• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.149-153
• /
• 2001

This paper presents an end-point control of 1-link flexible arm tip-mass by using fuzzy position control algorithm. The arm is mounted on a translational mechanism driven by a ballscrew, whose rotation is controlled by a DC servomotor. Tip position is controlled so that it follows a desired position. Feedback signal is composed of both tip displacement error and change of error. This paper gives tip responses according to the variations of tip-mass and beam length, and the effects of reducing the residual vibrations occurring at the end-point. In the case of the residual vibrations of tip displacement, fuzzy control has better results than the PD-control.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.452-457
• /
• 1999

Several bacterial strains utilizing crude oil as their sole carbon and energy sources were isolated from marine. One of the strains named KCL-1 showed the highest degradative activity for crude oil and the best growth rate. This strain was identified as a Klebsiella sp. based on the morphological, biochemical, and physiological characteristics. The optimum cultural conditions were as follows; $32^{\circ}C$~$37^{\circ}C$ for temperature and 7.0 for initial pH. Additionally, the optimal concentration of sodium chloride was 3.0%, indicating that this strain was derived from seawater. KCL-1 could use several kinds of n-alkane hydrocarbons from octadecane to hexacosane as a sole carbon source. The degradation of crude oil by KCL-1 was stimulated by addition of octadecane in the culture. The emulsifying activity by KCL-1 was highest after 3 days of cultivation under the condition of 3.0% sodium chloride, pH 7.0 and $37^{\circ}C$.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1036-1041
• /
• 1993

The tip of the flexible robot arm has to be controlled by the active control reducing vibration because it has residual vibration after getting to desired position. This paper presents an end-point position control of a 1-link flexible robot arm having tip mass by the PID control algorithm. The system is composed of a flexible arm with tip mass, dc servomotor and ballscrew mechanism under translational motion. The feedback signal composed of the tip displacement measured by laser sensor, estimated velocity and acceleration is used to control the base motion. Theoretical results are obtained by applying the Laplace transform and the numerical inversion method to the governing equations. After the flexible robot arm reaches to. the desired position, the residual vibration is controlled by the PID algorithm. This paper gives the simulation and experimental results of end-point responses according to changing tip-mass and arm length. And this algorithm shows good effects of reducing the residual vibration. Approximately, theoretical response is in good agreement with experimental one.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.257-260
• /
• 1997

Bluetooth is the most promising network paradigm which ca open the new area in the information technology. Especially, bluetooth can link all the electrical products and PCs(Personal Computer) to cellular phone or PDA. In this paper, the data from ECU which are gathered by scanner are communicated between tow PCs using the bluethooth modules. The acquired data are ECU's self diagnosis signal and sensor output signal. Self diagnosis signals are very important to check the ECU's state and sensor output signals. Using these data, the possibility of wireless communication with ECU is developed and verified. Protocol stack of bluetooth is L2CAP through HCI and wireless communication software of ECU's signal is developed using VC++ in Windows 98 environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.94-101
• /
• 2004

This paper presents the development of a keypad test system for the improvement of working environment and productivity using PTC 16F877 microprocessor. In order to detect the fault of keypad products, hardware and software design is performed in this system. Keypad fault detection system is controlled by the 8 bit one chip PIC microcontroller for the exactness and speed. Developed panel of the keypad test system is comprised of the sub-panel for selecting in the inspected keypad types and the main panel f3r displaying the working order and fault position. Furthermore, all data from keypad inspection are stored in main memory of personal computer for the database. All these functions lead to the improvement of working speed and environment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.153-156
• /
• 2000

This paper presents an PID type fuzzy based method for nohnear engine idle controller The output is a duty cycle(DC) for driving a idle speed cont개l valve(1SCV). For precise control of SI engine, the CPS sensor and coolant temperature are used. Visual C* language is used to make simulation panel for the fast and precise idle speed control. The dSPACE board and supported Control desk program is used in experiment ta the same purpose as simulation. The experimental results have a good agreement with simulation ones.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.273-276
• /
• 1997

Seeing is an intelligent act. Retina is the most important part among the components of eye which is comprised of iris, pupil, lens, optic disk, and so forth. Because retina acts like a photo receiver to detect light from every object, if damaged, animals have a severe problem to live along with themselves and sometimes they lose their sight. In the ophthalmology, doctors use special instrument to see exact retina image of object and operate the surgery by rotating focus control knob. In this study, a basic test is done to achieve the auto focus control instrument. Specially made sledge and attenuator are installed on the optic bed to change the distance and laser power between the first reflective mirror and the second one. Control panel which is compiled by Visual C t t to control stepping motors ,laser power and photodiode are implemented with ADA-board.

• The Korean Journal of Food And Nutrition
• /
• v.6 no.1
• /
• pp.31-36
• /
• 1993

Strawberry pulp was separated into serum and insoluble pulp by centrifugation and the serum was concentrated in vacuo to five folds at 55~58$^{\circ}C$ and 30~60mmHg. Concentrated strawberry pulp was prepared by mixing of concentrated serum and insoluble pulp. To evaluate the quality changes of straw-berry pulp, color, physicochemical and sensory properties were analyzed after concentration and during 18 weeks storage at -18'2. The results obtained from the study were as follows : during 18 weeks storage at - l8$^{\circ}C$, soluble solid, browning, reducing sugar content were increased and total anthocyanin, vitamin C, apparent viscosity were decreased. The result of sensory evaluation indicated that texture of concentrated pulp was inferior to that of control but flavor, color intensity and overall acceptance were not different from each other.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.122-124
• /
• 2007

Master and slave of teleoperation control system through internet or long distance cable must keep stable. If one part becomes unstable or time delay happens in network, the all system can become unstable. Usually stability of teleoperation control system can distinguish by passivity. In this paper, we implemented bilateral teleopcration control system that load passivity controller to keep stability of system. Composed by manipulator that trillion this sricks and horizontal manufacturing that have force reflecting function are available and embodied so that control through wireless LAN may be available. And distinguished stability through an experiment and manufacturing performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.307-308
• /
• 2006

This paper is about the development of automatic inspection system of welded nuts on Support hinge using machine vision for the improvement of working condition. Until now, projection welding process was performed by operator. Also, inspection of welded nuts is performed manually and recorded by the operator's naked eye. So these processes caused the produce of poorly-made articles. To improve this manual operation, inspection system using machine vision is introduced. Test algorithm, lighting system and program showed good results to the designed inspection system and led to the increment of productivity.