• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.187-191
• /
• 2019

Perovskite-type oxides have consistently attracted considerable attention for their applications in high-temperature electrochemical devices, such as electrolytes and electrodes of solid oxide fuel cells, oxygen permeating membranes and sensors etc. Among them, the electrical conductivity of 10 % Sr and 10 % Mg doped $LaAlO_3$ (LSAM9191) was measured using impedance spectroscopy and 4-probe d.c. method. Below $550^{\circ}C$, the grain boundary resistance mostly determined the overall conductivity; however, it nearly disappeared above $800^{\circ}C$. Using the defect model and curve fitting, the ionic and electronic conductivity contributions were also separated. In the temperature region where the sample resistance is mostly determined by the grain volume property, LSAM9191 was an oxygen ion conductor at low $Po_2$ and a mixed conductor at high $Po_2$. With increasing temperature, the ionic conduction region only slightly increased. Thus, LSAM9191 is a promising material as an oxygen ion conductor at high temperature and in low $Po_2$.

• Electrical & Electronic Materials
• /
• v.1 no.4
• /
• pp.333-341
• /
• 1988

포리에틸렌, 테레프탈레트를 금속감화물로 오염시켜 열자극특성을 중심으로 가동이온의 중성화, 재이온화 및 이동의 과정등에서 이온의 거동에 관하여 검토하였다. PET가 오염이 되면 이온이 증가되고 전극금속의 영향이 있으며 고온에서 서브리니어 특성을 가지며 가동이온의 증성화 현상이 있는 것을 밝혔다. 가동이돈의 주기적 운동에 기인한 직류전기전도모델로 실험한 결과가 정성적으로 정상전류 전압 특성과 일치함이 입증되었다.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.2
• /
• pp.89-93
• /
• 2004

Sulfonated polysulfone (SPSF) with poly(phenylmethyl silsesquioxane, PPSQ) composite polymer electrolyte membranes were prepared and their proton conductivity, water uptake and methanol permeability of membranes were characterized. By controlling the ratio of $(CH_3)_3SCI\;and\;CISO_3H$ and reaction time, SPSF with $37\~75\%$ degree of sulfonation were synthesized. The increase of sulfonate groups in the base polymer resulted in the increase of the water uptake in the membranes as well as methanol permeability. Composite membranes were prepared by casting of DMF solution of SPSF and PPSQ. The proton conductivity of the composite membrane at room temperature was $2.8\times10^{-3}\~4.9\times10^{-2}S/cm.$ The increase of PPSQ contents in composite membranes resulted in a decrease in water uptake and methanol permeability. Composite membranes containing $5\%$ PPSQ did not make a significant effect on the proton conductivity nO methanol permeability compared with that of pristine SPSF, but a significant decrease of water uptake was observed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.152-159
• /
• 2017

In marine environment, the durability of concrete and reinforcing steel is known to be deteriorate by the permeation of chloride ion into concrete. In this study the conductive photocatalyst was used to improve the seawater corrosion resistance of the concrete and steel. Mortar and concrete samples were prepared by mixing with various amounts of conductive active carbon and photocatalytic powder($TiO_2$). The compressive strength of concrete was decreased with the increase of the amount of conductive carbon powders. The samples containing conductive carbon and photocatalytic powders showed the superior seawater corrosion resistance compared with the ordinary sample, which was verified by XRF analysis showing the concentration of chloride ion($Cl^-$) of mortars and concretes. The inhibitive effect of photocatalyst against chloride attack was discussed with the diffusion coefficient of chloride ion into mortar and concrete.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.455-459
• /
• 2004

Ionic conductivities of poly(ethylene oxide) (PEO)-based electrolytes are in a considerable inconsistency in many papers, varying more than three orders of magnitude for just same compositions. In PEO-salt-ceramic composite electrolytes, it has been also reported that the conductivity can be variant by almost three orders of magnitude according to thermal treatment and it has been regarded as a consequence of polymer-ceramic particle interaction. In this paper, we present a more systematic study on the change of ionic conductivity for ceramic-free PEO$_{10}$LiClO$_4$ polymer electrolytes, and found that the ionic conductivity can be variant more than hundred times according to thermal history. The slow recrystallization kinetics of PEO polymer is discussed to be responsible for the thermal history effect. Present results reveal that the effect of ceramic filler is not a main cause of the conductivity relaxation phenomenon.n.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.192.1-192.1
• /
• 2016

타이타늄은 밸브 메탈의 일종으로, 다양한 전해질 조건에서 양극산화되어 이산화 타이타늄($TiO_2$)을 형성한다. 이산화 타이타늄은 저렴한 가격, 풍부함, 무독성, 높은 안정성 등 다양한 장점을 지닌다. 또한 리튬 이온의 삽입/탈리 이후에도 구조적인 변화가 적은 성질과 비교적 높은 방전 전압(1.0-2.5 V vs Li/Li+)으로 인해 그래파이트를 대체할 리튬이온 전지의 전극재료로써 연구되어 왔다. 하지만 낮은 이온 및 전기 전도도로 인해 다양한 분야에서의 활용에 한계가 있어왔다. 이러한 한계 극복을 위해, 이산화 타이타늄에 전도성이 높은 탄소 계열의 물질을 코팅하는 방법이 고려되었다. 그래핀 산화물은 강한 산을 이용하여 그래파이트를 산화시킨 물질로, 많은 산소작용기를 함유하고 있어 탄소 고유의 전기전도성을 갖지 못한다. 환원 그래핀 산화물(reduced graphene oxide)는 빛, 열, 화학 작용울 통해 그래핀 옥사이드를 환원시켜 산소작용기를 없앤 물질로, 환원과정에서 전기전도성을 회복한다. 이에 본 연구에서는 이산화 타이타늄에 환원 그래핀 산화물(reduced graphene oxide)를 코팅하여 전기 전도도를 향상시키고. 이에 대한 활용 분야를 연구하고자 하였다.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.4
• /
• pp.81-89
• /
• 2020

To understand the performance of the electrochemical device, the analysis of the mechanism of ionic conduction is important. However, due to the ionic interaction in the electrolyte and the complexity of the electrolyte structure, a clear analysis method of the ion conduction mechanism has not been proposed. Instead, a variety of mathematical models have been devised to explain the mechanism of ion conduction, and this review introduces the Arrhenius and Vogel-Tammann-Fulcher (VTF) model. In general, the above two mathematical models are used to describe the temperature dependence of the transport properties of electrolytes such as ionic conductivity, diffusion coefficient, and viscosity, and a suitable model can be determined through the linearity of the graph consisting of the logarithm of the moving property and the reciprocal of the temperature. Currently, many electrolyte studies are evaluating the suitability of the above two models for electrolytes by varying the composition and temperature range, and the ion conduction mechanism analysis and activation energy calculation are in progress. However, since there are no models that can accurately describe the transport properties of electrolytes, new models and improvement of existing models are needed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.200-200
• /
• 1999

^g , pp V (Poly-para phenylene vinylene) 유도체와^g , pp P(Poly-para phennylene) 유도체에 Ar, H2, N2 및 O2 등의 이온을 조사하여 PL(Photoluminescence)의 변화를 실험하였다. 각각의 전도성 고분자는 ITO9indium tin oxide)가 증착되어 있는 유리기판위에 spin coating을 하였으며 이렇게 처리된 전도성 고분자의 표면에 이온을 조사하였다. 여기에서 조사된 이온의 가속 에너지는 300eV에서 700eV까지 변화시켰고 이온 조사량은 1$\times$1013ions/cm2에서 1$\times$1017ions/cm2까지 변화시켰다. 이때 이온빔의 전류밀도는 0.2$\mu\textrm{A}$/$\textrm{cm}^2$이하로 고정하였으며 chamber내의 진공도는 $1.5\times$10-4Torr를 유지하였다. 이온 빔처리후 불안정한 고분자의 표면이 대기와 반응하는 것을 어느정도 방지하기 위해 이온 빔으로 처리된 시료를 chamber의 내부에 일정시간동안 방치하였다. Ar, H등의 이온으로 처리된 MEH-PPV의 경우는 PL의 세기가 감소하였고 이온 조사량이 1016ions/cm2 보다 클 때 PL의 세기는 급속히 감소하였다.^g , pp V와^g , pp P 유도체의 경우는 특정 이온 조사량에서 PL의 증가현상을 보였는데^g , pp P 도체중에서 P3의 경우를 보면 이온 빔 에너지가 300eV이고 이온 전류 밀도가 0.05$\mu\textrm{A}$/$\textrm{cm}^2$인 N2이온을 조사하면 이온 조사량이 1$\times$1013ions/cm2가 될 때 PL의 세기가 39%까지 증가하였다. PL의 변화에 대한 비교를 위해 이온빔으로 처리된 시료와 처리되지 않은 시료의 UV흡수스펙트럼과 IR 흡수 스펙트럼을 분석하였다. 본 실험에 사용된 모든 시료의 PL 세기는 1016ons/cm2이상의 dose에서 급격한 감소 현상을 나타내었고 PL의 최대값을 나타내는 파장의 이동은 관찰되지 않았다.

• Ceramist
• /
• v.4 no.5
• /
• pp.16-28
• /
• 2001

• Electrical & Electronic Materials
• /
• v.8 no.4
• /
• pp.487-494
• /
• 1995

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li secondary battery. We investigated the effects of lithium salts, plasticizer addition, temperature dependence of conductivity and electrochemical stability window of polyethylene oxide(PEO) electrolytes. PEO electrolyte completed with LiCIO$\_$4/ shows the better conductivity than the others. PEO-LiCIO$\_$4/ electrolyte, when EO/Li$\^$+/ ratio is 8, showed adequate conductivity around room temperature. By adding propylene carbonate and ethylene carbonate to PEO-LiCIO$\_$4/ electrolyte, its conductivity was higher than that of PEO-LiCIO$\_$4/ without those. Also PEO$\_$8/LiCIO$\_$4/ electrolyte remains stable up to 4.5V vs. Li/Li.