• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.181-186
• /
• 2020

Until now, the development of design and operation model for automated container terminals has been mainly performed based on the western ports model, specializing in basic loading, and discharging operations. In the case of the Busan port, terminal operators provide basic stevedoring, as well as an additional logistics service known as 'On Dock Service' not suitable for the currently commercialized automated container terminal model. This study diagnosed the current Busan port's throughput structure and terminal operational characteristic, and proposed a modified perpendicular layout container terminal transport model named 'Interchange Transport Model' for effective management of empty container and operation costs. Although the 'Interchange Transport Model' requires an additional number of transport equipment (AGV), concerning operational efficiency and cost saving, a simulation showed 22% reduction of TAT and 9.4% reduction of annual terminal operational costs in comparison to the basic perpendicular layout model.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.332-341
• /
• 1998

Conventional polishing of stone panel edges has been done by hand. While this has changed somewhat with the advent of automatic machines, it is still very much a hand finishing technology. For the development of edge shape milling tool, the primary test on characteristics of edge shape milling tool was carried out. This paper presents the results of tests focused upon the milling capability that was varied by the variables of operation parameters. Author tried to confirm the effect of six operation parameters of equipment such as rotation speed, advance speed, applied load, water flow rate and rotational direction. The result from test was described in term of shape milling capability that was defined as cutting volume of rock by unit weight of tool wear. The variance of the results could indicate the optimum level of each operating parameters. The test was also carried out to determine the abrasion resistance varied according to the abrasive flow rate. The abrasion resistance was increased with the abrasive flow rate, but over some rate it was not changed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.2
• /
• pp.126-130
• /
• 2002

This paper presents the basic concept of new solid freeform fabrication system using rapid prototyping method. The system could fabricate an arbitrary ceramic form by laser cutting, transferring, stacking, and sintering of each slide. The system consists mainly of laser apparatus. X-Y table, a slide transferring system, and electric oven. The system could fabricate an object that has smooth surface with comparatively short period of time. The system is effective in terms of its direct fabrication capability without second mechanical process. The fabricated shape could directly be used as part of a whole assembly and therefore its method could be applied to various application areas.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.1165-1170
• /
• 2003

The objective of this study is to develop the simulation model of transport vehicle to analyze the required number of transport vehicle and to design the traffic pattern at automated container terminal. To model the transport vehicle, we defined the vehicle model and the traffic model using the state transition model of transport vehicle. An application of a simulation to simulate an automated container terminal with perpendicular layout is developed and described. From the results of simulation experiment, we obtained the vehicle speed and the number of vehicle under given productivity of container cranes, and analyzed the saving effect by cycle time.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.195-196
• /
• 2015

유해화학물질 이송관로의 실시간 유지관리를 위하여 파손사전 예방감시를 위한 이중구조 파이프 제작, GIS관망 구축을 위한 측량 및 시공 속성정보 수집을 위한 스마트 폰 앱 프로그램 개발, 실시간 감시를 위한 서버프로그램 개발을 수행하였다. 또한, 파일럿규모의 야외시험시설을 구축하여 시스템 동작여부를 확인하였다. 파손 예방은 파이프에 부착된 센서 케이블을 통하여 감지하도록 하였고, 누수는 압력센서를 일정한 간격으로 설치하여 시험하였다. VRS 측량장비와 스마트폰을 연계할 수 있는 앱 프로그램으로 실시간 자료 수집을 수행할 수 있도록 하였고, 감시 서버프로그램을 통하여 실시간 감시 및 알람이 가능하도록 하였다.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.109-116
• /
• 1998

Treatability tests of a soil washing device were performed for the remediation of eil-contaminated soil. The contaminant-containing soil with water was first fed into a oc-current screw conveyor and then into a counter-current washer. Surfactant was introduced into the washer and feeding soil was continuously separated on the basis of #40 mesh at the same time. A washing efficiency of 97.9% was achieved by the the soil washing device optimized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.167-169
• /
• 2021

There are only 14 public medical facilities available to residents regularly in the island area of Chungcheongnam-do, one health life support center, and one hospital ship, and these facilities and equipment cannot effectively respond to emergency patients such as severe trauma, cerebrovascular and cardiovascular diseases. The fastest means of transporting emergency patients is to use a doctor helicopter deployed at Dankook University Hospital (based in Cheonan). However, there is only one doctor helicopter deployed, and it cannot operate at night, and since it is in charge of all areas of Chungcheongnam-do, there is a limit to rapid transport in the event of a large number of patients. Therefore, we would like to review the necessity of "Chungnam-type Doctor UAM Development" to compensate for the problems of the urban aviation mobility (UAM) industry and the emergency patient transport system in islands, a field of the 4th industry.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1281-1282
• /
• 2013

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.541-546
• /
• 1996

사용후핵연료 수송용기의 이송 및 개폐작업을 수행하기 위하여 수송용기 취급장치 (RCGLUD)를 개발하였으며, 카메라 및 다중센서를 사용하여 취급공정을 자동화하는 연구를 수행하였다. RCGLUD는 크레인에 매달려 구동되므로 수송용기에 정확히 위치를 일치시키는 작업이 어려우며, 이를 위하여 카메라 영상정보 처리방법을 도입하여 수송용기의 위치인식 방법을 개발하였으며, 수송용기의 효과적인 파지작업을 위해서 다중센서정보와 신경회로망을 이용하여 RCGLUD의 파지부와 수송용기의 Trunnion을 정확히 조심시키는 알고리즘을 개발하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.184-184
• /
• 2004

볼 나사는 반도체ㆍLCDㆍPDP 등 전자제품 조립장비 제조업체와 CNC 공작기계, 정밀측정기계, 직교좌표로봇, 반송장치, 항공기용 유압구동장치 대체품, 전동공구, 파워 steering, 테이블 개폐장치 등에서 구동 장치 및 물품의 이송을 위해 대부분 사용되는 중요한 기계요소 중의 하나이다. 그것은 회전운동을 직선운동으로 전환해주는 기구부에 들어가는 가장 중요한 부품이며, 원통형의 봉에 나선형의 그루브를 가공한 장축의 나사와 단축의 너트 사이에 볼을 게재시켜 축의 회전 시 적은 구름마찰로 인해, 너트부가 직선 운동하는데 원활 하게 만들어진 기계요소이다.(중략)