• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.161-162
• /
• 2009

최근 국내에서 유행하기 시작한 스키니 진(skinny jean)은 혈액순환 장애, 하복부 장기에 가해지는 압력으로 인하여 소화불량, 변비 또는 생리불순 등 여성 건강을 위협하는 의복 종류이다. 본 연구의 목적은 의복의 쾌적성을 측정할 수 있는 척도인 의복압 검사와 스키니 진의 주관적인 착용감 검사 통하여 의복의 기능적인 면에서 인체의 건강에 적합한지 분석하고자 함이다. 사이즈 코리아를 참고하여 선정한 20대 여성의 평균 사이즈에 해당하는, 인지도 높은 3개 브랜드의 청바지를 시료로 사용하여 4명의 피험자에게 착용하게 한 후, 동작을 변화시키며 변화하는 의복압을 측정하고 주관적 감각 평가를 실시하였다. 첫째, 의복압 측정결과, 엉덩이 최대 돌출 부위가 자세와 상관없이 의복압이 가장 높게 나왔고 무릎 부위 Standing 자세에서 sitting down on the floor 자세로 변할수록 의복압이 높게 나왔다. 둘째, 주관적 감각에 대한 평가 결과는 모든 자세에서 허리벨트 부위가 가장 압박감을 크게 느끼는 것으로 나타났다. 의복압과 주관적 감각의 관계분석에 있어서 스키니 진의 대부분의 부위에서 의복압이 높을수록 압박감을 느끼는 것으로 나타났으나 대퇴부 부위는 의복압이 낮은데도 불구하고 압박감을 크게 느끼는 것으로 나타났다.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2013

The purpose of this paper is to investigate the adequate clothing pressure of upper and lower body foundation garment and subjective assessment of those compressive foundation depending on various wearing conditions. Eighteen women in their 30s and 40s participated in the experiments for this study to evaluate the level of clothing pressure of girdle and waist nipper. Subjects were divided into two groups by the wearing habits of foundation, one is the group of wearing foundation garment 'tightly' and the other is 'loosely', It was found that the group wearing foundation garment 'loosely' was much more sensitive than the group of 'tightly' in everyday life. The adequate pressure of upper foundation, waist nipper was about $1.5{\pm}0.8$ kPa which is lower than that of the lower body foundation, girdle. And at the same time, the sensitivity of the pressure level was higher when subjects are wearing waist nipper compared with wearing girdle. Therefore, precise pattern making process is necessary to meet the adequate level of pressure of the upper body foundation such as waist nipper, specially for those who used to wear clothing loosely.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.183-191
• /
• 2020

In this study, in order to obtain basic data on the development of a new hanbok skirt pattern for developing a customizing system, a new hanbok brand skirt pattern was compared and analyzed. After analyzing the patterns of six new hanbok brands, virtual simulation was performed to evaluate the appearance, clothing pressure, and airgap. As a result of analyzing the waist skirt patterns of commercial new hanbok brands A, B, C, D, E, and F, it was found that they were produced in different dimensions despite the free size skirt of the same design. The pattern of new hanbok waist skirt was composed of a flat pattern like the traditional hanbok. As a result of appearance evaluation, it was evaluated that there were significant differences between the patterns of the six brands in all the evaluation items on the front, side, and back. In the appearance evaluation, it was evaluated that the waist skirt of the B brand was excellent. As a result of examining the color distribution and airgap, it was evaluated that the airgap was large in most parts due to the characteristics of the waist skirt worn around the waist, and the garment pressure was low. In this paper, we propose a basic data for standardizing dimensions and patterns according to activation New Hanbok. It is thought that a unified pattern development based on the B brand pattern should be made.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.201-212
• /
• 2021

This study attempted to compare the pattern with the absorption layer by analyzing the pattern of commercially available urinary incontinence panty products. Through this, it tried to obtain basic data necessary for the development of functional urinary incontinence panty for active seniors. Twelve commercially available products were decomposed to analyze size and patterns, and appearance and clothing pressure were evaluated through 3D simulation. As a result of comparing the size and pattern of urinary incontinence panty, it was analyzed that the size difference between parts was large even though the product was called the same. Products from the same brand also showed a big difference depending on design and absorption. As a result of the appearance evaluation for the 3D simulation, it was found that there were significant differences between products in all items such as the front, side, and back. Product No. 9 was analyzed to be the best except for the waist fit on the side. In the evaluation of clothing pressure, most of them were marked in red except for products 1, 2, and 8 due to the nature of the panty product. In the future, it is thought that actual wearing experiments and size standardization studies on urinary incontinence pants should be conducted.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.55-67
• /
• 2019

This study analyzed the fabric and product size of the burn patient's custom compression garment and measured the pressure applied by the garment to assess whether proper pressure is being delivered for treatment. The test clothes were presented to the market by body size and commissioned with the same design. The subjects selected four people close to the average body size of men in their 20s determined by 7th Size Korea. The experiment was conducted by wearing a compression suit, performing activities and measuring changes in the pressure of the garment according to changes in posture. The fabric used for the compressive clothing was not ruptured even at 216 kPa, the elasticity recovery rate was measured between 80.5 and 94.5%. The product dimensions of the experimental clothing varied by up to 8cm from brand to brand, requiring the standardization of compression clothing. The experiment showed that four types of compression suit varied in pressure, and the pressure range, excluding the gastric arm (17.9mmHg), was between 2.5-14.1mmHg, which failed to meet the level of pressurization for treatment purposes. The clothing pressure in the chest area dropped when performing movements rather than standing still. This was interpreted to be a result of reduced the adhesion of the compression suit during operation. The peak pressure (31.68mmHg) and the lowest pressure (2.2mmHg) was noted in the scapula, indicating that no pressure was being transmitted on the vertebrae. The pressure of the garment on the right shoulder blade was elevated in a supine position. Because much time is spent laying down, it is necessary for the pattern design to accommodate for the increased clothing pressure on the shoulder blades. Standardization of the level of pressurization for burn patient's custom-made pressure suits for each stage of treatment is urgently required.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.485-495
• /
• 2003

This study was to compare and analyze the clothing pressure according to arms movements of 4 brands jacket for middle-aged women group by measuring clothing pressure of each brand. The results were as follows: 1. According to the analysis of jackets of 4 brands, in general, jacket C had the largest ease amount. while jacket A had a large ease amount in waist, hip areas compared with bust area. Also jacket B had a small ease amount in bust, waist areas and jacket D had a small ease amount in hip areas. Therefore the ease amount is different between each brand, each size even though jacket designs are similar. 2. It was found that clothing pressure was affected by arm movements than jackets. Since this study was limited to the arm movement for motion variation, it was recognized that a significant difference among each jacket and each movement at shoulder, waist parts existed with relation to this motion. 3. Parts showing a significant difference among each size were bust point, abdomen point, center back point of abdomen level, angulus superior scapulae point and center back point of waist level. Also clothing pressure of size B91 was bigger than size B88 except Center back point of waist level. 4. Clothing pressure in shoulder point, front armpit point, back armpit point, upper arm point areas increased as the angle of the arms movement increased. Also, individual variation of clothing pressure in front armpit point, back armpit point, armpit point and upper arm point was large, and clothing pressure in abdomen point was high in M5(sitting posture).

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.105-115
• /
• 2015

This study aims to compare the ease of men's single-pleated pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The researchers selected five(four educational materials and one industrial pattern) slim-fit single-pleated pants which is the current fashion trend in menswear. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing, opacity, and clothing pressure. The results showed that D pants had the greatest ease on the waist circumference, while C pants had the least ease. The E pants had the greatest ease on the hip circumference, then B pants and C pants showed less ease. Also, the E pants had the longest on the pants length, then D pants showed the shortest. In the appearance evaluation, A pants received the most favorable results, followed by D, B, E, and C pants, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem in all pants, so the clothing pressure was high. From the results, we can understand that each of the 5 single-pleated pants patterns has different ease amount and silhouette.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.223-237
• /
• 2015

This study is to compare the pattern making methods of men's jeans and to analyze sizes of parts while also evaluating the appearance and fit according to a 3D virtual garment simulation. Five types of patterns are selected for the analysis. For the appearance evaluation, the study conducted a virtual clothing simulation, created a perspective drawing, and applied Clothing pressure to each test outfit. First, according to the pattern comparisons, A and D had the shortest crotch length, while B had the longest; B had the narrowest crotch width, while C had the widest; C had the greatest waist circumference, and B had the smallest; C had the greatest knee and hem circumference, while E had the smallest. Second, according to the appearance evaluation, E pants had the highest rating overall for the waist, crotch, knee, and hem comfort; A pants had the highest rating for the yoke line end and placement; and C pants had the highest rating for the side seam line. According to the correlation analysis, ease of the waist, hips, hem and thighs were important factors (in that order) in determining the overall appearance of the jean pants.

• The Research Journal of the Costume Culture
• /
• v.30 no.2
• /
• pp.226-242
• /
• 2022

For clothing items that combine the top with the bottom, such as a jumper suit, it is necessary to design original forms to develop clothes in various styles that can satisfy aesthetic and functional needs. Therefore, to determine the original forms of women's jumper suits, this study aimed to analyze the patterns of women's jumper suits being sold in the market comparatively and evaluate their fitness. For the study method, this researcher obtained five types of women's jumper suits from local brands and compared the patterns' measured sizes, then conducted exterior evaluation on the surplus according to five different movements and analyzed the values of distortion of clothing pressure comparatively. According to the results, in the basic posture, brands A and C received favorable results, while in the other movements, brand B, which had the biggest surplus on the bottom, was evaluated favorably. In conclusion, in the patterns of women's jumper suits, a bigger surplus is added to either the crotch length or crotch girth rather than the top length, and the top and the bottom tend to have a different surplus according to the design. In addition, based on the values of body surface lengths according to the range of movements, this study suggests that an additional surplus be added to the length.