• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.35-43
• /
• 2016

Recently, the pipeline system for waste transportation has been increasingly constructed as new solution for the waste collection and disposal system by constantly increasing domestic waste which issued as social problem. The pipeline system is constructed through long distance, so proper long-term monitoring system is necessary which available to detect the damage location for the effective maintenance. In this paper, the experimental study is carried out to evaluate the applicability of optical strain gauge sensor based on FBG for the long-term monitoring system. Three test parameters such as pressure leaking, blockage and deformation are considered as typical damages for real-scale pipeline test specimen. In order to measure flexural and volumetric strain and temperature, three FBG sensors are installed at each monitoring sections. From the test results, this study suggested effective methods of sensor installation and arrangement. Also the sensor spacing for the design of monitoring system using FBG sensor is derived by the correlation of distances from deformation between sensor responses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2891-2898
• /
• 2015

The new developed long distance transport technology uses the effect of electro-magnetic energy. But it's difficult to estimate the new technology. We monitored the velocity profile and pressure drops in pipes and estimated the technology quantitatively from data analysis. Laboratory test and field test gave us that the effects of electro-magnetic energy changed the flow properties and increased the velocity, especially at the slip layer. When transporting the dredged soil, electro-magnetic field generation reduces the frictional resistances at the slip layer, increases the velocity of flow. Furthermore, it would be possible to transport the dredged materials up to 15km long with one pump station.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1109-1116
• /
• 2014

The wheelchair mechanism for a car that is proposed in this study primarily consists of a transfer mechanism and storage mechanism. The wheelchair transfer mechanism consists of a manipulator installed in the roof of a car, and performs the function of transferring the wheelchair from the driver's seat to the trunk. The wheelchair storage mechanism consists of a lifting hoist installed in the trunk of car, and performs the function of storing the transferred wheelchair in the trunk and safely fastening it in place. This study analyzed and reviewed various manipulators, including a vertical type, Scara type, and telescopic type, with the goal of selecting the best type of manipulator for the wheelchair transfer mechanism. The telescopic type was selected and applied because of its good load support and storage capabilities. In addition, with regard to the wheelchair storage mechanism, a slide hoist type that used a slide rail and lift wire and a rotating link hoist type that used a rotating mechanism consisting of a worm gear and link were analyzed and reviewed. The slide hoist type was selected and applied because it had an advantage in relation to trunk space utilization. This study proposed a wheelchair transfer mechanism for a car to support a conventional wheelchair user's movements, and in order to conform to the structure of a domestic welfare car for the disabled.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.1 no.1
• /
• pp.66-71
• /
• 2009

Simulator is being utilized usefully in industrial education. Especially, it is the best method to use for the higher value-added business or hazardous system to train. Also, it is needed to effect in forward-looking industrial education changing from theoretical education to hands-on training. Therefore, the development of equipment that can be used in both theory and experience class and its application to education help you to maximize the training effect on LPG transportation method when you work in the field. As a result of its applying to the education, the understanding of transportation system of educational equipment came out 4.86 points of 5 points, the utilization on site had 4.47 points/5 points, and the satisfaction has 0.5 points/4.48 points. The LPG transporting system(simulator) is considered effective when it is utilized in the education.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.89-89
• /
• 2020

본 연구에서는 GPU 가속화 기반의 Boussinesq 모형인 Celeris Advecnt에 수심 적분된 2차원 이송-확산방정식을 추가하여 인터렉티브 시스템 기반의 추적자 이동 모형을 개발하였다. Celeris Advent는 최초로 개발된 인터렉티브 시스템을 갖춘 Boussinesq 모형으로, 시뮬레이션 중에 사용자가 모형의 파라미터뿐 아니라 모델 도메인 내 수위 및 수심을 바꿀 수 있다. 이를 통해 사용자는 모의가 진행되는 도중에 모델의 안정성 및 효율성을 위해 시간 간격을 조정할 수 있을 뿐 아니라 방파제 설치 등과 같은 지형 변화를 고려하기 위해 도메인 내 격자별 수심을 조정할 수 있다. 본 연구에서는 연안에서의 추적자 이동 모의를 위해 Boussinesq 방정식과 더불어 이송-확산방정식을 풀이하는 추적자 이동 모형을 개발하였다. 추적자의 확산항의 경우 분자 자체의 확산과 더불어 쇄파에 따른 난류 확산을 고려하였다. 난류 확산계수는 슈미트 수를 1로 두어 와동점성계수와 동일하게 두었으며, 와동점성은 단순화된 형태의 쇄파모형을 고려하여 계산하였다. 쇄파모형의 고려로 인해 이송-확산방정식과 더불어 운동량 방정식에서도 쇄파에 따른 운동량 소산이 고려되었다. 마지막으로, 추적자 농도에 대한 인터렉티브 시스템을 추가하여, 모델 구동 중에도 사용자가 수심적분된 추적자 농도를 조정할 수 있도록 하였다. 기수행된 2개의 수리실험 조건과 관측값을 이용하여 벤치마크 테스트를 수행하였으며, 관측값과 대체로 일치하는 것을 확인하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.351-354
• /
• 2006

In the present work, performance analysis of fuel feed and transfer system for Smart UAV was conducted. For the fuel feed system, it was verified that minimum and maximum pressure requirements at the fuel inlet of engine were satisfied. For the fuel transfer system, design variables of jet pump were derived and performance was verified for the maximum acceleration flight condition by using ESDU design guide and flowmaster code.

• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2020

This paper discusses a series of procedures and results for designing the gear part of a fuel transfer pump for an aircraft, developed as an independent technology for the first time in Korea. A gear pump type is selected because the design requirements of the fuel transfer pump are met by a gear pump with a characteristics of less leakage inside than a vane pump with superior overall performance. The gear housing is designed with suitable clearance, considering the outer diameter of the gear, which is the main factor on which the flow can be determined. Additionally, the calculation of the required hydraulic and axial force for the motor to drive the fuel transfer pump was performed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.263-270
• /
• 2014

A fluid transport technique is a key issue for the development of microfluidic systems. In this paper, a new concept for transporting a droplet without external power sources is proposed and verified numerically. The proposed device is a heterogeneous surface which has both hydrophilic and hydrophobic horizontal surfaces. The numerical simulation to demonstrate the new concept is conducted by an in-house solution code (PowerCFD) which employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method (CICSAM) in a volume of fluid (VOF) scheme for phase interface capturing. It is found that the proposed concept for droplet transport shows superior performance for droplet transport in microfluidic systems.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.839-846
• /
• 2022

Purpose: To secure the safety of firefighters who are dispatched to emergency activities for patients with suspected infectious diseases during an epidemic, and to identify the current status of suspected infectious disease patients by region based on the information collected at the site, and manage firefighting infectious diseases that can be controlled and supported I want to develop a system. Method: Develop a smartphone app that can classify suspected infectious disease patients to check whether an infectious disease is suspected, and develop a disposable NFC tag for patient identification to prevent infection from suspected infectious disease patients. Develop a management system that collects and analyzes data related to emergency patients with suspected infectious disease input from the field and provides them to relevant business personnel to evaluate whether the transport of emergency patients with suspected infectious disease is improved. Result: As a result of the experiment, it was possible to determine whether an infectious disease was suspected through the algorithm implemented in the smartphone app, and the retransfer rate was significantly reduced by transferring to an appropriate hospital. Conclusion: Through this study, the possibility of improving emergency medical services by applying ICT technology to emergency medical services was confirmed. It is expected that the safety of paramedics will be actively secured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.4
• /
• pp.280-284
• /
• 2002

This paper presents computer simulations of the stacking and transferring system for the fast freeform fabrication system. The stacking and transferring system is essential for the fast freeform fabrication system and its stable motion is very important for consistent stacking of the cut slices. The stacking and transferring system can be modeled as a pneumatic system. The system consists of air compressor, the control valve, and the cylinder. The governing parameters have been changed and the simulation results are shown to predict the time response of the system. The results show some parameters should be correctly tuned to obtain stable system response.