• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.66-74
• /
• 2007

Stationary and trolling methods in measuring flow using flowmeter were adopted to investigate the hydraulic connectivity of fractures and to evaluate the applicability of the measurement methods. Stationary method was useful for identifying the inflow and outflow patterns in the measured section, which enabled us to analyze the hydraulic connectivity of fractures between the wells. Trolling method failed to find the inflow and outflow patterns in the well, but was very effective for locating the conductive fractures. Measuring flow in the borehole by both stationary and trolling methods was found to be very efficient for identifying conductive fractures and their hydraulic connectivity in fractured rock aquifer.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.3
• /
• pp.1-10
• /
• 2014

Several types of methods such as resistivity survey, ground penetration radar, etc are used for detection of levee leakage and according to the river design guidelines detection of levee leakage is performed by measuring the hydraulic conductivity of levee soil. But, the former can not verify the leakage point and degree of saturation, the latter is an after treatment method. Movable sensor, which is a high-tech TDR system developed since 2000, can obtain directly the dielectric constant profile covering the whole depth of levee. In this study, laboratory and field model experiments were carried out using movable TDR sensor in order to evaluate the applicability as detection system of levee leakage, As the result, movable TDR system has proven to be 3 times more sensitive to water contents than dry unit weight, and the results conclude that the dielectric constant, water contents and density of the ground proved to have a correlation among them, and the dielectric constant is expected to be a basic data on detection of levee leakage.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.323-331
• /
• 2008

Digital close-range photogrammetric technique can measure and describe 3D geometric form from 2D image. This technique is a growing applicability in the field of sciences. Nevertheless, civil and mechanical field, which need measurements as precise as possible, use expensive measuring instruments in general. In addition there are occasions for analysis by means of visual method, since appropriate measuring instruments have been not yet available. This study therefore developed digital close-range photogrammetric technique with a movable orientation board to quickly measure deformation before and after destruction from simulated ground model of reinforced-soil wall. Then the results are compared with the measurements obtained using digital theodolite.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.353-359
• /
• 2006

Image frame analysis is a conventional way of evaluating loop detector's performance. In image frame analysis, the time to evaluate performance is linearly proportional to the number of evaluated subjects, and the results can be subjective, depending on operator's personal evaluation standards and physical condition. Also, this method is often inferior in accuracy to that provided by the evaluated devices. Therefore, it is critical to develop a portable standard system which has better accuracy and more objectivity in evaluating vehicle detectors. This paper discusses function and reliability of tape-switch detector, which can be a replacement for image frame analysis, for effectively measuring traffic volume, speed, and occupancy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.657-663
• /
• 2014

Since 2007, the defect confirmation test for vehicles using PEMS has been enforced in USA. This test can measure emissions from on-street vehicles using a device mounted on a car. Europe has confirmed its plan for introducing this test from EURO6, 2013. Thus, the Korean government is also under pressure to adopt this method that reflects the real-world driving conditions using PEMS, considering the emission controls for domestic heavy-duty vehicles. To provide various utilizations of the PEM, this emission test has been developed in accordance with the type of driving road, DPF, ISG, and air conditioner. This research aims to provide the fundamental materials for implementing defect confirmation tests for commercial vehicles, which are appropriate for domestic emission control situations, after studying the defect confirmation test methods for heavy-duty vehicles using PEMS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1844-1849
• /
• 2014

Existing measurement methods using microscopes or surface roughness measurement instruments for surface control in manufacturing die are low in their efficiency when they are applied in industrial fields due to structural problems. Therefore, it is very important to develop a measurement and analysis system which can enhance efficiency in the measurement of different-sized manufacturing dies and provide quality control regardless of location. This study aimed at the development of a portable surface measurement system to satisfy this need. This measurement system was designed and manufactured in such a way as to divide it into three parts: the Base, the Body, and the Optical system. As a result of testing the system, the surface roughness was measured with an accuracy between 94.9 and 99.9%, and the deviation in the measurement value of a circle was within $2{\mu}m$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.220-224
• /
• 2004

하천유량은 이수${\cdot}$치수${\cdot}$환경 관련 사업에서 매우 중요한 기초자료이다. 현재까지는 평${\cdot}$저수시에는 점유속계, 홍수시에는 부자를 이용하여 유량을 측정하고 있다. 이러한 방법에는 많은 측정인원과 비용 및 시간이 소요되고 홍수시에는 안전사고의 발생 가능성도 있다. 이를 해결하기 위하여 고정식 초음파유속계를 이용하는 유량측정법의 적용성 및 타당성을 검토하였다. 초음파유량계의 유량을 검증하기 위하여 프라이스컵 유속계, 마그네틱 유속계 및 이동식 초음파유량계 (ADCP) 등 기존 유량측정법으로 유량을 측정하여 서로 비교하였다. 그 결과, 약간의 차이는 있지만 서로 잘 일치하고 있음을 알 수 있었다. 향후 고정식 초음파유량계를 이용한 하천유량측정의 실용화가 가능한 것으로 판단되었다.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.31-43
• /
• 2012

Domestic road type-and period-specific driving pattern measurement was required as Korea's participation in developing "Worldwide harmonized light-duty vehicle emission test procedure (WLTP/DHC)" studied by UN WP29. This study measured road driving data reflecting road and traffic conditions of Korea, and analyzed seven types of representative road type-and period-specific driving patterns with driving pattern standardization methodology proposed by WP29. PAMS (Portable Activity Monitoring Systems) equipment was used to collect enormous (35,410km) road driving data. There are significant difference among seven derived driving patterns.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2019.08a
• /
• pp.201-202
• /
• 2019

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.471-478
• /
• 2016

For the distribution of fresh produce, the thermoelectric cooling system combined with thermo electric materials (TEM) and phase change material (PCM) was studied. The PCM used this study was produced by in-situ polymerization technology which referred microencapsulation of hydrocarbon (n-tetradecane and n-hexadecane). In this study, quality characteristics of bell peppers in thermoelectric cooling system combined with TEM and PCM were analyzed and control was placed in an EPS (expanded polystyrene) box. As a result of quality characteristics analysis, weight of bell peppers decreased and moisture content of bell peppers was 90.96~94.43% during storage. Vitamin C content of bell pepper decreased during storage and reduction ratio of control was higher than that of BPT-5 treatment(bell pepper in thermoelectric cooling system with PCM which is kept the temperature at $5^{\circ}C$). The result of color value, on 21 day, ${\Delta}E$ value of BPT-5 treatment was 5.05 while that of control was 41.8. On 21 day, total bacteria count of BPT-5 treated bell pepper shown less than that of control. In conclusion, it suggested that the thermoelectric cooling system combined with PCM improved quality of fresh produce during transportation and storage.