• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.143-150
• /
• 2003

This study deals with the stress-strain-strain rate behaviour of overconsolidated clay. Consolidated-drained stress path tests were performed on the stress-time dependent condition. Stress history consists of rotation angle of stress path, overconsolidation ratio, and magnitude of length of recent stress path. Time history includes loading rate of recent and current stress path. Test results show that all influence factors have an increasing strain rate with time, and the strain rate varies with the change of the rotation angle of stress path. With the increase of overconsolidation ratio and loading rate of current stress path, the strain rate also increases. For the stress history, correlation between stress-strain and strain rate is indicated but the time history is not.

• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.65-82
• /
• 1993

A series of torsion shear tests were performed to study the drained stress -strain behavior of medium dense Santa Monica Beach sand under various stress paths. The torque was applied to both clockwise and counterclockwise directions at the end of hollow cylinder specimen. Two clip gages had been previously used to measure the changes in wall thickness and diameter of the specimen. In this study, however, the lateral strain was determined by measuring volume changes in specimen. Specimens were prepared by the air pluviation method and gaseous carbon deozide( CO2) was used to measure precisely volumetric strain in specimen. The drained stress -strain behavior of cohesionless Boils during rotation of principal stress directions was analysed based on the results of torsion shear tests. The coupling of mal stress were applied. It was also found from the test results that the atrial strain at failure decreased with increasing value.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.867-874
• /
• 2003

섬유보강재를 이용한 성토제체의 설계에서 기존의 방법은 보강재의 변형을 무시하고 흙의 변형만을 중요시하고 있다. 보강재에 의해 보강된 성토제체의 파괴면에서 보강재와 흙의 거동은 초기응력단계에서는 일체거동현상을 나타내지만 응력의 증가에 따라 변형량에서 차이를 보인다. 이러한 문제는 토공구조물의 보강재를 설계하는데 있어서 중요한 요소로서 보강효과에 큰 영향을 미칠 수 있다. 본 연구에서는 연약지반 위에 PET Mat로 보강하여 축조한 성토제체에서 보강재와 흙의 응력 - 변형거동을 수치해석을 통하여 분석하였다. 연구결과, 파괴면에서 보강재의 변형은 보강재의 인장강도 크기에 따라 큰 차이를 보이고 있다. 외부하중에 의해 보강재에 발생하는 최대응력은 보강재의 항복인장강도를 초과하지 않으며, 보강재에 발생하는 응력이 성토체에서 발생하는 응력이상일 때 이상적인 것으로 나타났다. 또한 제체의 전단파괴에 대한 안전율은 보강재의 항복인장강도가 증가할수록 증가하는데 보강재와 흙의 변형이 일치되는 이후부터는 안전율의 증가율은 거의 미미한 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.53-62
• /
• 2008

A constitutive model, which can simulate the effect of principal stress rotation associated with direct simple shear test, is proposed in this study. The model is based on two mobilized planes. The plastic strains occur from the two mobilized planes, and depend on stress state, and they are added. The first plane is a plane of maximum shear stress, which rotates about the horizontal axis, and the second plane is a horizontal plane which is spatially fixed. The second plane is used to consider the effect of principal stress rotation on simple shear tests under different stress states. The soil skeleton behavior observed in drained simple shear tests is captured in the model. This constitutive model is incorporated into the dynamic coupled stress-flow finite difference program FLAC. The model is first calibrated with drained simple shear tests on loose Fraser River sand. The measured shear stress and volume change are partially induced by principal stress rotation and compared with model calculations. The model is verified by comparing predicted and measured settlements due to rigid footing resting on loose sands. Settlements predicted by the proposed model were very similar to measured settlements. Mohr-Coulomb model can not consider the effect of principal stress rotation and its prediction was only 20% of measured settlements.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.5
• /
• pp.197-206
• /
• 1997

본 연구에서는 기존의 초고강도 콘크리트에 대한 실험자료를 근거로 합리적인 통계적 기법을 이용하여 초고강도 콘크리트의 설계 실용화를 위한 응력-변형율 관계 모델과 응력분포 모델을 제안하는 것이 목적이다. 이를 위하여 첫째, 콘크리트의 응력-변형율 특성을 결정하는 재료 변수들(탄성계수, 최대 압축강도시 변형율 등)에 대한 검토를 수행하였다. 둘째, 이를 바탕으로 일반성과 정확성을 동시에 갖춘 초고강도 콘크리트(700~1400kg/$\textrm{cm}^2$)에 적합한 응력-변형율 모델을 제안, 비교, 고찰하엿다. 셋째, 제안된 응력-형율 모델로부터 초고강도 콘크리트 구조의 극한강도를 평가하기에 적합한 응력분포모델을 제안, 일반성과 정확성을 비교 검증하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4C
• /
• pp.175-182
• /
• 2009

The stress-strain relationship of an unsaturated soil was analyzed by Bishop stress descriptions in this study. The failure criteria could be defined uniquely by the Bishop stress and were also independent of matric suctions. In the low level of matric suctions the failure criteria have a linear relationship and the estimated criterion fitted the measured accurately. Deformation moduli in the small strain level were linearly increased generally with respect to Bishop stress.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.726-732
• /
• 1998

가압 경수로형 원전에 사용되는 Alloy 600 증기발생기 전열관재료의 입계응력부식균열 거동에 미치는 냉간변형의 영향을 1차 냉각수 모사조건에서 정속인장시험방법으로 조사하였다. 인장 냉간변형은 응력부식균열을 크게 가속화 시키지는 않았으며 변형량이 25%이상인 경우에는 응력부식균열이 발생하지 않았다. 이 현상은 냉간 변형량 및 형태에 따른 미소변형 및 응력의 불균질성에 영향을 받는 것으로 사려되며 응력의 크기는 직접적인 영향을 주지 않는 것으로 보인다. 국부적인 큰 응력구배가 존재하는 경우 균열의생성 및 성장이 현저히 가속화되었는데 이는 원전 1차측 응력부식균열 기구가 응력구배에 의존하는 과정과 연관되어 있다는 증거이다. Hump 시편을 이용한 정속인장시험방법은 짧은 실험기간내에 원전 1차측 응력부식균열 특성을 평가할 수 있는 방법이었다.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.219-234
• /
• 1998

Modulus measurements in vertical boreholes under simulated horizontal in-situ stress conditions were performed on laboratory rock specimens. The experimental program was focused on the examination of modulus change with the variation of the orientation, magnitude and ratios of horizontal biaxial stresses. The experiment results show that the modulus increases when the magnitude of the horizontal stresses increases. The modulus measured in the minimum principal direction increased when the ratio between the horizontal principal stresses increased, while the modulus measured in the maximum principal direction decreased when the ratio of the horizontal principal stresses increased. These were caused by the tangential stresses that vary depending upon the magnitude of horizontal stresses, the applied pressure and the orientation of measurement. Also, the measured moduli were determined under tensile stress, compressive stress, or both stresses. Thus, the stress effect on deformation modulus should be considered, not only for the interpretation of the results of borehole deformability measurement, but also for the design of underground gas storage and pressure tunnel, and for the interpretation of tunnel monitoring.

• Geotechnical Engineering
• /
• v.5 no.2
• /
• pp.45-56
• /
• 1989

The influence of stress path on the deformation characteristics of clay has been studied through a series of stress-path controlled triaxial tests on artificially sedimented and normally con- solidated Kaolinite. It has been found that there exists a critical stress increment ratio, Kc, in which stress·strain characteristics possesses a linear relationships and beyond Kc, strain hardening. A modified hyperbolic constitutive model for the strain hardening behavior has been formulated based on the Drnevich's hyperbolic function. And, a method of settlement analyses has been Proposed wherein the effect of stress path during consolidation is taken into account.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.608-610
• /
• 2011

본 논문에서는 자동차의 도어의 충격봉의 형상에 따른 변형률과 최대응력을 ANSYS Workbench환경을 이용해 원형, 반원형, 모자형 개단면, 정사각형 등의 단면 형상에 따른 변형량 특성을 측정해 본 결과 변형률은 모자형 개단면 모델이 가장 적은 변형률을 가지는 것으로 나왔으며, 무게가 30%정도 적게 나가는 반원형도 두 번째로 적은 변형률을 가지는 것으로 나타났다. 최대응력의 경우는 반원형이 가장 적은 최대응력 값을 가지는 것으로 나왔고, 변형률과는 다르게 중심부 보다는 충격봉과 프레임의 연결부위에서 최대응력이 발생하는 것을 알 수 있었다. 이를 통해서 충격봉의 중심부는 변형률 및 응력이 다른 부분에 비해서 크게 작용하므로, 중앙부위의 단면계수가 높아야 한다.