• Journal of the Korean Graphic Arts Communication Society
• /
• 제12권1호
• /
• pp.29-42
• /
• 1994

• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.609-615
• /
• 2005

$TiO_2$ particles, 30-300 nm in diameter, were prepared by thermal decomposition of titanium tetraisopropoxide (TTIP) using an aerosol microreactor, by which about $1{\mu}l$ of the liquid precursor is injected into an evaporator, 1 cc in volume, and vaporized precursor is then transported by nitrogen as a bolus to a tubular reactor 4 mm in diameter and 35 cm in length. Investigated were the effects of the reactor temperature and the concentration of TTIP vapor on the morphology, particle size distribution and crystalline structure of produced $TiO_2$ particles. With TTIP vapor concentration kept constant at 1 mol%, the reactor temperature was varied from 300 to 500 and $700^{\circ}C$. The primary particle size decreased with increasing the temperature, and the size distributions were mono-modal at 300 and $500^{\circ}C$, but bi-modal at $700^{\circ}C$. The TTIP vapor concentration was increased from 1 to 3.5 and 7 mol%, holding the reactor temperature at $700^{\circ}C$. The bi-modal distribution seen at the concentration of 1 mol% disappeared and the number of particles composing an agglomerate increased at the higher concentrations. These effects of the reactor temperature and the precursor concentration were discussed in comparison with experimental results reported earlier.

• Journal of Life Science
• /
• 제32권9호
• /
• pp.729-733
• /
• 2022

Aggregation of normally soluble proteins can cause disease-related problems. Tryptophan synthase α-subunit (αTS) in E. coli adopts one of most popular structural scaffolds, the TIM barrel fold. Previous mutagenesis of the αTS gene resulted in many aggregation-prone mutant proteins. Here, Y173F (Tyr at residue 173 to Phe) substitution, which imparts increased stability, was tested for its ability to suppress aggregation of aggregation-prone mutant proteins (Y4C, S33L, P28L, P28S, G44S, D46N, P96L, and P96S). Aggregation was suppressed in all eight severe aggregate-forming mutants (all differing in their mutation positions), by the Y173F replacement. P28L αTS, which was available in pure form, was further analyzed and showed reduced secondary structure content, lower stability, and a looser structure with more exposed hydrophobic surface compared to the wild type protein. A double mutant P28L/Y173F protein showed almost no indication of these changes compared to the wild type protein. We hypothesized that Tyr at position 173 in αTS is positioned at the hydrophobic core and may serve to suppress the aggregation of this protein caused by other residues. Important residue (s) could be working widely in the prevention/suppression of protein aggregation.

• Journal of Energy Engineering
• /
• 제23권3호
• /
• pp.17-20
• /
• 2014

A magnetic fluid separation technology was confirmed to be very effective to remove the suspended solids from contaminated water. We have surveyed on the effects of operating variables on the characteristics of suspended solids(SS) removal investigated through the test runs using magnetic powder. Magnetic flocculation here formed by adsorbing fine magnetites on the surface of suspended solid was observed. The strength of magnet was of significance in determining the SS removal efficiency.

• Journal of Korea Water Resources Association
• /
• 제50권11호
• /
• pp.715-723
• /
• 2017

Extracellular Polymeric Substances (EPS) in the water environment assemble fine, colloidal particles, such as clays, microorganisms and biomass, in large flocs, which are eventually subject to sedimentation and deposition and determine water/sediment quality and quantity. This study hence aimed to investigate the way that water and colloidal chemistry affects EPS-mediated flocculation of colloidal particles, using a jar-test experiment. Especially, ionic strength, divalent cation and humic substances concentrations were selected as experimental variables in the jar-test experiments, to elucidate their effects on EPS-mediated flocculation. A higher ionic strength increased flocculation capability, reducing electrostatic repulsion between EPS-attached colloidal particles and enhancing particle aggregation. 0.1 M NaCl ionic strength had higher flocculation capability, with 3 times larger floc size and 2.5 times lower suspended solid concentration, than 0.001 M NaCl. Divalent cations, such as $Ca^{2+}$, built divalent cationic bridges between colloidal particles and EPS (i.e., $colloid-Ca^{2+}-EPS$ or $EPS-Ca^{2+}-EPS$) and hence made colloidal particles to build into large, settelable flocs. A small $Ca^{2+}$ concentration enhanced flocculation capability, reducing suspended solid concentration 20 times lower than the initial dosed concentration. However, humic substances, adsorbed on colloidal particles, reduced flocculation, because they blocked EPS adsorption on colloidal particles and increased negative charges and electrostatic repulsion of colloidal particles. Suspended solid concentration in the tests with humic substances remained as high as the initial dosed concentration, indicating stabilization rather than flocculation. Findings about EPS-mediated flocculation in this research will be used for better understanding the fate and transport of colloidal particles in the water environment and for developing the best management practices for water/sediment quality.

• Polymer(Korea)
• /
• 제28권2호
• /
• pp.111-120
• /
• 2004

The interaction between poly(diallyldimethylammonium chloride) (PDADMAC) of positive charge per repeating unit and anionic surfactant, sodium dodecyl sulfate (SDS) has been investigated by light scattering, turbidimetry and fluorescence. Chain behavior of PDADMAC in 0.3 M NaCl aqueous solution seems like neutral polymer chain In good solvent. By adding SDS into PDADMAC solution, strong attractive interaction develops between them, and can be described with two kinds of critical aggregation concentration(CAC). First, at [SDS]/]DADMAC] 0.06, intramolecular critical micellization of SDS occurs inside a single polymer chain. The maximum size of SDS-polymer complex is observed just before intramolecular CAC. Above intramolecular CAC, the size of this complex starts to shrink slowly due to involvement of polymer subchain in micelle. Second, intermolecular CAC is also observed at [SDS]/[DADMAC] 0.5 by means of turbidimetry. Strong aggregation of polymer chains decorated with many micelles occurs after the second CAC, and huge aggregates have formed.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.27-31
• /
• 1997

액상법에 의한 단분산 ZnS입자의 합성을 60~9$0^{\circ}C$에서 행하여, 반응조건이 ZnS입자의 형태에 미치는 효과를 검토했다. ZnS입자의 형태는 반응 시간의 경과와 더불어 단분산으로부터 다분산 혹은 응집체로 변화하였다. 반응 온도 60~9$0^{\circ}C$에서 초기 농도적이 중간값이고, 반응시간이 짧을 경우 입경 0.2~0.8$\mu\textrm{m}$의 구상 단분산 입자를 얻었다. 또한 Ag$_2$NO$_3$, EtOH용액, $0^{\circ}C$에서, Ag$_2$S에 의한 ZnS의 균일 피복이 가능하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.163-166
• /
• 2001

최적의 사 균제도를 갖는 방적사를 제조하기 위해서는 슬라이버나 조사와 같은 섬유집합체가 어떤 일정 수준의 섬유응집력 및 드래프트 특성을 가져야 하는 것으로 알려져 있다. 드래프트 힘이 어느 정도 올라가면 정적마찰력을 극복한 가속된 섬유와 아직 가속되지 않은 섬유간의 상태가 계속해서 변화하게 되는데, 이와 같이 정적상태에서 동적상태로 전환됨에 따라 사 균제도에도 그에 상응하는 영향을 미치게 된다. (중략)

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 한국결정성장학회 1997년도 Proceedings of the 13th KACG Technical Meeting `97 Industrial Crystallization Symposium(ICS)-Doosan Resort, Chunchon, October 30-31, 1997
• /
• pp.181-186
• /
• 1997

석탄회의 재활용율을 높이고자 비가소성 원료인 석탄회를 첨가한 슬립 및 고형화 소지의 유동학적 고찰을 하였고, 이들을 이용하여 주입성형 후 소성한 시편의 물성들을 측정하였다. 석탄회가 50wt.%이상 대체된 슬립의 경우 해교 기구는 점토내 입자의 정전기적 반발력 보다는 석탄회에 포함된 cenosphere 입자표면의 물유리 흡착에 의한 steric stabilization에 의한 것으로 판단되었다. 응집된 슬립은 전형적인 thixotrophy 현상을 나타내는 반면 분산후 재응집된 슬립은 점도가 계속 증가하는 겔화현상을 나타내어 망목구조를 갖는 성형체를 제조할 수 있었다. 석탄회 대체율 50wt.%의 소성체에서 가장 우수한 물성치를 얻을 수 있었으며, 대체율 70wt.%까지의 주입성형이 가능하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 한국해안해양공학회 2003년도 한국해안해양공학발표논문집
• /
• pp.222-226
• /
• 2003

대부분의 경우에 하구의 미세-점착성 퇴적물은 보통 무기성 광물과 유기물 및 생화학물의 혼합체이며, 광물 입자들은 주로 점토와 실트로 구성되어 있다. 이러한 혼합체의 침식특성은 사질성 퇴적물과는 달리 입자간의 응집현상에 의한 의해 크게 영향을 받으며, 응집강도는 광물질 구성, 입경분포, 유기물 함량 등으로 묘사되는 퇴적물 자체의 물리ㆍ화학적 기본특성에 따라 크게 변화하고 (Mea, 1986), 특히 저면 퇴적물의 침식 여부는 흐름 전단응력에 의한 저면퇴적물의 저항력 즉, 저면전단강도의 상대적 크기의 차이에 좌우되므로, 그 침식 특성은 저면전단강도 흑은 저면밀도로 묘사되는 저면특성에 따라 크게 변화한다(황규남 등, 2003). 또한 각 해역마다 저면 퇴적물은 퇴적물 공급원, 수동학적 조건, 생태학적 조건 등이 모두 다른 상태에서 형성된 퇴적층이므로, 저면 퇴적물의 기본특성 및 저면특성은 "site- specific" 한 성격을 갖는다. (중략)