• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.76-89
• /
• 2018

The distribution of the combined heat and power system is active as a solution to the instability of energy supply and environmental pollution caused by continuous industrial development. In Korea, the safety standards for combined heat and power system using a gas engine are insufficient therefore the study on this is needed. In this study, the safety performance and structural/material assessment items of domestic and international standards applied to the combined heat and power system were analyzed to carry out a standardization study on safety performance applicable to 20 kW gas engine combined heat and power system. In addition, the safety performance assessment (plan) of the gas engine combined heat and power system was derived by performing risk analysis and risk assessment using HAZOP. Assessment items include engine ignition systems related to safety performance, piping tight performance, watering and temperature rise performance, combustion performance, electrical efficiency, thermal efficiency, overall efficiency and humidity performance. Gas and water pipes, gas control and shut-off valves, durability, heat resistance, and cold resistance of metal or non-metallic materials related to the structure and materials of the gas engine combined heat and power systems.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.111-118
• /
• 2022

Recently, as underground facilities buried under roads in Korea are aging, the amount of underground facility maintenance work is rapidly increasing. For the maintenance and management of such underground facilities, the cutting work of the road pavement should be preceded. However, the conventional road pavement cutters used in Korea are not eco-friendly, and the reality is that they generate a lot of noise and cutting sludge (scattering dust). Therefore, in this study, the concept of the cutting sludge recovery device was derived, and an eco-friendly pavement cutter including this function was designed and manufactured. The developed equipment took about 20 to 30 seconds to cut 1m to a depth of 100 to 150mm. Also, the sludge suction performance was good in most sections, and the noise level of the equipment briefly measured at a distance of 2m was 82.7dB on average. However, due to the limitation that the developed equipment was at the level of the first prototype, the driving stability was somewhat low, and equipment abnormalities such as engine shutdown and sludge recovery performance decreased in some cases. The cutting performance and sludge recovery function will be more stable through tuning and improvement of the developed prototype in the future. In addition, we plan to quantitatively compare and analyze productivity by applying the improved prototype to actual field conditions.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• Journal of Animal Science and Technology
• /
• v.48 no.1
• /
• pp.39-48
• /
• 2006

This study utilized test day of somatic cell score data of dairy cattle from 2000 to 2004. The number of data used were 124,635 of first parity, 134,308 of second parity, 77,862 of third parity, 41,787 of forth parity and 37,412 of fifth parity. The data was analyzed by least square mean method using GLM to estimate the effects of calving year, age, lactation stage, parity and season on somatic cell score. Variance component estimation using test day model was determined by using expectation maximization algorithm- restricted maximum likelihood (EM-REML) analysis method. In each parity, somatic cell score was low for younger group and was relatively high in older groups. Likewise, for lactation stage, the score was low in early-lactation and high in late-lactation in first parity and second parity. Nevertheless, for the third, fourth and fifth parity, however, high somatic cell score was observed in mid-lactation. Generally, the score was high in the peak. Although in fourth and fifth parity, the score was low in late-lactation. Environmental effect of season, somatic cell score was generally low from September to November for all parities. The score was high between June and August when the milk production is usually low. The heritability in each parity were 0.05, 0.09, 0.10, 0.05 and 0.05 for parity 1, 2, 3, 4, 5, respectively. Genetic variance value was estimated to be high in second, third and fifth parity in early-lactation and to be low in first and forth parity.

• Journal of Animal Science and Technology
• /
• v.52 no.2
• /
• pp.83-90
• /
• 2010

Hanwoo proven bulls have been selected since 1987 and consequently contributed to farmers for the improvement of beef cattle in Korea. The demand for the quality beef production as well as higher production efficiency was erupted after early 2000 as relatively cheap imported beef released. Therefore the pressure on the reformation of selection index for Hanwoo proven bulls have been piled up to furnish with Hanwoo's competitive. A total of 734 progeny test data were analyzed to select traits and their weights in the selection index to meet the beef market requirement. Regression analysis with stepwise selection method was used to select proper trait and its weight for selection index. A series of computer simulation was carried out to compare the currently using selection index with the alternate two selection indices proposed in this study. New selection index using standardized breeding values of Loin eye Muscle Area (LMA), Backfat Thickness (BFT) and Marbling Score (MS) with weight ratio 1:-1:6 was proposed. Results showed higher performance in improving MS and BFT gain by 22% and 31% still holding 86%~89% of genetic gain achieved by current index in Carcass Weight (CW) and LMA when new selection index was fitted. Because, new index has little consideration for production cost, further research should be performed to build selection index including cost and income simultaneously.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.8
• /
• pp.717-724
• /
• 2013

Urea-SCR technology is known as one of the powerful NOx reduction systems for vehicles as well as stationary applications. For its consistent and reliable operation in vehicle applications, however, the freezing and melting of the urea solution in cold environments have to be resolved. In this study, therefore, a numerical study of three-dimensional unsteady problems was analyzed to understand the urea freezing and heating phenomena and heat transfer characteristics in terms of urea liquid volume fraction, temperature profiles, and phase change behavior in urea solutions with time by using the commercial software Fluent 6.3. As a result, it was found that the freezing phenomenon proceeds with a phase change from the tank wall to the center, whereas the melting phenomenon occurs faster in the upper part of the storage tank by natural convection and in the adjacent part of the coolant pipe than in other parts. Furthermore, approximately 190 s were required to obtain 1L of urea solution using a 4-coiled coolant heater under conditions of $70^{\circ}C$ and 200 L/h.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.3
• /
• pp.1-12
• /
• 2015

During installing sheet piles for an impermeable wall or a retaining wall, vibratory hammers are widely used. Among vibratory hammers, a hydraulic hammer is used most commonly. However, a hydraulic hammer causes excessive vibration and noise due to resonance by change of natural frequency according to movements of eccentric shaft when the hammer starts and stops. In this study, new variable amplitude type hammer is developed in order to reduce the vibration and noise due to resonance produced in starting and stopping the hammer. By controlling horizontal angle in two pairs of eccentric body inside of the hammer, the amplitude and vibration of the new hammer can be controlled. The performance tests with the new hammer and existing hammers such as the hydraulic hammer and electric hammer are carried out, and the new hammer shows reduced vibration and noise results in comparison with existing hammers from performance tests. Also, this study shows that penetration rates of sheet pile using the new hammer increase due to impellent force of a backhoe in comparison with the electric hammer and penetration rate increase in comparison with a general hydraulic hammer, since the new hammer can control the amplitude during penetration of sheet pile according to soil condition.

• Journal of Animal Science and Technology
• /
• v.50 no.1
• /
• pp.1-8
• /
• 2008

This study was conducted to develop a traceability system for systematic animal identifi- cation to increase efficiency of animal production, post production and processing to ensure that quality and sanitary meat products reach the consumers of the entire country. The new animal identification traceability system was designed for easy management, data collection and storage considering bar code, registration number and farm number.Specifically the system aimed 1) To provide standard radio frequency technology identification (RF-ID) for livestock management, standard of ear tag, microchip and ear tag identification equipment, 2) To guarantee meat product label thereby safeguarding the consumers 3) To give incentives to farmers for producing quality meat products and 4) To provide unified system for national livestock management.Results of the research which started in July 2003 which was used by several farmers’ cooperatives and Department Store revealed the feasibility of using the RF-ID system although much will be done to conform to global nomenclatures.

• Journal of Animal Science and Technology
• /
• v.44 no.4
• /
• pp.383-390
• /
• 2002

The data were consisted of 1,262 records for carcass traits observed at Hanwoo steers from 1998 to 2001 at Namwon and Deakwanryung branch of National Livestock Research Institute, Rural Development Administration. Pedigrees of young bulls were traced back to search for magnifying inbreeding. Genetic parameters for carcass traits with Gibbs sampling in a threshold animal model were compared to estimates with REML algorithm in linear model. As the results, most of bulls were not inbred and sire pedigree group was non-inbred population. However, most of the bulls fell in some relationship with each other. Heritability estimates as fully posterior means by Gibbs samplers in threshold model were higher than those by REML in linear model. Furthermore, these estimates in threshold model using GS showed higher estimates than estimates using tested young bulls in previous study and same model. Heritability estimate by GS for marbling score was 0.74 and genetic correlation estimate between marbling score and body weight at slaughter was –0.44. Further study for correlation of breeding values between REML algorithm in linear model and Gibbs sampling algorithm in threshold model was needed.

• Journal of Animal Science and Technology
• /
• v.54 no.5
• /
• pp.337-340
• /
• 2012

The genetic connectedness between herds is an essential requirement to make robust across-herd estimation of the breeding values of the animals. In this study, genetic connectedness between herds was evaluated by a connectedness rating method. A total of 24,971 records of days to 90 kg (D90KG) of the pigs on performance testing programs collected from six herds (labeled from 'A' to 'F') of Duroc breed along with pedigree information comprising 456,697 families were used. Results showed that a total of eight boars were used for semen exchange programs among participant farms. Herds 'A' through 'E' were found strongly connected among them. But 'F' herd was genetically connected strongly only with 'A' herd. The highest average connectedness rating was 91.7% between 'A' herd and 'C' herd. The lowest average connectedness rating was 65.1% between 'D' and 'F'. The concept of a single genetic group comprising six Duroc herds studied is meaningful due to high connectedness rates among them. Therefore, with this high genetic ties between participant Duroc farms, the more accurate genetic evaluation would be possible.