• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.61-65
• /
• 1990

The purpose of this study was to investigate the effect of Bent-up Bars in Beam-Column Joint with High-Strength Concrete up to 800 kg/$\textrm{cm}^2$. 5 specimens were tested under reversed cyclic loadings. The primary variables were the number of the Bented Bars with Joint Core, compressive strength and loading patterrns. The results showed that bent-up bars in beam-column joint prevented crack from extending into core but the failure was concreterated at the face of beam-column joint. Thus shear stress constant value(Г) should be revised for High Strength Concrete Beam-Column Joint with Bent-up Bars.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 봄 학술발표회 논문집
• /
• pp.54-59
• /
• 1991

This experimental investigation was aimed at gathering information on the flexural properties, including ductility, of high-strength lightweight concrete members(concrete with a dry unit weight of approximately 1.85t/$\textrm{m}^3$ and with compressive strength approaching 630kg/$\textrm{cm}^2$ at 56days) under reversed cyclic loading. Two sets of six specimens each were manufactured using lightweght aggregate concrete having compressive strength of 350kg/$\textrm{cm}^2$ at 28days and 630kg/$\textrm{cm}^2$ at 56days. The test variables were the concrete strength, the amount of longitudinal reinforcement, and the spacing of ties. The test results, including hysteretic load-deflection curves, for the specimens representing columns under zero axial load are reported in this paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.923-928
• /
• 2002

Experimental and analytical study were conducted to develop the confined model of reinforced high strength concrete tied columns subjected to monotonically increasing concentric axial compression. Twenty-one large-scale columns(260$\times$260$\times$1200mm) used high strength concrete of 50 and 85MPa were fabricated to simulate an actual structural members size. Test results indicated that gains of strength and ductility of high strength concrete columns could be increased, if efficient arrangements and volumetric ratios of transverse reinforcements were provided. The proposed model satisfactorily predicted the experimental stress-strain curves for high strength concrete up to 100MPa.

• 콘크리트학회지
• /
• 제1권1호
• /
• pp.67-74
• /
• 1989

건축물의 고충화, 대형화 및 특수화에 따른 콘크리트의 고강도화는 필수적이다. 그러나 고강도화는 높은 취성파괴 양성을 보여주며, 이들이 전단파괴의 병합될 때 구조체의 안전성에 큰 문제를 던져주고 있다. 본 연구는 고강도 콘크리트(f'c=800㎏/㎠)보가 전단보강이 되어있지 않은 경우 전단강도 및 파괴 양성을 조사하기 위하여 주요변수로서 전단스팬비(a/d)=3.0, 4.0, 6.0그리고 주근비 (ρt)=0.5ρb, 1.0ρb로 하였다. 실험결과, 현재의 건설부 극한강도 구조 규준식이나 ACI규준식은 주근량과 a/d의 효과를 과소평가하고, 콘크리트의 강도 증가에 따른 잇점은 과대평가하고 있는 것으로 판명되었다.

• 콘크리트학회지
• /
• 제2권4호
• /
• pp.53-60
• /
• 1990

전단보강된 고강도콘크리트 보의 역학적 거동을 알아보기 위하여 총9개의 시험체가 제작되었다. 콘크리트 압축강도가 800kg/$\textrm{cm}^2$ 전단스팬비가 3 그리고 주근비가 0.5Pb로 일정할 때 주요변수로서 전단보강비(Vs=0,25,50%)와 섬유첨가율(Vf=0,0.5,1%)로 두었다. 시험결과로 섬유첨가율의 증가에도 극한강도의 변화는 별반 없었으나 연성 능력을 향상시켰으며, 전단보강철근으로의 대체성을 보여주었다.

• 월간 기계설비
• /
• 통권167호
• /
• pp.16-19
• /
• 2004

관악구 신림동에 위치한 관악우체국 청사 개축 기계설비공사는 정보통신부 조달사무소로부터 분리발주로 수주된 현장이다. 미작산업(주)(대표 배태석)와 (주)광운기전(대표 이광수)이 기계설비공사를 공동도급으로 시공하고 있으며 미작산업이 51%, 광운기전이 49%의 공사를 맡고 있는데 기계실 및 공조배관, 덕트. 위생배관 등 주요 공사는 광운기전이, 정화조, 자동제어, TAB, 연도 등 주로 외주제작은 미작산업이 시공하고 있다. 원래는 광운기전과 일성공업이 공동으로 수주받았으나 일성공업이 부도나는 바람에 일성공업의 보증업체인 미작산업으로 대체된 것이다. 공사금액은 13억9천 5백만원으로 지난 2003년 10월에 시작하여 오는 2006년 1월까지 완공예정이었으나 공사의 빠른 진행으로 6개월여를 앞당겨 오는 2005년 6월경 완공 예정이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.220-223
• /
• 2009

Tidal power plants such as Shihwa, Garorim and so on are under construction or planned to construct in Korea. However it can be estimated that the inappropriate community assistant program for tidal power plant is applied because tidal energy is imposed on a new and renewable energy criterion in Korea. Therefore in this paper, the optimum funding and region boundaries of community assistant program for tidal power plants are derived in order to improve beneficial effects of the community assistant program for tidal power plants in Korea.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.166.2-166.2
• /
• 2011

Incheon Bay of Korea is one of the most famous regions for high tidal range. Ministry of Land, Transport and Maritime Affairs(MLTM) has implemented preliminary investigation for tidal power energy development in this area since 2006. Through field observations, various kinds of marine data consisting of depth and geography, marine weather, tidal currents, wave, seawater characteristics, geology, marine ecosystem and marine environment were gathered. To use these data efficiently for the determining of feasibility of developing and appropriateness of project scale, spatial data management and application system is essential. Therefore, in this study, the concept, methodology and procedure of spatial data modeling are defined for tidal energy development. Spatial data modeling consists of essential model relating to tidal energy directly and optional model including environmental factors. Essential model is composed with fundamental elements like as depth, geography, and several numerical modeling results(tide, tidal current, wave).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.613-616
• /
• 2007

The main structures that comprise a tidal power plant are turbine structure, sluice structure, tide embankment and gate. Since these structures are founded on seabed ground, an extensive geotechnical site investigation to evaluate the engineering properties of field soils must be conducted prior to design and construction. According to the results of geotechnical site investigation conducted at the planned site for construction of Incheon bay tidal power plant, soft ground generally lie 7 meters below the seabed surface level. This research suggests the reliable and economical design of foundations and ground improvements required for construction of main structures in Incheon bay tidal power plant, with considerations on field conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.635-638
• /
• 2007

In this paper, we described the fundamental concepts of proposed structural health monitoring system for Uldolmok Tidal Current Power Plant focusing on the use of smart sensors including fiber bragg grating sensors and macro fiber composite sensors. The structural health monitoring system can play an important role to maintain the structural safety for offshore structures like as bridges and high-rise buildings. In the case of tidal current power plant, the monitoring system is much more important since the structures are usually constructed at the site with severer environmental loadings such as high current speed.