• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.9-16
• /
• 2011

When a hydrofoil ship plies at high speed, there exist possibilities of collision with ocean mammals dwelling near the surface. An active sonar located within the immersed hydrofoil structure that provides the lift for the vessel, can be used for early warning of their presence. The proper functioning of the active sonar system depends on its ability to reject noise and pick up the target signal. In this article, we measured the noise on a hydrofoil of an operating ship with two flush-mounted hydrophones. The measurements were conducted for the purpose of (1) identifying the effect of operating state of machinery likes engine, cooler and generator (2) observing the change of noise depending on the measuring position (3) observing the change of noise with increasing ship speed. To verify our experiment, experiments were performed three times and the measured results are compared with other investigations and they show similarity to each other. The results are analyzed with frequency domain in order to apply to operating active sonar detecting system and focus on high frequency band within sonar's operating frequency region. Through these experiments and analysis, it is expected that we can identify the generated noise around hydrofoil where active sonar is installed and these results lead us to design active sonar that could distinguish target signal from noise more effectively.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.1-8
• /
• 2024

For measuring the performance of passive sonars, we usually consider the maximum Detection Range (DR) under the environment and system parameters in operation. In shallow water, where sound waves inevitably interacts with sea surface or bottom, detection generally maintains up to the maximum range. In deep water, however, sound waves may not interact with sea surface or/and bottom, and thus there may exist shadow zones where sound waves can hardly reach. In this situation, DR alone may not completely define the performance of each sonar. For complete description of sonar performance, we employ the concept 'Robustness Of Detection (ROD)'. In the coastal region of the East Sea, the spatial variations of water masses have close relations with DR and ROD, where the two parameters show reverse spatial variations in general. The spatial and temporal analysis of the temperature by employing the Empirical Orthogonal Function (EOF) shows that the 1-st mode represents typical pattern of seasonal variation and the 2-nd mode represents strength variations of mixed layers and currents. The two modes are estimated to explain about 92 % of the variations. Assuming two types of targets located at the depths of 5 m (shallow) and 100 m (deep), the passive sonar performance (DR) gives high negative correlations (about -0.9) with the first two modes. Most of temporal variations of temperature occur from the surface up to 200 m in the water column so that when we assume a target at 100 m, we can expect detection performance of little seasonal variations with passive sonars below 100 m.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.64-70
• /
• 2005

Target Strength(TS) is an important factor for the detection of the target in an active sonar system: thus the numerical model for the prediction of TS is widely being developed. For the frequency range of several kHz, the most important scattering mechanism is known to be specular reflection, which is largely affected by the geometrical shape of the target. In this paper, a numerical algorithm to predict TS is developed based on the Kirchhoff approximation which is computationally efficient. The developed algorithm is applied to the canonical targets of simple shapes, for which the analytical solutions exist. The numerical results show good agreement with the analytical solutions. Also, the algorithm is applied to more complex scatterers, and is compared with the experimental data obtained in the water tank experiment for the purpose of verifying the developed numerical model. Discussions on the effect of spatial sampling and other aspects of numerical m odeling are presented.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.317-328
• /
• 2013

In this paper, the optimization has been performed to design a multi-layer structure that is used as a structure for noise reduction of acoustic sonar sensors in underwater vehicles. Two design goals are considered to reduce self-noise from own machineries and to enhance acoustic signals detected from outside. Both distinct and continuous design parameters have been used such as selection of material properties of each layer and thickness of each layer, respectively. The sensitivity of design parameters has been analyzed and the evolutionary algorithm has been implemented for design optimization. For design optimization process, each of the design goals and the two combined design goals have been considered to analyze the achievement of those design goals.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.314-323
• /
• 2024

Recently, a score-penalty method has been used for the acoustic passive tracking of marine mammals. The interesting aspect of this technique lies in the loss function, which has a penalty term representing the mismatch between the measured signal and the modeled signal, while the traditional time-domain matched-field processing is positively considering the match between them. In this study, we apply the score-penalty method into the depth estimation of a passive target with a known source waveform. Assuming deep ocean environments with uncertainties in the sound speed profile, we evaluate the score-penalty method, comparing it with the time-domain matched field processing method. We shows that the score-penalty method is more accurate than the time-domain matched field processing method in the ocean environment with weak mismatch of sound speed profile, and has better efficiency. However, in the ocean enviroment with strong mismatch of the sound speed profile, the score-penalty method also fails in the depth estimation of a target, similar to the time-domain matched-field processing method.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.100-107
• /
• 2017

The focused MVDR (Minimum Variance Distortionless Response) can be applied for source localization in near field. However, if the number of sensors are increased, it requires a large amount of calculation to obtain the inverse of the covariance matrix. In this paper we propose a focused MVDR method using that beam space is formed from output of far field beamformer at the subarray. The performances of the proposed method was evaluated by simulation. As a result of simulation, the proposed method has the higher spatial resolution performance then the conventional delay-and-sum beamformer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.812-819
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. This research provides the time pattern of TS in time domain, which is applicable to pulse modulated acoustic pressure field. If the time pattern of TS is predicted by using TS equation in frequency domain, it takes long time and difficult since time function pulsed acoustic wave may be decomposed into their frequency domain components. But TS equation in time domain has a convenience. If the expression for pulsed acoustic field has been obtained, the problem can be solved. Furthermore this paper introduces about mathematical equivalence quantities between EM wave and Acoustic Wave.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.629-636
• /
• 2003

It will be very convenient if the directivity characteristics of ultrasonic transducer array are controllable by the purpose of use in the fields of sonar system or ultrasonic diagnostic system, In this paper, a control method of the directivity characteristics was suggested. The transducer array was consisted of two-layered piezoelectric vibrators. Efficiency of each vibrator is controlled in 2nd harmonic mode by electrical capacitance. Therefore, the beam width of the transducer array can be controlled by changing the capacitance. The directivity characteristics of the array were analyzed experimentally and theoretically. As the results, it is confirmed that -3 dB beam width of main lobe can be controlled in the range of 7.6°∼16.2°.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.58-66
• /
• 2001

In this paper, a computationally efficient time delay and doppler estimation algorithm is proposed for active sonar with Linear Frequency Modulated (LFM) signal. To reduce the computational burden of the conventional estimation algorithm, an algebraic equation is used which represents the relationship between the time delay and doppler in cross-ambiguity function of the LFM signal. The algebraic equation is derived based on the Fast maximum Likelihood (FML) method. Using this algebraic relation, the time delay and doppler are estimated with two 1-D search instead of the conventional 2-D search. The estimation errors of the proposed algorithm are analyzed for various SNR's. The simulation result demonstrates the good performance of the proposed algorithm.