• Korean Journal of Environmental Agriculture
• /
• v.19 no.1
• /
• pp.13-19
• /
• 2000

Seasonal variations of dominant algae species and the effects of these algae on coagulation and filteration of water treatment were investigated at Chilseo water treatment plant in downstream of Nakdong river from January in 1995 to Desember of 1998. The water quality of Nakdong river was found to be a hyper eutrophic state during the investigation periods. In the measurement, Chlorophyll-a contents ranged $20.7{\sim}180.9{\mu}g/l$ and total nitrogen contents(T-N) and total phosphorus contents(T-P) exceeded more than 3.4mg/l and 0.1mg/l, respectively. The changes in dominant algae species was in the order of Stepanodiscus sp., Asterionella sp., Melosira sp., Microcystis sp. and Synedra sp. from spring to winter. Microcystis sp. especially, was blooming during summer and Synedra sp. and Stepanodiscus sp. during winter. Although most diatomous algae appeared in the water treatment process caused filter clogging and reduced efficiency of coagulation and sedimentation, Synedra sp. and Stepanodiscus sp were revealed as the main trouble algae. Malfunction of water treatment process caused by Synedra sp. and Stepanodiscus sp. started at the algae concentrations of 800cells/ml and 1,820cells/ml, respectively. When chlorophyll-a content was $18.9{\mu}g/l$, the optimum amounts of coagulant were found to be 40mg/l of Alum and 16mg/l of PACS. Under condition of chlorophyll-a content of $154.1{\mu}g/l$, addition of Alum at the level of 75mg/l and PACS at the level of 35mg/l showed the lowest turibidity. The result indicates that increased amounts of the coagulants should be added for a better water treatment as chlorophyll-a contents increased. Addition of Alum at the amount of 60mg/l and 30mg/l of PACS removed Stepanodiscus sp. algae at the rate of 85% and 83%, respectively. In case of Synedra sp., 50mg/l of Alum and 25mg/l of PACS showed removal rates of 79% and 81%, respectively. Synedra sp. algae at the standing crops of 1,500cells/ml started filter clogging and a filtering process was completely inhibited after 8 hours. At this situation the filter clogging by Synedra sp. algae occurred at the depth of 5cm from the top anthracite layer. On the other, other algae did filter clogging at the depth of 10cm.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.3
• /
• pp.505-510
• /
• 2000

In this study the effects of pre-chlorination on the coagulation of water which contain Microcystis aeruginosa. were investigated on the laboratory scale. We prepared the sample of $10^5cell/mL$ Microcystis aeruginosa and then applied 0.2, 1.0, 10 mg-Cl/L chlorine on the sample After reaction period(1 minute and 1 hour), each sample was coagulated. As a result, after 0.4 mg-Al/L coagulant dose, turbidities of all samples were below 2 mg-Kaolin/L. Turbidity was not affected by chlorine dose. As the dose of chlorine was increased, the residual aluminum was decreased, but result of $UV_{254}$ was adverse.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.4
• /
• pp.251-257
• /
• 2014

This research is focused on coagulation and sand filtration process as a pretreatment of RO seawater desalination. RO systems require sufficient and reliable pretreatment process to produce superior quality of RO feedwater that can mitigate RO membrane fouling. This experiment was conducted to investigate the effectiveness of coagulation and filtration process under various experimental conditions including different coagulant dose, flocculation mixing intensity and time, turbidity, and filtration rate. The experimental results showed that the optimum pretreatment conditions resulting in lower SDI value suitable for RO feedwater were coagulation pH 6.5, raw water turbidity greater than 4 NTU, and media bed depth greater than 550 mm. However, flocculation mixing intensity, coagulant dose, and filtration rate relatively affected little on the filtration efficiency.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.6
• /
• pp.411-423
• /
• 2020

To remove phosphorus from the effluent of public wastewater treatment facilities, hundreds of enhanced phosphorus treatment processes have been introduced nationwide. However, these processes have a few problems including excessive maintenance cost and sludge production caused by inappropriate coagulant injection. Therefore, the optimal decision of coagulant dosage and automatic control of coagulant injection are essential. To overcome the drawbacks of conventional phosphorus removal processes, the integrated sedimentation and dissolved air flotation(SeDAF) process has been developed and a demonstration plant(capacity: 100 ㎥/d) has also been installed. In this study, various jar-tests(sedimentation and / or sedimentation·flotation) and multiple regression analyses have been performed. Particularly, we have highlighted the decision-making algorithms of optimal coagulant dosage to improve the applicability of the SeDAF process. As a result, the sedimentation jar-test could be a simple and reliable method for the decision of appropriate coagulant dosage in field condition of the SeDAF process. And, we have found that the SeDAF process can save 30 - 40% of coagulant dosage compared with conventional sedimentation processes to achieve total phosphorus (T-P) concentration below 0.2 mg/L of treated water, and it can also reduce same portion of sludge production.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.2
• /
• pp.82-90
• /
• 2004

This study was conducted to evaluate in situ soil flushing and coagulation for naphtalenes-contaminated soil remediation. Mixed-surfactant of 1% POE12 and 1% SDS (1 : 1 by volume basis) was used as a flushing solution. When 5 pore volumes of mixed -surfactant were added to soil column, the flushing efficiencies of 2-methylnaphtalene and 1,5-dimethylnaphtalene with about 1,500 mg/kg(dry soil) were approximately 80% and 60% respectively. In adding 13 pore volumes of mixed-surfactant, the flushing efficiencies of 2-methylnaphtalene and 1,5-dimethylnaphtalene were 90% and 82%. However, considering in situ soil flushing with distilled water, about 42% and 71% were flushed for 2-methylnaphtalene and 1,5-dimethylnaphtalene by surfactant-only. For about 10,000 mg/kg(dry soil) diesel-contaminated soil, 40% and 70% of TPH were flushed-out in 5 pore volumes and 13 pore volumes addition. However, for naphtalenes in diesel TPH, 90% of flushing efficiency was discovered in adding only 5 pore volumes of flushing solution. There was not discovered significant difference among coagulation efficiencies of 6 kinds of polymers, and the coagulation efficiencies were near 50%.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.12-23
• /
• 2013

On the subject of river bed water in Seomjin river, it had accomplished the verifying experiment of membrane filtration pilot plant for evaluating the applicability of its process throughout the prediction of membrane fouling as a function of the pore size of membrane and the determination of optimum coagulant dosage. On the result of the experiment for the evaluation of the membrane fouling as a function of the pore size, a increasing rate of irreversible resistance of membrane pore size $0.1{\mu}m$ and $0.01{\mu}m$ was measured each $0.44{\times}10^{12}/m^2$ and $0.42{\times}10^{12}/m^2$, respectively. And on the result of Flux-test, it showed that the optimum coagulant dosage was measured lower than the it of the Jar-test. The result to be operated in a condition of a permeate flux $1.0{\sim}1.5m^3/m^2{\cdot}day$ without coagulation and a permeate flux $1.0{\sim}2.0m^3/m^2{\cdot}day$ with coagulation was maintained at stable trans-membrane pressure (TMP) value for 6 months up to. Therefore it showed that the stable operation without the coagulation was possible on permeate flux $1.0{\sim}1.5m^3/m^2{\cdot}day$ in the operation of membrane filtration process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.237-241
• /
• 2012

많은 건설사업장의 경우 토사 유출에 따른 고농도 탁수가 발생하며, 그 탁도를 낮추기 위해 침전지 혹은 토사탈수백 등의 Best Management Practices(BMPs)를 이용한다. 본 연구에서는 유입되는 탁수에 고분자응집제인 polyacrylamide(PAM)를 액상으로 주입하고, 침전지와 토사탈수백을 통해 탁도를 저감하는 field-scale 실험을 수행하였다. 일반적으로 침전지 중간에는 유입되는 물의 힘을 분산시키기 위해 배플이라는 구조물이 설치되는데, 본 연구결과에 따르면 PAM을 통한 화학적 처리 없이 배플 자체로는 탁도를 낮추는 데 그 효과가 낮았으나, PAM주입을 할 경우 배플 설치 여부에 상관없이 90-98%까지 방류수 탁도를 낮출 수 있는 것으로 나타났다. 침사지 이후에 설치한 토사탈수 백은 그 효과가 낮았으나, 침사지 없이 토사탈수백만 사용할 경우 PAM을 이용한 화학적 처리 없이는 만족할 만한 방류수 탁도를 기대하기 어려웠다. 본 연구결과는 향후 미국에서 면적 10에이커 이상의 공사현장에 적용되는 탁도 규제에 대한 대응 방안으로 PAM을 이용한 탁수 처리의 효용성을 보여준다.

• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.471-476
• /
• 2013

The operating conditions of sludge disposal for sanitary paper manufacturing wastewater treatment plant were monitored on the basis of daily check sheets during the 3 years of operation. Generated wastes were mainly composed of 79% of sludge, 14% of ash, 5% of waste synthetic resin and 2% of etc. Maximum sludge was produced to 233 ton and the average was 113 ton daily, where the primary sludge occupied 85% and 15% for the secondary sludge. The concentration of coagulant for sludge dewatering was extremely exceeded and the additional experiment such as jar-test was required for the establishment of proper dosage. Presently, the generated sludges were partially treated outside and were also partly handled inside. In the future, most sludges will be expected to be treated to recycling material for the iron industry.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.45-48
• /
• 2006

혼합유류(등,경유)로 오염된 대상부지의 토양특성을 파악하여 세척공법의 적용성을 판단하고, 적용성시험을 통하여 장치별 설계인자를 도출하였다. 시험결과 본 세척대상토양의 경우 계면활성제와 같은 첨가제를 주입하지 않고 물리적인 탈착공정만을 거쳐도 90%이상의 오염물질이 토양입자표면으로부터 탈착됨을 알 수 있었으며, 이를 반영하여 장치를 제작, 설치하였다. 세척대상 오염토량은 총 $12,225m^3$, 사업수행기간은 약 6개월, 세척장치에 주입된 세척토양의 평균오염농도는 약 3,152ppm 이었으며 세척 완료된 토양의 평균농도는 약 150ppm으로 약 97%의 제거효율을 보여 복원목표인 800ppm을 만족시킬 수 있었다. 그리고, 세척토양의 입도분포를 정확히 파악하고 분리시킬 토양입자 크기를 결정하여 현장 적용한 결과 세척공법으로부터 배출되는 응집슬러지를 최소화할 수 있었으며, 발생되는 세척폐수 또한 세척수 처리시스템을 거쳐 재활용 할 수 있도록 하였다. 이런 결과를 통하여 세척공법이 다른 Ex-situ 공법과 비교하였을 경우 현장의 적용성, 경제성, 복원기간 등을 감안하였을 경우 성공적인 세척공법의 적용사례라 할 수 있다.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.126-135
• /
• 2016

In the present study, we evaluated the efficiency of the drinking water treatment unit processes controlled by targeting high pharmaceutical compounds that are likely to be released into the water supply. In the coagulation process, the removal rate of sulfonamide, an antibiotic, amounted to 22.6~42.1 %, that of naproxen to 28.2 %, and that of acetaminophen to 20 %. Trimethoprim has demonstrated a low removal rate (4.4 %), while the removal rate of erythromycin was 2.4 %; aspirin was not removed at all. When applying a mixture of chlorination and the coagulation process, the removal rate was increased with increasing the chlorine dosage. When the chlorine injection with the concentration of 3 mg/L was applied, sulfonamide antibiotics, acetaminophen and naproxen, were completely removed. Trimethoprim exhibited a high removal efficiency of ca. 98%, while the removal efficiency of erythromycin was about 55 %; at the same time, aspirin showed a lower removal ratio (ca. 10 %). When applying the powdered activated carbon adsorption process, the removal rate was increased with increase of the concentration of the powder activated carbon injection. Sulfonamide antibiotics showed about 18~50 % removal efficiency in the 1 mg/L, the removal rate was increased by at least 80 % in 25 mg/L. The evaluation results of the titration injection concentration of chlorine treatment and adsorption, coagulation process for the efficient processing of the remaining pharmaceutical compounds in the water treatment process, when applying the chlorine 3 mg/L, powdered activated carbon 10 mg/L and coagulant 15 mg/L were removed more than 90 %.