• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.532-538
• /
• 2018

This paper proposes an algorithm for signal processing which is used in pulse induction metal mine detectors. The detection power can be obtained from magnetic variation on the search coil. The calibration data should be made when there is no target because the detection power is difference between with and without a target. And it is also updated periodically because of surrounding various noises. Lastly, we keep a watch on the signal slope to identify exact position and signal power of mine detection.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2000

In this paper, we study a cause of malfunction of switch to control drive motor in DFMS(Digital Flux Mapping System) which can measure incore neutron flux of the nuclear plant, and develope a method to solve this problem. DFMS has the type of generating contact signal by mechanical switch lever, which is operated whenever thimble detector inserted or withdrawed through thimble Guide Tube. However the characteristics of the lever tend to be changed by mechanical degrade or bad environment and the lever finally generates errotic contact signal. Therefore we installed electric coil ass'yin the outside of Guide Tube instead of mechanical switch assy's. In addition we applied resonance effect to control circuit and installed condenser in the input of power supply to protect noise and interference. After completion of this improvement, we tested this improved device repetitively under the various conditions. In conclusion, we identified the generation of the desired contact signal and the prevention of detector failure through plant surveillance test during normal plant operation.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.4
• /
• pp.43-51
• /
• 1991

본 논문에서는 전력선 반송통신을 이용한 가정내 전기기기의 감시제어 시스템인 "전동선 HMCS"를 개발했다. 통신방식은 양방향으로서 반송파 주파수 125[kHz]의 FSK디지탈 신호를 전등선에 중첩시키는 방식이며, 제어방식은 Polling 방식을 채용했다. 그리고 시스템의 송신출력은 4Vp-p이고, 수신감도는 CISPR 잡음 규제등을 고려하여 10[mV] 이상으로 설계하였다. 개발 시스템의 성능은 58[dB] 시스템 여유도와 1.78$\times$10-7의 에러확률을 갖는다.에러확률을 갖는다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.97-99
• /
• 2017

본 논문에서는 eLoran 수신기 및 GPS 수신기를 통해 출력되는 NMEA 디지털 데이터를 이용해 GPS 값의 변화를 실시간으로 감시하고, GPS 위치정보의 이상 발생 시 eLoran의 위치정보로 자동 스위칭하여 재밍이나 스푸핑 등의 GPS 전파교란에 대비할 수 있는 장치의 개발에 관하여 연구하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.118-123
• /
• 2004

The compressor has one of important roles in refrigeration cycle and it determines refrigeration efficiency and quality This paper aims to monitor rotary compressors for room air conditioners by using Acoustic Emission(AE) technique. The reliability of rotary compressors has been evaluated through visual inspection on them after long term test. This paper describes methods for acquisition and processing AE raw signal to monitor the state of rotary compressor. A detecting method of abnormal compressor in real time is suggested and special-purpose monitoring system which can be applied to automatic manufacturing line is developed using one-chip microprocessor at low cost.

• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.195-196
• /
• 2016

본 연구는 건설된 구조물의 주요 구조부재에 각종 계측 Sensor를 설치하여 이로부터 다양한 정보를 제공받아 Monitoring하는 계측 System은 대형구조물의 구조적 응답을 계측하여 분석하고, 구조물의 위험요소를 사전에 발견하고 분석하여 적절한 대책을 수립함으로써 대형 시설물의 수명연장 및 유지관리 비용의 효율성을 높이고, 구조물의 사용성 및 안전성을 확보하고, 그 설계수명을 유지할 수 있는 것이다. 계측전 초기치와의 비교 및 시간 경과에 따른 추이 분석을 통해 이상상태를 발견하는 신호 기반 감시 수행하고 있고, 상태판정 및 손상도 추정이 가능하므로 향후 계속해서 발전시켜 나갈 수 있는 지식기반 감시시스템이 필요하므로 본 연구에서는 공간 정보기반의 정보를 재생하여 GNSS/USN기술을 접목시켜감으로 대형시설물 안전관리가 매우 용이하게 적용할 수 있도록 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.92-98
• /
• 2015

Recently, buildings tend to be large size, complex shape and functional. As the size of buildings is becoming massive, the need for structural health monitoring (SHM) technique is increasing. Various SHM techniques have been studied for buildings which have different dynamic characteristics and influenced by various external loads. "Abnormal behavior point" is a moment when the structure starts vibrating abnormally and this can be detected by comparing between before and after abnormal behavior point. In other words, anomalous behavior is a sign of damage on structures and estimating the abnormal behavior point can be directly related to the safety of structure. Abnormal behavior causes damage on structures and this leads to enormous economic damage as well as damage for humans. This study proposes an estimating technique to find abnormal behavior point using Hilber-Huang Transform which is a time-frequency signal analysis technique and the proposed algorithm has been examined through laboratory tests with a bridge model using a shaking table.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1342-1347
• /
• 2010

Various researches have been studied on WSN(wireless sensor network) for barbed wire entanglements surveillance applications such as industry facilities, security area, prison, military area, airport, etc. Currently, barbed wire entanglements surveillance is formed wire sensor network environment. Traditional wire sensor network guarantee high data transmission rate. Therefore, wire sensor network use fast fourier transform of data of high transmission rate for extraction of feature parameter. However, wireless sensor network in comparison with wire sensor network has very low data transmission rate. Therefore, wireless sensor network doesn't use fast fourier transform of wire sensor network for extraction of feature parameter. In this paper, proposed method use 1 level approximation coefficient of DTW(dynamic time-warped) algorithms based on DWT(discrete wavelet transform) for extraction of detection feature parameter and classification feature parameter for barbed wire entanglements surveillance. l level approximation coefficient have time information and frequency information of signal. Therefore, Dynamic time-warped algorithms based on discrete wavelet transform improve detection and classification of target rather than using energy of signal.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.41-47
• /
• 2018

The buoy-enabled underwater surveillance system is a device that is installed in a particular sea area and operated for a certain period of tine and moved to another sea area after recovery. In this paper, a mooring method which is applied for a buoy-enabled underwater surveillance system was selected to maintain installation and enure stable operation. Also, the structure of the mooring line was designed. Two-point mooring method was selected considering interference with the communication cable of array-assembly. The composite structure of buoy chain, nylon rope, and anchor chain is designed as the basic component of mooring line. For the verification of design, a numerical simulation and wave tank experiment were performed. Their results were confirmed similarity in test condition. Finally, the mooring lines were designed for the environment of the sea trial location. The mooring line produced by the final design confirmed the stability above the significant wave height considered in the design on the sea trial.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.43-56
• /
• 1997

다중 표적 추적(MTT:Multiple Target Tracking)은 한 개 또는 그 이상의 센서들을 사용하는 감시(sureillance) 시스템을 위해서 컴퓨터와 마찬가지로 주변상황을 해석하는데 없어서는 안되는 중 요한 요소이다. 레이다, IR(Infrared) 및 Sonar등과 같은 전형적인 센서 시스템들은 여러 가지 신호원 (sources): 문제의 표적, 레이다 지면 클러터(clutter)같은 후면잡음 또는 열잡음같은 내부 오차 요인 으로부터 측정치(measurement)를 만들어 준다. 다중표적용 추적방식의 목적은 센서가 제공하는 측 정 데이터들을 동일한 신호원으로부터 나온 여러 세트의 관측치(observations) 또는 트랙(track)으로 구분해내는 것이다. 이와 같이 일단 트랙이 구성되고 확정되면 후면잡음이나 허위표적을 제거할 수 있 도록 표적의 수를 추산하고 표적의 속도나 예상위치 및 표적의 종류와 기타특성을 계산해낼 수 있다.