• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제32권9C호
• /
• pp.820-825
• /
• 2007

Super-orthogonal space-time trellis code (SOTTC) uses the expanded set of the orthogonal space-time block code to obtain coding gain and diversity gain without loss of transmit rate. In SOSTTCs, signal set expansions are performed by rotating the first column of the code matrix. The rotating phases used previously were selected to avoid the signal constellation expansion rather than the performance improvement. In this paper, we make a design criterion to select the proper rotating phase to improve the performance of SOSTTCs for fast Rayleigh fading channels. In addition, we design improved SOSTTCs by using the proper rotating phase. Simulation results are also provided to confirm our SOSTTCs are superior to the previous SOSTTCs in the view of BER performance.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 한국방송공학회 2011년도 추계학술대회
• /
• pp.318-320
• /
• 2011

본 논문은 다중경로 페이딩 채널에서 폐루프 MIMO-OFDM 시스템을 구현할 때 효율적인 피드백 정보를 제공하기 위한 채널 품질 지시자(Channel Quality Indicator, CQI)를 결정하는 방법에 관한 것이다. 다중경로 페이딩에서 OFDM심볼의 부반송파들이 주파수영역에서 서로 다른 채널이득을 경험할 수 있고 여러 채널행렬 중에서 어느 채널행렬에 기반해서 채널 상태를 반영하는 채널대표값을 계산해야 하는지 분명하지 않다. 따라서 수신측에서 송신측으로 피드백하기 위해서 하나의 CQI정보를 생성하는데 필요한 채널 대표값이 필요하다. 채널 대표값을 구할 때 쉽게 생각 할 수 있는 방법인 기준신호의 평균 채널행렬을 이용하는 경우에는 채널상태를 정확히 반영하지 못하고 기준신호의 MMSE검출 후 SNR을 검출하는 방식은 채널상태를 정확히 반영해서 성능을 향상시키지만 많은 연산량을 필요로 한다. 이러한 문제를 해결하기 위해 허미시안 연산된 값을 채널 행렬 평균화해서 채널상태를 정확하게 반영하고 연산량을 줄이는 것에 중점을 두고 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제29권4A호
• /
• pp.423-428
• /
• 2004

High-data rate and high speed communication techniques are required for wireless mobile communication systems to provide multimedia services. A multiple antenna technology may be used to meet this demand. In this paper, a method for performance improvement of a WCDMA downlink system using space time block coding is proposed in quasi-static Rayleigh fading channels. The proposed receiver uses the cross correlation matrix obtained by each finger corresponding to multi paths. To obtain maximum diversity gain, the inverse of cross correlation matrix and the Hermitian matrix of the channel matrix for each path arc computed, and then applied to received signals. Various simulation results show that the proposed receiver outperforms a conventional receiver in Rayleigh fading channels.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제33권3호
• /
• pp.39-46
• /
• 2005

In this paper, adaptive higher harmonic control technique using Neural Networks (NN) is proposed. First, linear transfer function is estimated to relate the input harmonics and output harmonics, then NN which has the universal function approximation property is applied to expand application range of the transfer function. Optimal control gain matrix computed from the transfer function is used to train NN weights. Online weight adaptation laws are derived from Lyapunov's direct method to guarantee internal stability. Results of the simulation of 6-input 2-output nonlinear system show that adaptive HHC is applicable to the system with uncertain transfer function.

• The Journal of the Acoustical Society of Korea
• /
• 제15권6호
• /
• pp.12-15
• /
• 1996

An array often has faulty elements in real operation. The faulty elements, producing no output or highly reduced gain than other normal elements, cause an elevated sidelobe level and fail to reject the interference signals in an adaptive beamformer. In this paper we have presented the beamforming algorithm for arrays with faulty elements. In the ideal case, an autocorrelation matrix computed from array output data is the toeplitz. However, the inverse of the autocorrelation matrix computed from array with faulty elements can not be obtained due to deficient values of matrix. To overcome this problem, an adaptive beamforming algorithm using the average values of the diagonal terms of matrix is proposed. The computer simulations have been performed to study the performance of the presented method. We have been able to solve the degrees-of-freedom problem that is the drawback of the previous subaperture processing technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제26권5호
• /
• pp.649-655
• /
• 2022

In this paper, a determinant-based two-channel noise reduction method which utilizes speech presence probability (SPP) is proposed. The proposed method improves noise reduction performance from the conventional determinant-based two-channel noise reduction method in [7] by applying SPP to the Wiener filter gain. Consequently, the proposed method adaptively controls the amount of noise reduction depending on the SPP. For performance evaluation, the segmental signal-to-noise ratio (SNR), the perceptual evaluation of speech quality, the short time objective intelligibility, and the log spectral distance were measured in the simulated noisy environments considered various types of noise, reverberation, SNR, and the direction and number of noise sources. The experimental results presented that determinant-based methods outperform phase difference-based methods in most cases. In particular, the proposed method achieved the best noise reduction performance maintaining minimum speech distortion.

• The Journal of the Acoustical Society of Korea
• /
• 제20권7호
• /
• pp.31-36
• /
• 2001

Passive sonar system forms the various beams in any desired directions to obtain the improvement in Signal-to-Noise (S/N) ratio, bearing detection and localization of targets, and the attenuation of interferences from other directions. The improvement of beamforming is very important to detect modern underwater targets as noise reduction technology leads to considerably low-level acoustic emissions in the long range in complex environmental sea. In this paper, we proposed the spatial cross correlation beamforming (SCCBF) algorithm using cross correlation matrix of individual hydrophone pairs of linear array sensors. By the theoretical analysis and simulation, the proposed SCCBF is demonstrated that its performances compared to conventional beamforming (CBF) output can be obtain above 3dB of array gain and about half of beam width represented the bearing accuracy in target detection. Also, this paper presents sea test result of linear passive sonar system that the proposed algorithm implemented.

• Journal of Korean Association for Spatial Structures
• /
• 제8권4호
• /
• pp.73-80
• /
• 2008

The objective of current study is to develop an optimization technique for the seismic actively controlled building structures using active tendon devices by an efficient solution of LQR control gain. In order to solve the active control system, the Ricatti closed-loop algorithm has been applied, and the state vector has been formulated by the transfer matrix and solved by a numerical technique of the trapezoidal rule. The time-delay problem has been also considered by phase compensation. To optimize the performance index, the ratio of the weighted matrix is the design variable, allowable story drift limits of IBC 2000 and tendon forces have been applied as restraint conditions, and the optimum control program has been developed with the algorithm of the SUMT technique. In examples of the optimization problem of eight stories shear buildings, it is evaluated that the optimum controlled building is more suitable in the control of earthquake response than the uncontrolled system and can reduce the performance index to compare with the controlled system with a constant ratio of the weighted matrix.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제41권3호
• /
• pp.9-16
• /
• 2004

This paper provides an observer-based Η$\infty$ output feedback controller design method for descriptor systems with time-varying delay by just one LMI(linear matrix inequality) condition. The sufficient condition for the existence of controller and the controller design method are presented by perfect LMI approach which can be solved efficiently by convex optimization. The design procedure involves solving an LMI. Since the obtained condition can be expressed as an LMI form all variables including feedback gain and observer gain can be calculated simultaneously by Schur complement changes of variables, and singular value decomposition. Moreover, The proposed controller design algorithm can be extended to the observer-based robust Η$\infty$ output feedback controller design method for descriptor systems with parameter uncertainty and time delay. An example is given to illustrate the results.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제49권10호
• /
• pp.181-186
• /
• 2012

In this paper, we describe the synthesis of robust and non-fragile Kalman filter design for a class of uncertain linear system with polytopic uncertainties and filter gain variations. The sufficient condition of filter existence, the design method of robust non-fragile filter, and the measure of non-fragility in filter are presented via LMIs(Linear Matrix Inequality) technique. And the obtained sufficient condition can be represented as PLMIs(parameterized linear matrix inequalities) that is, coefficients of LMIs are functions of a parameter confined to a compact set. Since PLMIs generate infinite LMIs, we use relaxation technique, find the finite solution for robust non-fragile filter, and show that the resulting filter guarantees the asymptotic stability with parameter uncertainties and filter fragility. Finally, a numerical example will be shown.