• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.157-161
• /
• 2011

This study investigated decomposition the pathway and characteristics of fenitrothion, which is applied on the golf course for pesticide, by ZVI in batch reactor. The removal efficiencies of the pure fenitrothion and the commercial fenitrothion in Smithion by ZVI were compared. The fenitrothion was converted to 3-Methyl-4-nitrophenol and 4-Amino-m-cresol by ZVI. The fenitrothion decomposition rate by ZVI could be expressed by the first order reaction. As increasing the ZVI dosages, the first order rate constants and removal efficiencies increased. The surface area normalized rate constants for the pure fenitrothion and the commercial fenitrothion were 0.0398 and 0.1312 ($L/m^2{\cdot}hr$), respectively. The decomposition of the commercial fenitrothion in Smithion was faster than that of the pure fenitrothion by ZVI, the surfactant in Smithion lead to enhances solubility of fenitrothion and disperse ZVI.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2003

Since the scale in pipes reduces the flow rate, a quantitative evaluation of the scale is essential for the proper maintenance of pipes. Guided waves were employed to estimate the amount of scale in water supplying pipes. Using variable angle wedge, several modes of guided waves wire generated and their propagation charcteristics along the pipes with stale were analyzed. It was experimentally observed that the amplitude of F(M,2) modes at $f{\times}d=1.5MHz\;mm$ decreased significantly with increasing amount of scale. The present study showed that F(M,2) modes were optima) to evaluate the scale in water supplying pipes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.300.2-300.2
• /
• 2014

테라헤르쯔(terahertz : THz)파는 0.1~10 THz 의 범위로 적외선과 방송파 사이에 광대역 주파수 스펙트럼을 차지하고 있으며 직진성, 투과성, 그리고 낮은 에너지(meV)를 가지고 있어 비 파괴적이고 무해한 장점을 지니고 있다. Ti:sapphire laser와 같은 femto-pulse source 등이 많은 발전이 되어 현재 많은 연구와 발전이 이루어지고 있다. femto-pulse source를 이용한 THz 응용에서는 높은 저항, 큰 전자이동도, 그리고 아주 짧은 전하수명의 기판을 요구하는데 저온에서 성장한(low-temperature grown : LT) InGaAs는 격자 내에 Gallium 자리에 Arsenic이 치환 하면서 AsGa antisite가 발생하여 전하수명을 짧아지는 것을 응용하여 가장 많이 이용되고 있다. 본 연구에서는 보다 높은 저항을 얻기 위하여 molecular beam epitaxy를 이용하여 semi-insulating InP:Fe 기판위에 격자 정합된 LT-InGaAs:Be/InAlAs multi quantum well (MQW)를 well과 barrier를 가각 $10{\mu}m$ 씩 100주기 성장을 하였고 Ti와 Au를 각각 30, $200{\mu}m$로 dipole antenna를 제작 하였다. 이 때 Ti:sapphire femto-pulse laser (30 fs/90 MHz)를 excitation source로 사용하였을 때 9000 pA로 LT-InGaAs epilayer (180 pA)보다 50배 이상 큰 전류 신호를 얻을 수 있었다. THz 발생과 검출을 초소형, 초경량, 고효율로 하기 위해서는 fiber-optic를 이용해야 하는데 이때 분산과 산란 손실이 가장 적은 1550 nm 대역에서 많은 연구가 이루어 졌다. 780, 1560 nm의 mode-locking laser (90 fs/100 MHz)를 사용하여 현재 많이 이용되고 있는 Ti:sapphire femto-pulse laser와 비교하여 THz 특성 변화를 확인하는 연구를 진행 하고 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.751-762
• /
• 2000

In the forthcoming next generation highspeed networks, the provisioning of broadband mobile multimedia services is the most important issue while an efficient network management architecture, which can manage the network resources efficiently, is essential. The next generation highspeed networks will be composed of the ATMand SDH-based transport network systems and the H-based interworking systems. The management functions of these network systems are implemented various technologies, such as TMN and SNMP. In order to integrate these network resources efficiently with heterogeneous management functions, the distributed network management architecture such as TINA is most appropriate. In this pape, we propose an interworking architecture for TINA manager and TMN agent. where the TINA-based EML subnetwork management operations mapped into the related management operations of the TMN NE agent. The proposed interworking architecture is simpler than JIDM, and the processing overhead is minimized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.657-660
• /
• 2007

In the present age, a vehicle works important part in our lives and economical domain that transport people, freights, and everything. And both of its number and value are increasing more and more. But user's convenience, control system could not be archived improvement than technological success. In this paper, we suggest some kinds of administrative agendas; simplifying executive processes, designing vehicle information system using by RFID which includes Ubiquitous skill and optical communication network. Especially, this paper suggests public vehicle control model which can simplify every executive processes of vehicle's life in the newest method. There are many kinds of RFID applicative products about transportation. And a dual invest should be interrupted for economical purpose. So this paper also proposes some way for problems of these types.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.418-424
• /
• 2019

The present study investigated the effects of the moment arm length on balance and walking when carrying a backpack. In total, 30 normal adults without orthopedic and neurological injuries were assessed. For each subject, balance and gait were measured under three conditions: 1) the no backpack condition, 2) the general backpack condition, and 3) the decreased length of moment arm backpack condition. There were significant differences in the center of the pressure area and velocity between the three conditions, whereas there was no significant difference in the center of the pressure area and velocity according to the moment arm length. There were significant differences in double limb support time and walking velocity under the three conditions, and there was a significant difference only in double limb support time according to the moment arm length. The results of the present study showed that a change in the length of the moment arm can be helpful for walking when carrying a backpack.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.98-105
• /
• 2007

In this paper, we propose a timing detector using suboptimal maximum likelihood method. The proposed method has an simple reference signal generator. Additionally, timing detector's gain of the proposed method is the same to Early-Late gate and ML method. We reveal that tracking range of time tracker is narrow because of using data-decision, that is, tracking range is ${\pm}0.06ns$ for the 4-order Gaussian monocycle with 0.7ns pulse width. Therefore we can find that searcher must have very accurate acquisition procedure. When estimating a performance of time tracker, we consider a jitter in transmitter and receiver's pulse generation process as well as background noise. By using computer simulation, we propose mean/variance of timing detector and tracking process. Also we consider a mobility in tracking process, i.e., timing error modeled ramp function. In order to propose a performance of time tracker, we consider only one correlation demodulator.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.5
• /
• pp.411-416
• /
• 2002

Recently, the trial and success of malicious cyber attacks has been increased rapidly with spreading of Internet and the activation of a internet shopping mall and the supply of an online internet, so it is expected to make a problem more and more. Currently, the general security system based on Internet couldn't cope with the attack properly, if ever, other regular systems have depended on common softwares to cope with the attack. In this paper, we propose the positive selection mechanism and negative selection mechanism of T-cell, which is the biological distributed autonomous system, to develop the self/non-self recognition algorithm, the anomalous behavior detection algorithm, and AIS (Artificial Immune System) that is easy to be concrete on the artificial system. The proposed algorithm can cope with new intrusion as well as existing one to intrusion detection system in the network environment.

• Journal of Convergence for Information Technology
• /
• v.10 no.1
• /
• pp.22-27
• /
• 2020

With the deployment of 5G infrastructure, content delivery network (CDN) will be a key role to provide explosive growing services for the independent media and YouTube which contain high-speed mobile contents. Without a local cache, the mobile backhaul and fronthaul should endure huge burden of bandwidth request for users as the increase number of direct accesses from contents providers. To deal with this issue, this paper fist presents both fronthaul solutions for CDN that use dark fibers and a passive optical network (PON). On top of that, we propose the aggregated content request specialized for PON caching and evaluate and compare its performance to legacy schemes through the simulation. The proposed PON caching scheme can reduce average access time of up to 0.5 seconds, 1/n received request packets, and save 60% of backhaul bandwidth compared to the no caching scheme. This work can be a useful reference for service providers and will be extended to further improve the hit ratio of cache in the future.

• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.31-38
• /
• 2002

Polymerization of carboxylated styrene-butadiene latex takes longer time than that of acrylic emulsion due to delocalization of radical in butadiene unit having conjugated double bond. A latex stability is the most important properties owing to use intact without separating polymer from base latex. For reducing polymerization time without decreasing any properties of latex, carbon tetra-chloride which has been used as the most popular chain transfer agent was replaced to combination of tert-dodecylmercaptane and ${\alpha}$-methylstyrene dimer. The replacement yielded reducement or 2 hr in polymerization time. In the increment step, charge amount of acrylic acid was limited to 0.3 part to restrain viscosity enhancement. Just after initial step, addition of 0.1 part acrylamide prevent polymer chain from diffusing between two region followed by giving hardness and final good adhesive force to latex particles.