• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2009년도 춘계학술대회
• /
• pp.161-162
• /
• 2009

최근 국내에서 유행하기 시작한 스키니 진(skinny jean)은 혈액순환 장애, 하복부 장기에 가해지는 압력으로 인하여 소화불량, 변비 또는 생리불순 등 여성 건강을 위협하는 의복 종류이다. 본 연구의 목적은 의복의 쾌적성을 측정할 수 있는 척도인 의복압 검사와 스키니 진의 주관적인 착용감 검사 통하여 의복의 기능적인 면에서 인체의 건강에 적합한지 분석하고자 함이다. 사이즈 코리아를 참고하여 선정한 20대 여성의 평균 사이즈에 해당하는, 인지도 높은 3개 브랜드의 청바지를 시료로 사용하여 4명의 피험자에게 착용하게 한 후, 동작을 변화시키며 변화하는 의복압을 측정하고 주관적 감각 평가를 실시하였다. 첫째, 의복압 측정결과, 엉덩이 최대 돌출 부위가 자세와 상관없이 의복압이 가장 높게 나왔고 무릎 부위 Standing 자세에서 sitting down on the floor 자세로 변할수록 의복압이 높게 나왔다. 둘째, 주관적 감각에 대한 평가 결과는 모든 자세에서 허리벨트 부위가 가장 압박감을 크게 느끼는 것으로 나타났다. 의복압과 주관적 감각의 관계분석에 있어서 스키니 진의 대부분의 부위에서 의복압이 높을수록 압박감을 느끼는 것으로 나타났으나 대퇴부 부위는 의복압이 낮은데도 불구하고 압박감을 크게 느끼는 것으로 나타났다.

• 감성과학
• /
• 제16권1호
• /
• pp.1-10
• /
• 2013

본 연구에서는 인체 상 하체에 대한 적정 의복압값과 평소 착용습관에 따른 주관적 압박감의 차이를 알아보기 위해 30-40대 중년여성을 대상으로 거들과 웨이스트 니퍼를 착용한 후 압력값과 주관적 압박감을 측정하였다. 또한 화운데이션 착용 시 주관적 압박감에 영향을 미치는 제반 요소(자세변화, 착용시간, 심호흡 등)에 대하여 알아보고자 의복압과 주관적 압박감를 측정하고 분석하여 다음과 같은 결론을 얻었다. 적정 의복압의 평균 결과 거들은 $2.1{\pm}0.8$ kPa, 웨이스트 니퍼는 $1.5{\pm}0.8$ kPa로 하체의 적정 평균 의복압이 상체에 비하여 높게 나타났으며, 하체보다는 상체에서 평소 느슨하게 입을수록 압박 수준에 대한 민감도가 컸다. 화운데이션 착용습관 조사를 통해 느슨하게 입는 그룹을 'loosely', 조여입는 그룹을 'tightly'로 분류하여 압력값과 주관적 평가의 상관관계를 살펴본 결과 'loosely' 그룹에서 객관적 압력값과 주관적 평가 간에 또한 주관적 평가와 선호도 간에 상관계수가 더 높게 나타나 평소의 착용습관이 압박감각에 영향을 미침을 알 수 있었다. 자세(선 자세, 앉은 자세)에 따른 압력값의 변화는 웨이스트 니퍼에서만 유의한 차이가 나타나(p=.001), 웨이스트 니퍼 설계 시 적정 의복압을 유지하기 위한 주의를 거들보다 더 기울여야 함을 알 수 있었다. 또한, 시간이 지남에 따라 실제 압력값은 변화가 없었으나 주관적 압박감은 대체적으로 적응을 하여 장기간 착용 시 생리적으로 부정적 영향을 미쳐도 인식하지 못할 수 있음을 알 수 있다.

• 한국컴퓨터정보학회논문지
• /
• 제25권6호
• /
• pp.183-191
• /
• 2020

본 연구에서는 커스터마이징 시스템 개발을 위한 신한복 치마 패턴 개발의 기초자료를 얻기 위해 신한복 브랜드의 치마 패턴을 비교 분석하고자 하였다. 신한복 6개 브랜드의 패턴을 분석하여 가상착의를 시킨 후 외관평가와 의복압 및 공극량을 평가하였다. 시판 신한복 브랜드 A, B, C, D, E, F의 허리치마 패턴을 분석한 결과, 같은 디자인의 free 사이즈 치마임에도 불구하고 각기 다른 치수로 제작되는 것으로 나타났다. 허리치마의 패턴은 기존의 한복과 같이 평면적인 패턴으로 구성되었다. 외관평가 결과 앞면, 옆면, 뒷면 모든 평가항목에서 6개 브랜드의 패턴 간에 유의미한 차이가 있는 것으로 평가되었다. 외관평가 모든 항목에서 B 브랜드의 허리치마가 우수한 것으로 평가되었다. 의복압을 알아보기 위해 색분포도와 공극량을 살펴본 결과, 허리에 둘러서 착용하는 허리치마의 특성상 대부분의 부위에서 공극량이 큰 것으로 나타나 의복압이 낮은 것으로 평가되었다. 본 연구에서는 신한복 활성화에 따른 치수 및 패턴 규격화를 위한 기초자료를 제안하며, B브랜드 패턴을 기본으로 한 통일된 패턴개발이 이루어져야 할 것으로 생각된다.

• 한국컴퓨터정보학회논문지
• /
• 제26권12호
• /
• pp.201-212
• /
• 2021

본 연구는 시판되고 있는 여성 요실금 팬티 제품의 패턴을 분석하여 흡수층과 전체적인 패턴의 형태를 비교해 보고자 하였다. 이를 통해 액티브 시니어를 위한 기능성 요실금 팬티 개발에 필요한 기초자료를 얻고자 하였다. 시판 12개 제품을 분해하여 치수, 패턴 등을 분석하고 3차원 시뮬레이션을 통해 외관, 의복압을 평가하였다. 요실금 팬티의 치수 및 패턴 비교 결과, 같은 호칭의 제품임에도 부위별 치수 차이가 큰 것으로 분석되었다. 같은 브랜드 제품도 디자인 및 흡수량에 따라 큰 차이를 나타냈다. 3차원 시뮬레이션에 대한 외관평가 결과, 앞면, 옆면, 뒷면 등 모든 항목에서 제품 간에 유의미한 차이가 있은 것으로 나타났다. 9번 제품이 옆면의 허리 맞음새를 제외하고 가장 우수한 것으로 분석되었다. 의복압에 대한 평가에서는 팬티 제품의 특성상 1번, 2번, 8번 제품을 제외하고 대부분 붉은색으로 표시되었다. 향후 실제 착의실험 및 요실금 팬티에 대한 사이즈 규격화 연구가 이루어져야 할 것으로 생각된다.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.55-67
• /
• 2019

This study analyzed the fabric and product size of the burn patient's custom compression garment and measured the pressure applied by the garment to assess whether proper pressure is being delivered for treatment. The test clothes were presented to the market by body size and commissioned with the same design. The subjects selected four people close to the average body size of men in their 20s determined by 7th Size Korea. The experiment was conducted by wearing a compression suit, performing activities and measuring changes in the pressure of the garment according to changes in posture. The fabric used for the compressive clothing was not ruptured even at 216 kPa, the elasticity recovery rate was measured between 80.5 and 94.5%. The product dimensions of the experimental clothing varied by up to 8cm from brand to brand, requiring the standardization of compression clothing. The experiment showed that four types of compression suit varied in pressure, and the pressure range, excluding the gastric arm (17.9mmHg), was between 2.5-14.1mmHg, which failed to meet the level of pressurization for treatment purposes. The clothing pressure in the chest area dropped when performing movements rather than standing still. This was interpreted to be a result of reduced the adhesion of the compression suit during operation. The peak pressure (31.68mmHg) and the lowest pressure (2.2mmHg) was noted in the scapula, indicating that no pressure was being transmitted on the vertebrae. The pressure of the garment on the right shoulder blade was elevated in a supine position. Because much time is spent laying down, it is necessary for the pattern design to accommodate for the increased clothing pressure on the shoulder blades. Standardization of the level of pressurization for burn patient's custom-made pressure suits for each stage of treatment is urgently required.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.485-495
• /
• 2003

This study was to compare and analyze the clothing pressure according to arms movements of 4 brands jacket for middle-aged women group by measuring clothing pressure of each brand. The results were as follows: 1. According to the analysis of jackets of 4 brands, in general, jacket C had the largest ease amount. while jacket A had a large ease amount in waist, hip areas compared with bust area. Also jacket B had a small ease amount in bust, waist areas and jacket D had a small ease amount in hip areas. Therefore the ease amount is different between each brand, each size even though jacket designs are similar. 2. It was found that clothing pressure was affected by arm movements than jackets. Since this study was limited to the arm movement for motion variation, it was recognized that a significant difference among each jacket and each movement at shoulder, waist parts existed with relation to this motion. 3. Parts showing a significant difference among each size were bust point, abdomen point, center back point of abdomen level, angulus superior scapulae point and center back point of waist level. Also clothing pressure of size B91 was bigger than size B88 except Center back point of waist level. 4. Clothing pressure in shoulder point, front armpit point, back armpit point, upper arm point areas increased as the angle of the arms movement increased. Also, individual variation of clothing pressure in front armpit point, back armpit point, armpit point and upper arm point was large, and clothing pressure in abdomen point was high in M5(sitting posture).

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• 한국의상디자인학회지
• /
• 제17권1호
• /
• pp.105-115
• /
• 2015

This study aims to compare the ease of men's single-pleated pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The researchers selected five(four educational materials and one industrial pattern) slim-fit single-pleated pants which is the current fashion trend in menswear. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing, opacity, and clothing pressure. The results showed that D pants had the greatest ease on the waist circumference, while C pants had the least ease. The E pants had the greatest ease on the hip circumference, then B pants and C pants showed less ease. Also, the E pants had the longest on the pants length, then D pants showed the shortest. In the appearance evaluation, A pants received the most favorable results, followed by D, B, E, and C pants, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem in all pants, so the clothing pressure was high. From the results, we can understand that each of the 5 single-pleated pants patterns has different ease amount and silhouette.

• 한국의상디자인학회지
• /
• 제17권2호
• /
• pp.223-237
• /
• 2015

This study is to compare the pattern making methods of men's jeans and to analyze sizes of parts while also evaluating the appearance and fit according to a 3D virtual garment simulation. Five types of patterns are selected for the analysis. For the appearance evaluation, the study conducted a virtual clothing simulation, created a perspective drawing, and applied Clothing pressure to each test outfit. First, according to the pattern comparisons, A and D had the shortest crotch length, while B had the longest; B had the narrowest crotch width, while C had the widest; C had the greatest waist circumference, and B had the smallest; C had the greatest knee and hem circumference, while E had the smallest. Second, according to the appearance evaluation, E pants had the highest rating overall for the waist, crotch, knee, and hem comfort; A pants had the highest rating for the yoke line end and placement; and C pants had the highest rating for the side seam line. According to the correlation analysis, ease of the waist, hips, hem and thighs were important factors (in that order) in determining the overall appearance of the jean pants.

• 복식문화연구
• /
• 제30권2호
• /
• pp.226-242
• /
• 2022

For clothing items that combine the top with the bottom, such as a jumper suit, it is necessary to design original forms to develop clothes in various styles that can satisfy aesthetic and functional needs. Therefore, to determine the original forms of women's jumper suits, this study aimed to analyze the patterns of women's jumper suits being sold in the market comparatively and evaluate their fitness. For the study method, this researcher obtained five types of women's jumper suits from local brands and compared the patterns' measured sizes, then conducted exterior evaluation on the surplus according to five different movements and analyzed the values of distortion of clothing pressure comparatively. According to the results, in the basic posture, brands A and C received favorable results, while in the other movements, brand B, which had the biggest surplus on the bottom, was evaluated favorably. In conclusion, in the patterns of women's jumper suits, a bigger surplus is added to either the crotch length or crotch girth rather than the top length, and the top and the bottom tend to have a different surplus according to the design. In addition, based on the values of body surface lengths according to the range of movements, this study suggests that an additional surplus be added to the length.