind of rice, especially 4.01% in black rice. The water soluble fibers were 80% of dietary fiber in glutinous rice, 66% in rice, 86% in black rice. It was supposed that the content of the water soluble fibers in rice was increased by pounding. Pectic substances in water soluble fibers, hot water soluble fibers, and ammonium oxalate soluble fibers fraction, were 2.4% in glutinous rice fraction,1.59% in rice, and 1.12% in black rice. Alkali soluble fibers were considered as hemicellulose. Black rice contained 5.80% of hemicellulose, which was more than twice as much as glutinous rice(2.58%) and rice(2.22%). Alkali insoluble fibers were considered as cellulose, which showed no considerable difference. Among samples content of uronic acid in glutinous rice, rice and black rice were 0.9%, 0.66%, 1.8% respectively. Uronic acid of black rice was twice more than other samples tested. The fraction of black rice that uronic acid was extracted at most was the fraction of sodium hydroxide. Mono saccharides of the fraction was the glucose, the arabinose, the xylose.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.153-164
• /
• 1999

The solubilization of BTEX was evaluated in aqueous surfactant solutions with and without several additives. Anionic surfactant(Sodium Dodecyl Sulfate, SDS) and nonionic surfactants (NEODOL(equation omitted)25-3 and $SOFTANOL\circledR-90$ were used as test surfactants. The effects of surfactant HLB(Hydrophile-Lipophile Balance) Number and hydrocarbon molar volume and polarity of BTEX on the MSR(Molar Solubilization Ratio), micelle-water partition coefficient of BTEX, and CMC(C,itical Micelle Concentration) were investigated. Optimizing treatment conditions applicable to enhanced solubilization was also studied by manupulating salinity or electrolyte control with additives of ethyl alcohol, hydrotrope, and electrolyte solution. The most effective surfactant for solubilization was found $SOFTANOL\circledR-90$, since HLB number of 13.6 is similar to those values of BTEX ranging between 11.4 and 12.2, which was also proved experimentally. Ethyl alchohol of 3% was the most effective additives in reducing CMC and improving solubilization among the conditions using SDS, NEODOL(equation omitted)25-3, and $SOFTANOL\circledR-90$ with three additives. The partitioning of BTEX between surfactant micelles and aqueous solutions was characterized by a mole fraction micelle-phase/aqueous phase partion coefficient, $K_m$. Values of log $K_m$. for BTEX compounds in surfactant solutions of this study range from 2.95 to 3.76(100mM SDS) and 2.95 to 3.49(117mM $SOFTANOL\circledR-90$. Log $K_m$ appears to be a linear function of log $K_{ow}$ for SDS and $SOFTANOL\circledR-90$. A knowledge of partitioning of BTEX in aqueous surfactant system can be a prerequisite for the understanding of the behavior of hydrophobic organic compounds in soil-water systems in which surfactants play a role in remediation of contaminated soil and facilitated transport.