• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.363-371
• /
• 2023

To construct a ship, blocks of various sizes must be moved and erected . In this process, lugs are used such that they match the block fastening method and various functions suitable for the characteristics of each shipyard facility. The sizes and shapes of the lugs vary depending on the weight and shape of the block structures. The structure is reinforced by welding the doubling pads to compensate for insufficient rigidity around the holes where the shackle is fastened. As for the method of designing lugs according to lifting loading conditions, a simple calculation based on the beam theory and structural analysis using numerical modeling are performed. In the case of the analytical method, a standardized evaluation method must be established because results may differ depending on the type of element and modeling method. The application of this ambiguous methodology may cause serious safety problems during the process of moving and turning-over blocks. In this study , the effects of various parameters are compared and analyzed through numerical structural analysis to determine the modeling conditions and evaluation method that can evaluate the actual structural response of the lug. The modeling technique that represents the plate part and weld bead around the lug hole provides the most realistic behavior results. The modeling results with the same conditions as those of the actual lug where only the weld bead is connected to the main body of the lug, showed a lower ulimated strength compared with the results obtained by applying the MPC load. The two-dimensional shell element is applied to reduce the modeling and analysis time, and a safety working load was verified to be predicted by reducing the thickness of the doubling pad by 85%. The results of the effects of various parameters reviewed in the study are expected to be used as good reference data for the lug design and safe working load prediction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.4
• /
• pp.610-618
• /
• 2015

The purpose of this study was to analyze differences in emotional labor strategies, burnout, and work engagement according to general characteristics of school foodservice employees as well as verify differential effects of two emotional labor strategies on burnout and work engagement. Our survey was administered to 400 school foodservice employees in Gyeongbuk from March 3 to April 25, 2014. A total of 358 completed questionnaires were returned, and 350 questionnaires were used for final analysis. For verification of mean differences, the mean scores for surface acting, deep acting, burnout, and work engagement were shown to be 2.38/5.00, 3.46, 2.67, and 3.41, respectively. The mean surface acting was significantly different according to cooking certification (P<0.001), turnover number (P<0.001), salary (P<0.001), and school level (P<0.01). The mean deep acting was significantly different according to educational background (P<0.001), cooking certification (P<0.001), employment status (P<0.001), salary (P<0.001), school level (P<0.01), and meal service time (P<0.05). The mean burnout was significantly different according to educational background (P<0.01), cooking certification (P<0.05), employment status (P<0.001), school level (P<0.001), and meal service time (P<0.001). The mean work engagement was significantly different according to cooking certification (P<0.001), employment satus (P<0.001), salary (P<0.001), school level (P<0.01), and meal service time (P<0.05). Verification of causal models found that surface acting and deep acting increased burnout and deep acting, respectively (research model). Additionally, surface acting did not influence work engagement, and deep acting did not influence burnout (alternative models). In other words, we identified that emotional labor strategies have differential influences on burnout and work engagement. Finally, implications and limitations of this study are discussed.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.1
• /
• pp.25-43
• /
• 1997

Introduction : The outcome and incidence of acute respiratory distress syndrome (ARDS) could be variable related to the varied definitions used for ARDS by researchers. The purpose of the national survey was to define the risk factors of ARDS and investigate the prognostic indicies related to mortality of ARDS in Korea according to the definition of ARDS determined by the American-European Concensus Conference on 1992 year. Methods : A Multicenter registry of 48 University or University-affliated hospital and 18 general hospital s equipped with more than 400 patient's beds conducted over 13 months of patients with acute respiratory distress syndrome using the same registry protocol. Results : 1. In the 12 months of the registry, 167 patients were enrolled at the 24 hospitals. 2. The mean age was 56.5 years (${\pm}17.2$ years) and there was a 1.9:1 ratio of males to females. 3. Sepsis was the most common risk factors (78.1%), followed by aspiration (16.6%), trauma (11.6%), and shock (8.5%). 4 The overall mortality rate was 71.9%. The mean duration was 11 days (${\pm}13.1$ days) from the diagnosis of ARDS to the death. Respiratory insufficiency appeared to be a major cause in 43.7% of the deaths followed by sepsis (36.1%), heart failure (7.6%) and hepatic failure (6.7%). 5. There were no significant differences in mortality based on sex or age. No significant difference in mortality in infectious versus noninfectious causes of ARDS was found. 6. There were significant differences in the pulse rate, platelet numbers, serum albumin and glucose levels, the amounts of 24 hour urine, arterial pH, $Pa0_2$, $PaCO_2$, $Sa0_2$, alveolar-arterial oxygen differences, $PaO_2/FIO_2$, and PEEP/$FI0_2$ between the survivors and the deaths on study days 1 through 6 of the first week after enrollment. 7. The survivors had significantly less organ failure and lower APACHE III scores at the time of diagnosis of ARDS (P<0.05). 8. The numbers of organ failure (odd ratio 1.95, 95% confidence intervals:1.05-3.61, P=0.03) and the score of APACHE III (odd ratio 1.59, 95% confidence interval:1.01-2.50, P=0.04) appeared to be independent risk factors of the mortality in the patients with ARDS. Conclusions : The mortality was 71.9% of total 167 patients in this investigation using the definition of American-European Consensus Conference on 1992 year, and the respiratory insufficiency was the leading cause of the death. In addition, the numbers of organ failure and the score of APACHE III at the time of diagnosis of ARDS appeared to be independent risk factors of the mortality in the patients with ARDS.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.1
• /
• pp.11-19
• /
• 2004

To investigate the effect of eating habits and lifestyle on the food intake of university students in Daejeon, 104 male students(26.75％) and 282 female students(73.75％) were surveyed about their food intake, eating habits, and lifestyle using the questionnaire. The major food served as breakfast was steamed rice(76.05％) and there was a little significant difference between male and female. The major food served as lunch was also steamed rice(73.77％) and male students ate it more than female ones. According to the survey, 41.95％ of the subjects had breakfast regularly, and 24.35％ seldom, which showed no significant difference between male and female. In case of lunch, the percentile of subjects(54.55％) who had regularly eaten lunch was more than that of breakfast, and there was a little significant difference between male and female. The survey said most subjects(49.22％) had eaten dinner irregularly, which rate was higher in male students. The meal skipped usually was the breakfast(24.35％), which rate was higher in female students. The reason why the subjects skipped the meal was mainly due to the lack of sufficient time for breakfast and lunch, and for dinner to the weight loss. Among the subjects, 80％ said they were non-smokers; 96.44％ in female students and 35.58％ in male ones. In case of drinking, most subjects said they sometimes drank(67.19％) and the frequency of drinking was once or twice a month(51.99％), which showed the significant difference between male and female. In the aspects of effects of drinking and smoking on the food intake, the drinking practice after eating was shown to be the highest(55.98％); smoking generally affected the food intake, which showed the difference between male and female. Food intake during the examination period didn't show any differences to the usual one or increased a little bit, which showed a difference between male and female. Losing appetite during the examination period was shown mainly in the female students. When they felt blue or tired, the food intake decreased, which showed a significant difference between male and female was shown. When feeling good, the food intake significantly increased, which showed a significant difference between male and female. Therefore, there was a significant difference between male and female in the actual eating habits and in the aspects of food intake.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.6
• /
• pp.861-869
• /
• 2012

This study was conducted to investigate the purchasing status and to compare supplier performance evaluations between competitive bidding and negotiated contracts in school foodservice in Changwon, Korea. A total of 190 questionnaires were distributed and 167 (return rate 87.9%) were collected from June 29 to September 28, 2010, and then a total of 151 (analysis rate 79.5%) were used for the final analysis. First, 91.4% of food product purchases for school meals were contracted through competitive bidding, especially limited competitive bidding. It mainly consisted of agricultural products, processed food, and eco-friendly agricultural products (fruit). Second, 78.8% of schools purchased food products by negotiated contracts, while single negotiation accounted for 59.7%. Food products by negotiated contract consisted of meat, kimchi, and fish. Third, the purchase status of competitive bidding and negotiated contracts showed a significant difference in agricultural products (p<0.001), fish (p<0.001), meats (p<0.001), poultry (p<0.001), antibiotic-free poultry (p<0.001), eco-friendly grain (p<0.001), eco-friendly agricultural products (fruit) (p<0.001), eco-friendly processed food (p<0.001), processed products (p<0.001), milk (p<0.001) and general grain (p<0.001) except for kimchi. Fourth, comparative analysis of supplier performance evaluation (on a 5-point Likert scale) of school foodservice showed that price of product of competitive bidding (3.73) was significantly higher than that of negotiated contract (2.95) (p<0.001), and the overall performance level of the negotiated contract (3.85) was significantly higher than that of competitive bidding (3.61) (p<0.01). The supplier performance evaluation levels of product packaging (p<0.01), product quality at the time of delivery (p<0.001), hygiene of products (p<0.001), consistency to specification (p<0.001), swiftness of return and exchange (p<0.001), emergency delivery (p<0.001), service of delivery staff (p<0.05), and handling of complaints (p<0.001) of negotiated contracts were significantly higher than those of competitive bidding of school foodservice. In conclusion, school foodservice selected food suppliers both by adopting competitive bidding and negotiated contracts. And there was a significant difference of school foodservice supplier performance between competitive bidding and negotiated contracts in Changwon, Korea.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.109-120
• /
• 2010

The purpose of this study was first to analyze the utilization of dental examination through questionnaire to develop a diagnostic reference level of patient doses for dental radiography in korea. 77 dental institutions were classified into three groups: A group for the dental hospitals of the college of dentistry (11 institutions), B group for dental hospitals (30 institutions) and C group for dental clinics (36 institutions). The results were as follows : The mean numbers of unit chairs and medical staffs were 140.2, 15.3 and 5.8 sets, 112.6, 7.3 and 1.7 dentists, 3.1, 0.5 and no one radiologic technologists, and 19.7, 12.5 and 3.3 dental hygienists in A, B and C groups, respectively. The mean numbers of dental X-ray equipments were 14.64, 3.21 and 2.19 in A, B and C groups, respectively. Intraoral dental X-ray unit was used the most, the following equipments were panoramic, cephalometric, and cone-beam CT units. The most used X-ray imaging system was also digital system (above 50%) in all three groups. Insight dental film (Kodak, USA) having high sensitivity was routinely used for periapical radiography. The automatic processor was not used in many dental institutions, but the film-holding device was used in many dental institutions. The utilization rates of PACS in A, B and C groups were 90.9%, 83.3% and 16.7% respectively, and the PACS software program was used the most PiView STAR (Infinitt, Korea). The annual mean number of radiographic cases in one dental institution in 2008 for A group was 6.8 times and 21.2 times more than those for B and C groups, and periapical and panoramic radiographs were taken mostly. Tube voltage (kVp) and tube current (mA) for periapical radiography were similar in all three groups, but exposure time in C group was 12.0 times and 3.5 times longer than those in B and C groups. The amount of radiation exposure in C group, in which dental hygienists take dental radiographs, was more than those in other groups. The exposure parameters for panoramic radiography were similar in all three groups. In conclusion, the exposure parameters in dental radiography should be determined with reference level, not past experiences. Use of automatic processor and film-holding devices reduces the radiation exposure in film system. The quality assurance of dental equipments are necessary for the reduction of the patient dose and the improvement of X-ray image quality.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.4 s.55
• /
• pp.785-799
• /
• 1996

We investigated the 1,004 workers who worked in a automobile factory to study the epidemiologic characterists of dermatoses due to cutting oils. Among the workers, 667(66.4%) answered the questionaire. They are belong to 5 departments of the factory-the Engine-Work(258 workers), Gasoline engine Assembly(210), Diesel engine Assembly(96), Power train Work(86), Power train Assembly(17). We measured the oil mist concentration in air of the departments and examined the workers who had dermatologic symptoms. The results were follows; 1) Oil mist concentration ; Of all measured points(52),9 points(17.2%) exeeded $5mg/m^3$- the time-weighed PEL-and one department had a upper confidence limit(95%) higher than $5mg/m^3$. 2) Dermatologists examined 213 workers. 172 of them complained any skin symptoms at that time - itching(32.5%), papule(21.6%), scale(15.7%), vesicle(12.5%) in order. The abnormal skin site found by dermatologist were palm(29.3%), finger & nail(24.6%), forearm(16.2%), back of hand(8.4%) in order. 3) As the result of physical examination, we found that 160 workers had skin diseases. Contact dermatitis was the most common; 69 workers had contact dermatitis alone(43.1%), 11 had contact dermatitis with acne(6.9%), 10 had contact dermatitis with folliculitis(6.3%), 1 had contact dermatitis with acne & folliculitis, and 1 had contact dermatitis with abnormal pigmentation. Others were folliculitis(9 workers, 5.6%), acne(8, 5.0%), folliculitis & acne (2, 1.2%), keratosis(1, 0.6%), abnormal pigmentation (1, 0.6%), and non-specific hand eczema (47, 29.3%). 4) The prevalence of any skin diseases was 34.0 pet 100 in cutting oil users, and 13.3 per 100 in non- users. Especially, the prevalence of contact dermatitis was 23.0 per 100 in cutting oil users and 23.0 per 100 in non-users. 5) We tried patch test(standard serise, oil serise, organic solvents) on 49 patients to differentiate allergic contact dermatitis from irritant contact dermatitis and found 20 were positive. 6) In a multivariate analysis(independant=age, tenure, kinds of cutting oil), the risk of skin diseases was higher in the water-based cutting oil user and both oil user than non-user or neat oil user(odds ratio were 2.16 and 2.78, respectively). And the risk of contact dermatitis was much higher at the same groups(odds ratio were 5.16 and 6.82, respectively).