• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.20-23
• /
• 2011

본 논 연구에서는 이동전화기를 인위적으로 손상시켜 놓고 제품의 결함에 의해 문제가 발생한 것처럼 주장하는 소비자의 부도덕한 주장이 잘못됐음을 밝히기 위한 것이다. 이동전화기의 내부 또는 배터리 단자 사이에 바닷물, 땀, 침 등이 스며들어가면 단자 사이에 누설전가 흘러 그 때 발생된 열에 의해 금속이 용융되는 특징을 알 수 있다. 이동전화기가 생리 식염수에 빠지면 일정 시간이 경과된 후에 진동의 발생과 동시에 불규칙적으로 자판이 켜짐과 꺼짐의 반복이 발생하며, 배터리를 제거하면 진동, 켜짐 및 꺼짐 등이 정지한다. 이동전화기 내부에 바닷물, 땀, 침 등이 많이 흘러들어가 부품에 손상에 생겼더라도 단자간의 전압은 정상상태와 동일한 3.9V를 나타냈다.

• Journal of Digital Convergence
• /
• v.8 no.1
• /
• pp.109-120
• /
• 2010

Mobile phone-related industries have been mainly concentrated on attracting the new customers and increasing the market share such as for the aggressive marketing activities, but it is the time to find an effective strategy to preserve existing customers since the mobile phone market had already reached the saturation. In this study, the properties of mobile phone that influence on the choice of handset and telecom company were analyzed. General properties of respondents were explored and the mobile phone properties were grouped by common factors. And analyzed the effect of factors on customer satisfaction with structural equation model. 10.4% of respondents are used their handset more than two years and 48.7% wanted to purchase other manufacturer's handset if they repurchase mobile phone. These results might come form the fact that the life cycle of mobile phone become shorter by the heating competition in mobile phone market and, to some degree, the influence of smart phone which recently become globally popular. Four factors, 'Hardware Quality', 'Practicality', 'Convergence Functions' and 'Level of Awareness', are induced from the mobile phone properties. In Structural Equation Model analysis, 'Hardware Quality' and 'Practicality' have significant and positive effects on Customer Satisfaction. But, 'Awareness' such as brand and trend appeared quite less influence on the customer satisfaction.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.21-26
• /
• 2011

The purpose of this paper is to present the damage patterns of cellular phone (SCH_W830) batteries according to energy sources and have them utilized as data for the settlement of disputes between manufactures and consumers. The reliability was secured by maintaining the ambient temperature and humidity at $22{\pm}2^{\circ}C$ and 40~60 %, respectively. The voltage of the battery used for the tests was measured to be 4.18V between positive pole (+) and negative pole (-)(1), and 4.19 V between positive pole (+) and negative pole (-)(2). This study applied the Korean Industrial Standard (KS) to the flammability test of cellular phones due to a general flame applied to them and found that no damage occurred to the built-in battery even though the flame was applied to the cases of cellular phones for 30 seconds. From the results of immersing the cellular phones in the saline solution (NaCl, 0.9 %) for 180 seconds, it was found that there was a trace of carbonization and melting due to the heat caused by leaking current. It can be seen that when the cellular phones were heated for 70 seconds using a microwave oven (MWO), the areas containing the metal holder, recharging connector, antenna, etc., were melted and discolored and that other areas showed no particular problems. That is, while the external carbonization of cellular phones, built-in metals and dielectric materials, and damage and deformation of the battery terminal block, etc., occurred differently depending on the types of energy sources, the voltage showed comparatively constant characteristics. Therefore, it is thought to be possible to attribute the cause of damage to the battery by performing analysis taking into consideration comprehensively the characteristics of the flame spread pattern as well as the melting and deformation of metals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2463-2469
• /
• 2011

The failure of display modules in cellular phones due to drop impact depends on the materials, stiffnesses and shapes of the phones. In the early development stage of cellular phones, the behavior of the display modules due to drop impact is tested using jigs where the display modules are installed. In this study, jigs of cellular phones for drop impact test of OLED modules were designed. The material, thickness and number and orientation of ribs were considered as design variables. Jigs were designed in a way that responses of modules due to drop impact were similar to those of modules in cellular phones. The maximum principal stresses at the upper glasses of modules were considered as responses, which were analyzed using a commercial software ABAQUS/Explicit. The drop impact analysis at the height of 1.5 meters showed that the responses of OLED module in the developed jig were in a good agreement with those in cellular phone.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.370-373
• /
• 2001

요즘 작고 빠른 장치에 관한 새로운 열풍이 불고 있다. 이들은 이동 중에도 정보에 접근할 수 있고, 웹과 이동 전화기의 개념을 합쳐 놓은 장치라고 할 수 있다. 무선 애플리케이션 프로토콜 (Wireless Application Protocol : WAP)은 산업 전반적인 표준으로서 인터넷 컨텐츠와 서비스를 이동 전화기에서 접속할 수 있도록 해주는 통신 프로토콜과 애플리케이션 환경을 정의한다. 본 논문에서는 오픈소스로 진행되고 있는 Kannel WaP Gateway를 이용하는 WAP브라우저를 설계및 구현하였다. 임베디드 리눅스가 탑재된 모든 단말기에서 동작할 수 있으며 무선 인터넷을 통해 WAP사이트에 접속하고 컨텐츠를 디스플레이 할 수 있도록 해준다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.985-997
• /
• 1999

In this paper, the detection of 1 g and 10 g averaged SAR on human head caused by PCS handheld phones is analyzed and discussed. Conventional monopole antenna and planar structured PIFA are used in the computational model to apply to the antennas mounted on handheld phone. These antennas are designed to operate in the near of frequency 1.8 GHz, human head model is sampled to have cell size 1.5 mm and sloped to front direction by 30$^{\circ}$. It is found that, when monopole antenna is applied, 1 g averaged SAR is 1.4 W/kg, 10 g averaged SAR is 0.7 W/kg, when PIFA is applied, for each case, SARs are 1.143 W/kg, 0.4866 W/kg. While the radiation pattern of the monopole antenna is symmetrical, that of planar structured antenna is asymmetrical and SAR caused by PIFA is less than SAR by the monopole antenna. The radiation efficiency of PIFA is 62.6%, which is higher than that of monopole, 53%.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.12-21
• /
• 1997

무선의 자원을 사용하는 통신장비들의 급속한 보급으로 인체가 RF에 노출될 때의 영향에 관심이 고조되고 있고, 이동 전화기의 인체영향에 대한 연구가 활발히 진행되고 있다. 이를 바탕으로 국제적인 인체영향 규제치와 규정근거 및 측정방법에 대한 이론적 전개가 활발히 진행되고 요구된다. 특히, 이중에서도 셀룰라 전화기에서 발생하는 RF의 인체영향에 대한 역학적 또는 암 발생에 관한 국 제연구 동향을 살펴보고 셀룰라 전화기와 심장박동기의 간섭에 대하여 알아본다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.31-40
• /
• 1999

Characteristics of monopole antenna and planar conductor structure mounted on handheld telephone are anlayzed by using FDTD method. Feeding of monopole antenna is implemented with lumped elements and plastic case is coated on the surface of conductor box. Otherwise, resonant frequency of handheld telephone mounting monopole antenna with no plastic case is 877MHz, when plastic case (${\varepsilon}_r=2$) is coated, the resonant frequency is down to 82MHz and the bandwidth is broadened about 1.5 times. Planar structure of handheld telephone mounted on the body makes to change far-field gain radiation patterns. In this case, radiation patterns are somewhat asymmetrical. Handheld telephone using PIFA(Planar Inverted F Antenna), instead of monopole antenna, is resonated at frequency 1.52GHz that is available onPCS. In the radiation pattern of this structure, azimuth that electric field intensity is presented below 20dB is 14$^{\circ}$.

• Journal of Korean Electronics
• /
• v.14 no.8
• /
• pp.51-55
• /
• 1994

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.406-411
• /
• 2009

In this paper, we study the method of noise analysis for analysing TDMA noise in a GSM mobile phone and describe the cause of TDMA noise. And we reduced noise by 9dB, 3.5dB, 6dB, using MIC shielding, equipped bead or capacitance, connected PCB ground based on the difference analysis method, which is one of common noise analysis methods.