Proceedings of the Korea Water Resources Association Conference
/
2018.05a
/
pp.76-76
/
2018
하천에서의 유사이송과 하상변동을 분석하는 대표적인 방법으로는 현장에서 유사량이나 하상고를 측정하여 분석하는 실측에 의한 방법, 수리모형 실험과 수치모형을 이용하는 방법이 있다. 이 중에서 실측에 의한 방법은 시간과 비용의 한계로 수치해석모형을 이용한 연구가 많이 이루어 지고 있다. 현재까지 개발된 다양한 하상변동 수치모형들은 유사이송 상태를 평형 유사이송 상태를 가정하고 개발되어 왔다. 평형 유사이송은 흐름과 하상재료 등의 조건이 발생시킬 수 있는 유사이송능력과 실제 유사이송률이 동일하다고 가정하는 것이다. 그러나, 실제 유사이송에서는 흐름 및 지형 등의 변화에 따라서 지속적으로 새롭게 형성되는 유사이송능력에 실제 유사이송률이 빠르게 도달하지 못하면서 유사이송능력과 유사이송률 사이에 시 공간의 격차가 발생하게 된다. 이러한 상황을 비평형 유사이송이라고 하며 지속적인 하상 상승 및 저하가 발생하는 구간, 댐과 같은 구조물에 의해서 유사의 연속성이 차단되는 구간, 하상재료가 불연속한 구간 등에서 주로 발생하는 것으로 알려져 있다. 비평형 유사이송을 수학적으로 모의하기 위한 대표적인 방법에는 적응거리계수와 회복계수를 이용하는 방법이 있다. 위의 계수들은 흐름 및 하상 특성을 이용하여 공간에 대한 유사이송의 지체현상을 고려하는 방법으로 이를 산정하기 위한 다양한 공식들이 제시되고 있다. 그러나, 각 공식들에 의해서 제시되는 값에 많은 차이가 있는 것으로 알려져 있다. 본 연구에서는 실내실험과 수치실험을 통해서 평형/비평형 유사이송 및 집중형/분포형 적응거리계수를 고려한 모의 결과를 비교하였으며, 적응거리계수 산정공식에 따른 비평형 유사이송 모의 결과를 비교하였다. 본 연구에서 적용한 실내실험에 대해서는 평형 유사이송보다는 비평형 유사이송을 고려한 경우와 비평형 유사이송 공식을 이용하여 적응거리계수를 분포형 매개변수로 이용하는 경우가 실제 하상변동 모의 결과에 더 근접한 수치실험 결과를 제공하는 것으로 나타났다.
There are a lot of electrical and electronic components and pneumatic parts sensitive to vibration and shock in the VEB assembly which KARI directly transports among the KSLV-I upper stage transportation items. So, the special attention in the transportation is required. The transportation container with the apparatus for controlling environment was made in order to meet the requirements. The transportation tests using the engineering model were performed 4 times to verify the performance of the transportation container and to conform the transportation conditions(transportation velocity, route, etc.). In this document, the previous transportation history of the VEB assembly, the overview and the result of the KSLV-I FM unit 2 VEB assembly transportation are described.
Proceedings of the Korea Water Resources Association Conference
/
2022.05a
/
pp.177-177
/
2022
기후변화 및 해안 구조물의 증가 등 여러 원인이 연안침식 및 해안선 변화와 같은 연안의 지형변화를 가속하고 있다. 빠르게 변화하는 연안의 지형변화예측 및 대응책 강구를 위해서는 연안의 유사이송 현상에 대한 신속한 예측이 필요하다. 본 연구에서는 GPU 엔진 기반 파랑해석모형인 Celeris Advent를 활용하여 실시간으로 연안의 유사이송 모의가 가능한 수치모형을 개발하였다. Celeris Advent는 GPU의 병렬코어를 활용해 실시간 연산과 GUI를 통한 사용자와의 실시간 상호작용이 가능한 모형이다. 지배방정식은 확장형 Boussinesq 방정식에 유사이송방정식을 양방향 결합하여 구성하였고, 지배방정식에는 하이브리드 유한체적-유한차분 수치기법을 적용하여 이송항은 유한체적법(Kurganov & Petrova, 2007), 소스항은 유한차분법을 통해 이산화하여 해석한다. 유사이송방정식은 수심적분형 이송확산방정식에 침식 및 퇴적 플럭스를 반영하는 소스항을 결합하여, 이송항 및 확산항을 통해 유사의 이송/확산을 고려함과 동시에 소스항을 통해 하상과의 상호작용을 고려하였다.
This study presents prediction of maximum fly ash conveying capacity of fly ash system in a power plant. The mixture ratio and pressure drop characteristics of air-fly ash flow in piping system are not well understood due to the complexity of particle motion mechanism. In this paper, the researcher investigated the optimum mixture ratio when the pressure drop of fly ash conveying system is equal to maximum static pressure of displacement fly ash transport blower and the capacity of fly ash transport according to the optimum mixture ratio by experimenting the fly ash conveying system of domestic D coal thermal power plants, which is currently in operation. The experiment results showed that the maximum fly ash conveying capacity of fly ash system were founded under the condition of maximum air volume 5,040 m3/h, static pressure of trip condition 1,163 mmH2O. In addition, it was predicted maximum mixture ratio of the air-fly ash was 8.66 and maximum capacity of fly ash conveying was 52,600 kg/h under these conditions.
Proceedings of the Korean Society of Precision Engineering Conference
/
2004.05a
/
pp.160-160
/
2004
초음파 여기를 이용한 물체 이송 시스템은 최근 급속히 발달하고 있는 광산업이나 반도체 산업에서 기존의 이송 시스템의 단점을 보완하기 위해 개발되었다. 기존의 이송 시스템들은 이송공정이나 검사 공정 등에서 광소자의 표면손상이나 자기장에 의한 반도체 소자의 전자적 배열의 손상이 우려되었다. 하지만 PZT 액츄에이터로 구동되는 초음파 발생장치(Ultrasonic wave generator)에서 발생한 초음파 여기를 이용하여 물체를 이송시킬 경우 이러한 단점은 보완된다.(중략)
Proceedings of the Korean Society of Precision Engineering Conference
/
1991.04a
/
pp.59-67
/
1991
공작기계의 정밀도는 가공물의 최종 치수 정밀도와 직접적으로 연계되는 공작기계의 전체적 성능 평가를 위한 주요인자 중의 하나이다. 공작기계 위치 결정 정밀도에가장 큰 영항을 주는 인자로서는 이송계의강성, Back lash, 안내면의 습동저항 그리고 이송 계의 자세변화등이 해당된다. 본 연구에서는 이송나사로구동되는 CNC 원통 연삭기의 숫돌대(Wheel Head)축 이송 구동계의 오차발생 요인에 대해 실험적인 검토를 수행하였다. 이를 위하여 이송 구동계의 정강성에따른 영향과 이송 안내면의 각운동에 의한 위치정밀도 영향 및 위치 검출 장치의 종류에 따른 위치오차의 재현성(Repeatatility)의 유무를 레이 저 간섭계를 이용한 정밀 측정을 통하여 비교 검토함에 의해 이송 오차를 최소화 시킬 수 있는 CNC 공작기계이송 구동축 설계의 기본 방향을 마련하는데 역점을 두고 연구를 수행하게 되었다.
Proceedings of the Korean Society Of Semiconductor Equipment Technology
/
2004.05a
/
pp.72-84
/
2004
반도체 집적도가 높아지고 웨이퍼가 대구경화 됨에 따라 새로운 이송 장비의 개발이 필요하게 되었다. 본 연구에서는 이송장비의 새로운 개념인 공기부상 방식의 낱장이송 시스템을 설계하고 부상 노즐의 크기에 따른 부상 높이를 평가하였으며 그 결과 동일한 부상용 유량을 사용할 경우 0.5 mm 보다 0.8 mm 노즐이 부상 높이가 더 높고 에너지 절약적인 측면에서 유리함을 밝혔다. 또한 웨이퍼 이송용 추진 노즐의 배치에 따른 웨이퍼 이송 속도의 변화를 측정하여 동일 유량에서 추진속도가 훨씬 증가된 형상인 Type B(노즐 집중형)를 결정할 수 있었으며, 제조장비와 이송장비를 연결시켜주는 인터페이스에서의 웨이퍼 안정성을 평가한 결과 평균 16초 이내에 매우 안정된 공기부상 방식의 웨이퍼 낱장이송 시스템을 구현할 수 있었다.
Proceedings of the Korea Institute of Fire Science and Engineering Conference
/
2003.04a
/
pp.248-254
/
2003
According to the analysis of the patient transport in the fire disaster occuring at Taegu Subway Jungangro Station February 18th, 2003, authors concluded as follows. Patients were transported mainly to medical institutes which were larger and that had shorter distance. Because of non-emergenct patient's transport to larger and nearer institutes, some critical patients should be transported to more distant institutes. Dead patients before arrival were transported relatively evenly. An adequate transport according to adequate triage should be performed in the future. Early mitigation and response, correlation with the method of transport, regional guide line of disaster transport and correlation between disaster information and emergency medical information should be corrected and need research in the future.
Transactions of the Korean Society of Mechanical Engineers A
/
v.40
no.2
/
pp.213-220
/
2016
This research aims to develop core technologies for passive carrier (no power in carrier itself) transfer system. The technologies are passive levitation, propulsion, and guidance, which can be great benefits for semiconductor and display manufacturing industries. Passive maglev carrier is necessary to precise position control for quiet and stable transfer operation. However, the structural characteristics of carrier and the installation errors of gap sensors cause the pitch motion. Hence, the controller design in consideration of pitch motion is required. This study deals with the reduction control of carrier pitch motion. PDA controller and PDA controller with pitch control are proposed to compare the pitch angle analysis. The pitch angle and the levitation precision are measured by experiment. Finally, the optimized design of pitch controller is presented and the effects are discussed.
Proceedings of the Korean Institute of Navigation and Port Research Conference
/
2007.12a
/
pp.253-254
/
2007
오늘날 자동화 컨테이너 터미널은 대부분 AGV(Automated Guided Vehicle) 기반의 무인이송시스템을 운영하고 있다. AGV는 컨테이너의 상하차 작업 시 타장비의 도움을 필요로 한다. 이로 인하여 장비 간 대기시간이 발생하며, 이는 생산성을 떨어뜨리는 요인이 된다. 이와 같은 문제점을 해결한 무인이송장비로 ALV(Automated Lifting Vehicle)가 있다. ALV는 자가하역기능이 있어 타장비의 도움 없이 상하차 작업이 가능하다. 본 연구에서는 시뮬레이션을 통하여 각 이송시스템의 생산성을 비교하였다. 시뮬레이션은 이송시스템의 배차 방식과 안벽장비의 종류를 다양하게 설정하고, 무인이송장비의 가감속 운동 및 충돌을 고려하였다. 시뮬레이션 결과 소수의 경우를 제외하고는 ALV 기반의 이송시스템이 AGV 기반의 이송시스템보다 높은 생산성을 보여주었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.