• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.361-368
• /
• 2013

As one way to describe the behavior of a vibrating string, analogies to a transmission line have been made based on the fact that they have oppositely travelling waves on each of them. In such analogies, a rigid end to the string has been represented as an open circuit, and the displacement of the string as the current on the transmission line. However it turns out that the rigid end corresponds to a short circuit, the displacement to the voltage by the theory of the transmission line, and it is confirmed by experiments with circuit simulations. Based on these discoveries, a transmission line based plucked string model comprising a transmission line, two piecewise linear current sources, and switches is proposed. The proposed model is validated by showing that the voltage at the arbitrarily chosen location, and the voltage calculated over an infinitesimal portion at the end of the transmission line are consistent with the displacement at the corresponding location and the force on the rigid end of the string from the well known difference form of a wave equation governing the behavior of the string with its fundamental frequency tuned to that for the proposed model, respectively. Moreover, the applicability of the proposed model to modeling string and wind instruments is presented.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.153-156
• /
• 2004

Spatial Audio Coding (SAC)은 낮은 대역폭에서 다채널/다객체 오디오 신호를 전송하기 위해 제안된 기술이다. 본 논문에서는 MPEG 에서 SAC 기술의 평가 방법으로 채택된 Multi-Stimulus test with Hidden Reference and Anchor (MUSHRA) 실험 절차에 대해서 설명한다. 또한 제 69 차 MPEG 회의에서 제안된 4 개 기관의 SAC 기술에 대한 청취실험을 수행하고 그 결과를 분석한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.2
• /
• pp.167-175
• /
• 2013

The wave propagation characteristics of an acoustic metamaterial composed of periodically repeated one-dimensional Helmholtz resonator array was investigated considering the effects of dimensional changes of the resonator geometry on the transmission coefficient and band gap. The effective impedance and transmission coefficient of the acoustic metamaterials are obtained based on the acoustic transmission line method. The designed acoustic metamaterials exhibit band gaps and negative bulk modulus that are non-existent properties in the nature. The band gap of the acoustic metamaterial is strongly dependent on the geometry parameters of Helmholtz resonators and lattice spacing. Also, a new type of metamaterial that is periodically constructed with two different resonators was designed to open the local resonance band gap without change of Bragg scattering.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.270-277
• /
• 2021

In the power ultrasound fields, the flange position for fixing the transducer is an important factor influencing on electro-mechanical efficiency of the transducer. We suggested a practical method that can determine the installation position of the flange for different resonance modes of the bolt-clamped type Langevin ultrasonic transducer. A semicircular wedge-shaped jig was manufactured and moved along the lateral surface of the transducer. The vibration characteristics were examined after a constant pressure was applied to the semicircular wedge-shaped jig. By observing the change of the input admittance of the transducer depending on the position of the pressure application, the optimum position for the flange installation could be determined. The resonant modes of the transducer were calculated by a Mason's equivalent circuit, and the particle velocity distribution for each resonance mode was calculated by a transmission line model. Since the optimum positions determined from an experimental result show a good correspondence with the node positions of the vibration modes calculated by the transmission line model, the validity of the suggested method was verified.

• Journal of Korea Game Society
• /
• v.7 no.1
• /
• pp.53-58
• /
• 2007

In this paper, a game control system was constructed, in which a game was controlled by a remote joystick connected with a power line by the power line communication (PLC) method. The structure of the system was that the connection line between the remote joystick and a PC, and the PC and an audio play device was the home power line. And, the communication data rate between them was 2400 bps. The Polling communication technique was used for the PC to read the joystick's control commands, and to send some acoustic informations to the receiver PLC device. A game was programmed, in which an aircraft was moved according to the joystick's left, right, up, and, down direction, and was shooting its missile after the joystick's shooting button was pushed. The communication delay of about 100 msec between them didn't cause any big problem in playing the game.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.417-427
• /
• 2021

Long-range communication in deep waters must overcome the low data rate due to limited bandwidth. This paper presents the performance of Multiple-Input-Multiple-Output (MIMO) system to increase the data rate. In MIMO system, communication performance is degraded by crosstalk between users and an adaptive passive Time Reversal Processing (TRP) is widely used to eliminate this. In October 2018, long-range underwater acoustic communication experiment was conducted in deep water (1,000 m ~) off the east of Pohang, South Korea. During the experiment, a vertical line array was utilized and communication signals modulated by binary phase shift keying and quadrature phase shift keying with a symbol rate of 512 sps were transmitted. To generate MIMO communication signals, received signals from ranges of 26 km and 30 km is synthesized. Compared to the conventional passive TRP, the adaptive passive TRP eliminates the crosstalk between users and achieves error-free performance with an increase of output signal-to-noise ratio. Therefore, two users separated by 4 km in range achieves an aggregate data rate of 1,024 symbols/s.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.166-171
• /
• 2000

밀티빔 음향 측심기 (Multibeam Echo Sounder)는 탐사선에 수직방향으로 해저면을 주사(Swath)하여, 한번의 송수신(Ping)으로 다중의 빔자료를 얻을 수 있는 측심기로, 해저면에 반사되어 되돌아오는 음파의 음압을 기록하고, 사이드 스캔 소나 자료도 동시에 취득하는 기능을 가지고 있으므로, 측심된 해저 지형(Bathymetry)과 해저 지형을 덮고 있는 해저면의 퇴적 상황(Sediment Environment)도 동시에 얻을 수 있는 다목적 측심기이다. 본 논문에서는 L3사의 Sea Beam 2100 멀티빔 음향 측심기를 통해 얻은 자료를 처리하여, 3차원 공간 데이터인 DEM(Digital Elevation Model)을 생성하고, VRML을 이용한 웹상에서의 해저 지형 가시화를 통해, 세계 어느 곳에서나 웹을 통하여 쉽게 정보를 공유할 수 있는 3차원 해저 지리 정보 시스템의 구현을 목적으로 한다. 멀티빔 음향 측심기를 통해 얻어진 자료는 항해 자료 보정, 음속 보정, 빔 좌표 계산과 분리, 오측심 자료 제거, 조석 보정 등의 단계를 거쳐 측심자료의 정확도 및 신뢰도를 높이는 과정을 거치게 된다. 보정된 멀티빔 음향 측심자료는 무작위 점 사상(Point Topology)으로 산재 되어 있는 빔 자료를 임의의 단위영역으로 변환하는 과정을 거쳐야 하는데, 이 과정을 격자화라고 한다. 자료의 격자화를 통해 3차원 공강 데이터인 DEM 파일을 제작하고, 이 DEM 파일과 음압 영상을 이용해 웹상에서의 3차원 해저 지형의 가시화를 실현한다. 웹상에서의 3차원 지형 가시화에서 방대한 양의 지형 데이터는 데이터 전송 시간과 렌더링 시간에 치명적인 문제이다. 따라서, 렌더링 시간과 데이터 전송 시간을 단축시키기 위한, 지형 자료의 LOD(Level of Detail)를 통해, VRML을 이용한 보다 효과적인 웹상에서의 3차원 해저 지형의 가시화를 실현한다.면 기업은 고객으로 공간적인 제약으로 인한 불신을 불식시키는 신뢰감을 주게 된다. 이러한 고객서비스 향상과 물류비용 절감은 사이버 쇼핑몰이 전국 어디서나 우리의 안방에서 자연스럽게 점할 수 있는 상황을 만들 것이다.SP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projects including scientific and technological effects. Since the HAN projects consists of 18 subprograms, it is difficult In evaluate all the subprograms simultaneously. Despite, each program is being performed under the category of HAN projects, so the common soci