• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.3
• /
• pp.474-483
• /
• 2015

The textural properties of breads containing midified starches such as pregelatinized waxy corn starch, acetylated potato starch and hydroxypropylated tapioca starch, were investigated to determine the optimum addition level of modified starches. Effects of modified starches on dough properties were investigated through a farinogram and amylogram based on the different additional levels of modified starches (3%, 6%, 9%, 12% and 15% of flour content). Moisture contents and firmness values were measured to investigate the degree of retrogradation at 0 h, 36 h and 72 h after production. The levels of moisture contents were highest upon addition of pregelatinized waxy corn starch followed by acetylated potato starch and lowest upon addition of hydroxypropylated tapioca starch. Overall, higher moisture contents resulted in lower firmness levels. The preference scores by type of modified starch were highest upon addition of 9% hydroxypropylated tapioca starch, 3% pregelatinized waxy corn starch, and 6% acetylated potato starch, respectively. Preference scores were significantly correlated with textural properties such as volume, absorption, stability and weakness (p<0.01).

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.632-643
• /
• 2002

The purpose of this study was two-fold. First was to evaluate whether the molecular sieving model was appropriate for ionic dissociation experiment. Second was to compare the dissociation of calcium and hydroxyl ions from five types of calcium hydroxide pastes (Pure calcium hydroxide paste, DT temporary $dressing^{\circledR},{\;}Metapaste^{\circledR},{\;}Chidopex^{\circledR},{\;}Metapex^{\circledR}$) in three vehicles (aqueous, viscous and oily) and the antibacterial effect. Each calcium hydroxide pastes was placed into 0.65ml tube with cap and then 15% polyacrylamide gel was placed onto calcium hydroxide pastes. After the gel was hardened, the tubes were filled with tridistilled water (pH 7.14) and closed with cap. The tubes were stored in $37^{\circ}C$ 100% incubator The pH reading and the concentration of calcium ions were taken at 1, 4, 7. 10, and 14 days. The brain heart infusion agar plates with S. mutans and A. actinomycetemcomitans were used far antibacterial activity test. Middle of agar plate was filled with the calcium hydroxide pastes. The plates were incubated at $37^{\circ}C$ and observations were made to detect the zones of inhibition. These data were evaluated statistically by use of the analysis of variance and duncan test. The results were as follows. 1. In fresh mixing state, the pH of five types of calcium hydroxide pastes were measured between 12.5 and 12.8. 2. The pH was increased in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (11.45) and DT temporary $dressing^{\circledR}$ (11.33) showed highest pH, followed by $Metapaste^{\circledR}$ (9.49), $Chidopex^{\circledR}$ (8.37) and $Metapex^{\circledR}$ (7.59) 3. Calcium was higher in all five types of calcium hydroxide pastes compared with control group. In 14 days, Pure calcium hydroxide paste (137.29 mg%) and DT temporary $dressing^{\circledR}$ (124.6 mg%) showed highest value, followed by $Metapaste^{\circledR}$ (116.74 mg%), $Chidopex^{\circledR}$ (111.84 mg%) and $Metapex^{\circledR}$ (60.22 mg%). 4. The zones of bacterial inhibition were seen around all five types of calcium hydroxide pastes. $Chidopex^{\circledR}{\;}and{\;}Metapex^{\circledR}$ groups which include iodoform were observed significantly larger zone of inhibition in A. actinomycetemcomitans compared with the other calcium hydroxide groups (p<0.05) However, $Metapex^{\circledR}$ showed the least antibacterial effect on S. mutans compared with other groups (p<0.05). The molecular sieving model was found to be acceptable in dissociation experiment of hydroxyl and calcium ions when compared with the previous tooth model study. But this model was not appropriate for the antibacterial test.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.91-101
• /
• 1988

The purpose of this study was to evaluate Ultrasonic devices in root canal enlargement, about the effects on the canal shape and on the cutting ability beyond the curvature in curved canals. 180 resin blocks with $40^{\circ}$ curvature in apical third and 16mm long canal were made of epoxy resin and smooth broaches. These blocks were devided into six groups. According to the devices (ENAC$^{(R)}$, HARMOSONIC$^{(R)}$, Sonic Air MM 3000$^{(R)}$) and files (Zipperer file, H-file, Flexofile, K-file, Sharper file), five groups were instrumented one minute with # 15 files, then the enlarged size was measured. And # 20 files were used again in the same groups, then the enlarged size was measured. In control group, the time which was taken to enlarge the canal from # 15 to # 20 by hand technique was measured. The data was analyzed statistically. Then the enlarged shapes were evaluated in six groups with the stereomicroscope and recorded in ideal and non-ideal canal shape to compare the effects of ultrasonic devices on the canal shape. Only the ideal shaped canals were used in the study whether the cutting ability beyond the curvature in curved canals was, or not. The files with whole flutes, no flutes, and flutes in apical 5mm only were used. The weight differences of pre-and post-instrumentation by Sonic Air MM 3000$^{(R)}$ for two minutes were compared. The results were as follow: 1. Intracanal instrumentation for 1 minute with ultrasonic devices using # 15 and # 20 file in curved root canal of the epoxy resin block can not reach to the next file size. 2. Sonic Air MM 3000$^{(R)}$ shows higher cutting ability than the other two devices (p=0.001), however the percentage of non-ideal canal shape was the highest. 3. Two ultrasonic devices except Sonic Air MM 3000 considered normal in ideal canal shaping ability. 4. little cutting ability was shown beyond the curvature of curved canals.

• The Korean Journal of Malacology
• /
• v.26 no.4
• /
• pp.291-296
• /
• 2010

Samples of Turbo (Batillus) cornutus Lightfoot, 1786 in Jeju Island were collected from September 2009 to May 2010. Population ecological parameters and stock assessment of the turban shell were determined, based on the length and age composition data from 2000 to 2009 and ecological parameters. Instantaneous coefficient of total mortality (Z) of turban shell was estimated to be 2.2062/year. The estimated instantaneous coefficient of natural mortality (M) was 0.874/year. The age of turban shell at its first capture ($t_c$) was 2.636 year. Yield-per-recruit were estimated under harvest strategies that based on $F_{max}$, $F_{0.1}$, $F_{35%}$, and $F_{40%}$ was 10.44 g, 1.87 g, 6.53 g and 7.46 g.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.595-602
• /
• 1998

Among the apex locators, the frequency dependent type is more accurate and convenient to use than others, But the accuracy of the apex locator is still influenced by the presence of various electrolytes used in root canal treatments. In this study, we have developed a frequency dependent electronic apex locator minimizing the influence of the electrolytes on the measurement of root canal lengths. It was also confirmed that two frequencies of 500Hz and 100kHz are optimal for the measuring impedance compare with commercial product used(400Hz and 8kHz)a and there were no differences in accuracy among the three different types of the waveforms; sinusoidal, triangular, and rectangular waves(p>0.05). Impedance ratio of the two different frequencies represents the position of the file in root canal, and the voltage difference of two signals represents the status of the fluid in the root canal. As a result of compensation using the voltage differences, the errors were decreased on the average from +0.54mm to +0.18mm in $H_2O_2$ solution (p<0.01), and from -0.33mm to -0.01mm in NaOCl solution(p<0.01). The accuracies based on ${\pm}$0.5mm, in $H_2O_2$ and NaOCl solutions were improved with the automatic compensation from 71.1% and 91.1% to 82.2% and 100% respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2567-2574
• /
• 2011

The purpose of this study was to investigate the effects of Korean traditional dance on acculturative stress and life satisfaction in the married immigrant women. The subjects of this quasi-experimental study were two folds as one experimental group and one control group. The subjects of experimental group were randomly composed of Korean traditional Dance. Contrary to this, the subjects of control group included those who neither participated in Korean traditional dance. All statistical analyses and description methods were computed by SPSS window 14.0. The discriminant analysis was used to find changes of the acculturative stress and life satisfaction, ANCOVA. The results of this study were as followings: Frist, there was founded that Korean traditional dance program group significantly decreased their acculturative stress. Second, there was founded that Korean traditional dance program group significantly improved their life satisfaction. It is concluded that Korean traditional dance program is directly and strongly cause and effect relations with the acculturative stress and life satisfaction in the married immigrant women.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.709-716
• /
• 2015

In this study, structural developments of polypropylene / ionomer / clay ternary composites were investigated depending on the dispersion and localization of clay. The changes in physical properties were observed adding organoclays 1~10wt% to 90% polypropylene and 10% ionomer blends. The organoclays were localized inside of the dispersed phase under the composition of 3wt%, however, over that composition, clay particles formed stiff network structure in the dispersed phase and additional clays were localized at the interface between two phases. According to the developments of microstructure, the interaction of ternary composites changed from polypropylene-ionomer to polypropylene-ionomer and ionomer-clay which affected rheological properties. The storage modulus (G') of the composites was similar to the blends when clays were localized inside of dispersed phase but increased when clays were localized at interface. Also, the fractured morphology of the composites showed phase boundary and growing radius of dispersed phase depending on addition of fillers when clays were found inside. However, when fillers found at the interface between blends, the radius of the dispersed phase decreased and compatibilized morphology were observed. The interfacial interaction of the ternary composite was quantified depending on the structural development of dispersed phase and localization of clay particles by the rheological properties. The interaction of composites at solid state which was measured through peel adhesion strength increased by growth of interfacial interaction of each component. Furthermore, the crystallinity of the composites was decreased when the clay particles were localized at the interface.

• Tuberculosis and Respiratory Diseases
• /
• v.70 no.6
• /
• pp.521-525
• /
• 2011

Bronchial carcinoid tumors are relatively uncommon neoplasms that are considered to be malignant tumors of low to intermediate grade. They are classified by pathologic features as typical or atypical carcinoids and have distinctly different prognoses and therapeutic options. Surgery is the treatment of choice in typical and atypical carcinoid tumors but the approach has been changing. Recently, several studies have described experiences using other technologies as adjuncts to bronchoscopic resection, technologies such as laser and cryotherapy with curative intent in endoluminal typical carcinoids. Here we present a case of atypical bronchial carcinoid that was treated with bronchoscopic cryotherapy.

• Korean Journal of Ichthyology
• /
• v.12 no.1
• /
• pp.71-84
• /
• 2000

Annual reproductive cycle of the file fish, Thamnaconus modestus (Gunther), was histologically investigated. Samples were collected monthly in the coastal waters of Chungmun, south of Cheju Island, Korea from July 1997 to June 1999. In males and females of T. modestus GSI values reached the maximum in June and May, respectively. Reproductive cycle could be divided into the following successive stages: in females, growing stage (March to April), mature stage (April to May), spawning stage (May to June), degenerative and resting stage (July to February), and in males, growing stage (January to March), mature stage (April to May), spent stage (May to June), degenerative and resting stage (July to December), respectively. To clarify the spawning cycle of female in T. modestus, some were examined, that is, the weekly changes of GSI, detail developmental stages in the ovary and the weekly changes of sex steroid hormones ($E_2$ and T) levels in plasma during the spawning period. Throughout histological observation of the ovary during the spawning period, T. modestus belonged to an asynchronous and multiple spawner. Changes of plasma $E_2$ and T levels were similar to the changes of GSI and ovary maturity.

• Korean Journal of Ichthyology
• /
• v.12 no.3
• /
• pp.208-214
• /
• 2000

The egg development and morphological changes of larvae of the file fish, Thamnaconus modestus(Gunther), was investigated by artificial insemination. The fertilized egg was spherical in shape, colorless and adhesive with 0.63~0.67mm in diameter and yolk had 20~30 oil globules of various size (0.04~0.16 mm in diameter). The hatching occured at 53 hours after fertilization in $21.0\sim23.0^{\circ}C$ of water temperature. Hatched larvae measured 2.07~2.20 mm in total length with 5~6+17~18=22~24 myotomes. The 3~4 days after hatching larvae grew to the total length 2.62~2.77 mm, opened mouth and anus. The 5 days after hatching, total length of the larvae was 2.74~3.04 mm, the first dorsal fin was formed at the behind of head. After hatching 12~13 days larvae attained 3.78~3.99 mm in total length. This period formed rudimental dorsal fin and anal fin. Twenty days after hatching, larvae grew to 6.04~6.17mm in total length, at which time the dorsal, anal and caudal fin rays reached 19~20, 18~19 and 9~10, respectively.