• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.951-956
• /
• 2011

As the evaluation of loading characteristic on tilting mechanism is the most important one of the function test of tilting mechanism, the changing characteristic of load must be investigated on tilting of carbody for both the static and running condition of train. In this study, we reduced the load of tilting mechanism by adjusting the interface of carbody and bogie such as the weight balance, level of underframe, height of leveling valve, height of axle box and center position of tilting actuator with the characteristic curve of load for optimal condition of the tilting mechanism obtained in the previous study. Furthermore, the factor and effect of the interfacial structures respecting the load of tilting mechanism was evaluated by analyzing the changing characteristic of load obtained in the process of adjustment of interfaces. From these data, we will propose the maintenance standards for interfacial structures and tilting mechanism in order to minimize the load of tilting mechanism by analyzing in detail the characteristic of load for the main factors of the interfacial structure effecting on the load of tilting mechanism.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.4
• /
• pp.408-413
• /
• 2014

In this paper, we propose a fault diagnosis method based on Park's Vector Approach using the Euler's theorem. If we interpreted it as Euler's theorem, it is possible to easily find the phase angle difference between the healthy condition and the fault condition. And, we analyzed the variation of the phase angle and performed the diagnostic method of the induction motor using feature vectors that were obtained by using a Fourier transform. The analysis of time and speed variation of the motor was performed and, as a result, we could find more soft variations than rough variations. In particular, the analysis of the distortion through each phase shows that two-turn and four-turn shorted motors are linearly separable. In this experiment, we know that the maximum breakdown threshold value for determining steady-state fault detection is 49.0788. Simulation and experimental results show the more detectable than conventional method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.745-748
• /
• 2003

This paper presents a study on pull cord switch system which is employed in various industry for emergency stop of the equipments. By using power line communication(PLC) technique, in this paper, a new method for operation position detection of pull cord switch is suggested without complicated wiring of separate cables which utilize only 2 lines. Also, using control function of PLC IC, a reset signal for each switch reset can be implemented in the switch status control/sensing device. Finally, this paper shows validity and practical applicability of the proposed operating position sensing system of pull cord switch by implementing the system and revealing the response time and signal through the PLC line.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.581-593
• /
• 2010

The objectives of this study were to investigate the effects of raw water pH and basicity of coagulants on turbidity removal with several raw waters having different level of turbidity, alkalinity and pH. Raw waters were sampled from M, S and B water treatment plants(WTP) located at Miryang, Nakdong, Han river, respectively. Six coagulants which have different levels of basicity and aluminum contents were used for this evaluation. High basicity of the coagulant helped to properly control coagulation processes for treating turbid and low alkali raw water. It was difficult for operators to determine optimum coagulant dose for high basicity coagulants, since residual turbidity tended to decrease continuously as coagulant dose increased. Turbidity removal efficiencies with high basicity coagulants(E and F) were higher than the other coagulants at ambient pH for the M WTP. Turbidity removal efficiencies, however, at adjusted pH 7.0 showed similar among six coagulants. Residual turbidity kept low at excess dosages with high basicity coagulants. Optimum coagulant dosages at adjusted pH 7.0 showed higher than those at ambient pH in M WTP. On the contrary in B WTP, optimum coagulant dosage at ambient pH were higher than that at adjusted pH 7.0.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.18-24
• /
• 2003

This paper presents a power transfer capability calculation algorithm considering voltage stability margin. In this method, voltage stability margin constraints are incorporated into a power transfer capability formulation to guarantee adequate voltage security levels in an interconnected power system The proposed method is applied to IEEE-24 reliability test systems and the results show the effectiveness of the method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.30-38
• /
• 2005

This paper proposes a new method which can calculates nodal price as an economic signal at non-optimal operation. By using pseudo constraints in 11 cases, we calculate shadow price and nodal price based on non-optimal operation. By comparing shadow price and nodal prices based on optimal and non-optimal operation effectiveness of the method is verified.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.87-93
• /
• 2003

This paper presents a new harmonics reduction methodology using shadow price. First, we employed shadow price of each bus to reduce harmonics effectively. Second, we developed a new algorithm which can reduce harmonics under limits at PCC and each bus. As a result economical design of filters and its location of the distribution system is possible. This method is applied to the real system, and the usefulness of the method is verified.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.293-300
• /
• 2021

This study presents a Power Quality(:PQ) costs calculation methodology based on Value-Based Methodology. A SCDF including Voltage Sag Costs is presented to calculate Sustained Interruption Costs, Momentary Interruption Costs, and Voltage Sags Costs. Authors compared between interruption costs without Back-Up Power Supply and interruption costs with Back-Up Power Supply, and showed reduction of interruption costs by investing Back-UP Power Supply by multi-lateral analyzation. By applying this method to the real system, evaluated and analyzed power quality of the system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.73-76
• /
• 2022

본 논문에서는 메타버스 공간에서 패션 아이템 판매에 있어서 필수적이라 할 수 있는 온라인 가상 피팅 기술을 동작 인식 전용 디바이스가 아닌 일반 스마트폰 카메라를 활용하여 구현하는 기술을 제안한다. 가상 피팅 기술을 구현하기 위해서는 딥러닝 기법을 활용하여 입력 영상을 분석하고, 분석 결과를 토대로 인체의 전체 자세를 추정하며, 인체 사이즈의 근사값을 추출하는 과정들이 수행되어야 하는데, 현재의 스마트폰 컴퓨팅 환경은 이를 수행하기에 충분한 연산 성능을 가지지 못한다는 문제점을 가진다. 본 논문에서는 높은 비용이 요구되는 고부하 연산을 클라우드 서버를 통해 수행하는 서버 기반 프레임워크를 도입하여, 낮은 성능의 스마트폰으로도 고성능 연산이 가능한 서비스 구조를 확보하고 이를 통해 휴대성 높은 증강현실 기반의 가상 피팅 기술을 구현한다. 본 논문의 성과를 통해 메타버스 상거래의 활성화와 메타버스 본연의 의미에 충실한 가상 월드 구축에 기여할 것이라 기대한다.

• Economic and Environmental Geology
• /
• v.48 no.2
• /
• pp.161-168
• /
• 2015

Total reported gold resources in Peru is about 192 Moz. Gold production in Peru was 4.9 Moz in 2013, which was ranked first in Latin America and sixth in the world. Historic cumulative gold production in Peru is 118 Moz, and production from main gold belts including Miocene epithermal belt, Carboniferous-Permian orogenic gold belt and Upper Cretaceous intrusion-related gold belt corresponds to 84%. Most of production areas are located in Northern part of Peru, which corresponds to 63.5% of the total domestic production. Annual production onces in Yanacocha mine and Alto Chicama were 1 Moz and 0.606 Moz in 2013, which were ranked first and second in Peru, respectively. Gold production in Peru is expected to be 6.5 Moz in 2017. To accomplish the expected production, ongoing 14 projects should be developed to the production stage in three years.