• Korean Journal of Remote Sensing
• /
• v.6 no.1
• /
• pp.1-9
• /
• 1990

This paper presents a method of the constructing DEM(Digital Elevation Model) from the image data acquired from a commercial map using the scanner. Data acquistion, mark elimination, linking the broken line, elevation interpolation and 3D display processing are performed and the results are satisfatory.

• Korean Journal of Remote Sensing
• /
• v.5 no.2
• /
• pp.133-145
• /
• 1989

This paper describes an implementation of linear feature extraction algorithms for satellite images and a method of automatic GCP(Ground Control Point) filing using the extracted linear feature. We propose a new linear feature extraction algorithm which uses magnitude and direction information of edges. The result of applying the proposed algorithm to satellite images are presented and compared with those of the other algorithms. By using the proposed algorithm, automatic GCP filing was successfully performed.

• Journal of Engineering Education Research
• /
• v.16 no.1
• /
• pp.15-26
• /
• 2013

The present study was conducted to investigate science and engineering graduate students' proficiency in technical English writing and their perceptions of research ethics. Given that graduate students in science and engineering colleges usually write journal articles as well as dissertations in English, this study examined their experience of and preparation for technical English writing, writing practices, and research ethics including plagiarism. The results of the study show that it is very necessary to intensify education on research ethics and to provide educational training in proper citation practices. These findings can be used as a basis for the development of future academic curricula and other support resources to improve science and engineering graduate students' technical English writing.

• Journal of Science Education
• /
• v.43 no.2
• /
• pp.207-226
• /
• 2019

The purpose of this study is to investigate how fusion science program for undergraduate general education influences the understanding of Nature of Science (NOS) and STEAM Literacy of students majoring in science and engineering in college. The students participated in the pre/post NOS survey(Lee, 2013) and the STEAM literacy survey(Choi et al., 2013) in the program. The results of this study are as follows. First, the fusion program was effective in understanding the NOS because there is a statistically significant difference between the pre/post tests.(p < 0.01). Second, while there were no significant differences between genders, however, there is a significant difference in students' majors in NOS understanding(p < 0.05). Third, it showed that improvement in STEAM Literacy in Convergence and Creativity domains is significant(p < 0.01). By contrast, the Caring domain of STEAM Literacy was decreased statically significant(p < 0.01). In the end, there is no difference in STEAM Literacy between genders as well as among students' major(p < 0.05).

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.55-62
• /
• 2019

In this paper, we introduce a case of a fire accident during parking of a large truck that is repeatedly occurring. The shape and location of the combustion and electrical singularity commonly found in other vehicle fire accidents could limit the starter motor as the ignition section. In addition, it was possible to confirm the electrical melting singularity that could act as a cause of ignition between the start motor B terminal and the start motor enclosure. By combining the above investigations and investigations, it was possible to estimate the electric fire expressed from insulation breaking of the starter motor B terminal, and by using the renewable starter motor comparison product mounted on the fire vehicle, an experiment was performed to reproduce the ignition process from the starter motor under specific conditions. So. It is hoped that this will raise awareness about vehicle fires, which can lead to large fires or casualties, share the risks of using starter motors for regeneration, and help in the rapid and accurate investigation of similar vehicle fires in the future.

• Journal of Apiculture
• /
• v.32 no.3
• /
• pp.181-189
• /
• 2017

Lysinibacillus fusiformis has been suspected to be a pathogen of Bombus terrestris in Korea since 2008. In this study, we developed the rapid detection method for the L. fusiformis by utilizing the Ultra-rapid PCR. After optimizing of L. fusiformis-specific Ultra-rapid PCR, it can detect the existence of $1.0{\times}10^8$ L. fusiformis-specific DNA molecules in 4 minute and 22 seconds. Even, only 10 molecules could be detected quantitatively using this method. In addition, for the first time, in our knowledge, L. fusiformis was detected using proposed method from bumblebee produced commercially in Korea. Not only in the laboratory but also in the field, L. fusiformis-specific Ultra-rapid PCR would be applied and might be expected as convenient tools at production of bumblebee or inspection for the import and export of bumblebee.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.106-113
• /
• 2002

This research was performed to investigate the effect of moulding conditions on properties of the table top for student desk manufactured by wood waste materials. The table top manufactured using the mat mixed properly with fine particles and coarse particles generally showed better physical properties than those manufactured using either fine particles or coarse particles did/ Especially, highest performance for overlaying was observed when fine particles were used for face layer and coarse particles were used for core layer. The internal bond (IB) strength, the bending strength and thickness swelling increased with the increase of density. Most of physical properties were improved with the increase of hot pressing temperature. The best physical properties were found at 190℃ when the first hot pressing and the second hot pressing times were two minutes. However, the effect of the second hot pressing time of two minutes on the physical properties was not markedly different from that of one minute. This result suggests that the second hot pressing time of one minute is enough to increase the productivity in manufacturing the table top with the least decrease of the physical properties.

• Venture DIGEST
• /
• s.16
• /
• pp.10-11
• /
• 2003

바야흐로 본격적인 졸업시즌이다. 모두가 졸업을 축하고 새로운 시작에 격려해야 때이지만 대학을 졸업하고도 취업이 안돼 고민하는 젊은이들이 늘고 있고, 이러한 극심한 취업난은 몇 년째 이어져 사회문제로 대두되고 있다. 그러나 아이러니컬하게도 이러한 극심한 청년실업에도 불구하고 산업 기술·기능 인력은 부족해 일선에서는 심각한 인력난을 겪고 있는 것이 우리 사회의 현실이다. 우리 사회는‘과학기술입국’을 내세웠던 1960년대부터 이공계의 전문 인력 양성에 상당한 노력을 기울여왔고, 그런 노력은 최근까지 이어져 왔다. 이제 본격적인 지식기반 사회로의 진입을 앞두고 기술·기능 인력의 양성을 위한 이공계의 중요성은 다시 강조될 수밖에 없지만 이런 사회적 중요성을 철저하게 외면되고 있고 이의 결과는 기술·기능 인력의 심각한 인력난으로 나타나고 있다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2006.04a
• /
• pp.134-138
• /
• 2006

• The Korean Publising Journal, Monthly
• /
• s.51
• /
• pp.27-27
• /
• 1989