• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.10 no.1
• /
• pp.43-49
• /
• 1999

Objectives : The purpose of this study was to systematically analyze and compare e acoustic sound structure of vocal major student's singing voice. Materials and Methods : The nineteen vocal major students were the subject group and healthy nineteen females were the control group for this study. The subject group was taken a strobovideolaryngoscopy by the use of flexible nasopharyngoscopy. And acoustic analysis was taken between two groups. Additionally the inquiry on usual voice problems and management was performed by thirty-six vocal major students. Results : The subject group presents many functional voice disorder findings such as AP contraction(44%), phase difference(36%) tremor(25%), posterior gap(17%), hyperadduction of vestibular fold(6%), and anterior gap(3%) on strobovideolaryngoscopy. And the vocal major students did reveal an enhanced number of high frequency harmonic partials when singing compared to the control group in the narrow band spectrum study. But there was no significant difference in jitter, shimmer and noise to harmonic ratio in both groups. Almost all vocal major students present a lot of voice problems in singing such as loss of high note(17%), loss of quiet voice(17%), effortful and tired voice(36%) etc on inquiry. And they always effort to prevent vocal dysfunction by the use of various type of method such as voice rest(28%), hydration(28%), gargling with salt(11%) etc. Conclusions : The vocal major students always take care of maintaining a good voice condition, but a lot of vocal major students revealed abnormal strobovideolaryngoscopic findings and they are absent in the conception of systemic and scientific voice management. Therefore, the young singers need a good voice training and voice therapy Program under the good ralationship of laryngologist and voice training teacher.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.15 no.1
• /
• pp.37-42
• /
• 2004

Electrolarynx(EL), battery operated vibrators which are held against the neck by on-off button, has been widely used as a verbal communication method among post-laryngectomized patients. EL speech can produce easily without need of any additional surgery or special training and be used with any other methods. This institute developed a neck-typed EL named "Blueton" in commperation with EL Company Linkus, which consists of 3 parts : Vibrator part, Control part, Battery part. In this study we evaluated the acoustic characteristics of the produced voices by Blueton compared with Servox-inton using MDVP. Three EL users (2 full time users, 1 part time user) were participated. The results revelaed that NHR higher in Servox than Blueton and intensity is higher in Blueton than Servox. The spectra for vowels produced by EL speakers are mixed signals combined with talkers' vocal output and electrolarynx noise. The spectra pattern is similar with two ELs. High, SPI index and vowel spectra from MDVP demonstrated characteristics of both electrolarynxes related to noise signal. This finding suggests that Blueton helps to provide one of useful rehabilitation options in the post laryngectomy patients.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.27 no.2
• /
• pp.95-101
• /
• 2016

Background and Objectives : The main purpose of this study is to clarify perceptual and acoustic analysis for the patients with hypothyroidism after thyroidectomy especially focused on the characteristics of speech articulation with special reference to the consonant production. Materials and Methods : The subjects of the research were 40 male and female adults (males : 5, females : 35). They were all received radioactive iodine treatment which after total thyroidectomy. Voice samples were collected during the three stages of after surgery, pre-radioisotope treatment (RIT), and post-RIT. The acoustic analysis was conducted by using Pratt (ver.5.2.21) after measuring voice onset time (VOT). The subjective evaluation of the voices used CAPE-V. Results : A significant decrease in overall severity was displayed in the CAPE-V following RIT. It may be conjectured that this is connected to the change in voice following RIT. The loudness of the sound displayed a significant decrease in the CAPE-V following RIT. It is conjectured that this is connected to the decrease in vocal intensity following RIT. No statistically significant results were revealed for the comparative analysis on the voice onset time (VOT) in all plosives during the three periods. Conclusion : Perceptually, the overall severity of the voice with hypothyroidism was changed significantly before and after RIT. Eventhough VOT were not significantly changed, it tended to decrease VOT in patients with hypothyroidism.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.327-327
• /
• 2010

자동차에서 실내음질은 구매결정 요소들 중의 하나로 그 중요성이 점차 증가하고 있다. 따라서 다양한 운전조건에서 운전자가 기대하는 실내음질의 기대 수준을 충족시켜야 한다. 소비자는 운전경험과 습관에 따라 기대하는 음질에 차이가 있고 소리에 대한 표현방식도 모호하기 때문에 이러한 주관적 특성을 하나의 통일된 표현으로 정의 하기가 어렵다. 그러나 지난 이십여 년 동안의 음질개발과 차량 실내소음 주관평가의 통계처리로 통일된 표현을 할 수 있었다. 나아가 심리음향학 및 신호처리기술의 발달과 꾸준한 음질연구결과로 소리특성을 객관적으로 나타내는 소리의 시각화가 가능하였으며, 운전자가 인식하는 주관평가와의 상관관계를 높여 차량의 대표적인 음질인자로 정량화하여 음질목표를 설정할 수 있었다. 실내소음의 구성은 엔진 투과음, 흡배기 소음, 바람 소음, 도로 기인 소음 등으로 다양하므로 소음원에 따라 음의 균형을 맞추어 조화로운 음질개발을 하는 것이 중요했다. 또한 차량 판매되는 지역에 따라 선호음이 상이하여 지역별 실내음질의 차별화가 필요했다. 궁극적으로는 운전자의 감성품질을 만족할 수 있도록 음을 제어하여 브랜드 사운드를 개발하고 있다. 이러한 실내음질을 달성하기 위한 방법으로 소음원과 전달경로에 대해 기여도를 분석하고, 경로를 구성하는 시스템 별로 세분화하여 시스템 목표를 설정하였다. 시스템 개발에 중요한 인자로 차량의 동강성 및 흡차음 성능을 들 수 있다. 특히 디젤차량의 비중이 큰 유럽업체의 차량의 동강성 및 흡차음 개발 능력은 높게 평가되고 있다. 이에 유럽의 부품전문회사가 가지고 있는 해석과 시험적인 개발 방법을 통하여 전달계 특성을 만족하기 위한 시스템의 동강성 및 흡차음 특성을 개발하고 있다. 차량음질 튜닝의 중요한 기법 중 하나로 흡배기 개발을 추진하고 있다. 친환경자동차인 하이브리드차량, 전기차량 및 연료전지차량의 경우 전기구동부품에서 발생하는 각종 이음 발생을 최소화 했다. 보행자를 보호하고 운전의 즐거움을 향상하기 위한 가상사운드 개발을 진행하고 있다. 회사 수익성 향상을 위한 원가절감 및 구조 경량화에 따른 음질악화와 연비 향상 및 배기가스 규제 강화로 고성능 고출력 엔진탑재에 따른 음질악화 요인을 극복해야 했다. 운전자의 청감은 차량의 운전성에 따라서도 크게 영향을 받게 되므로 엔진제어와 변속기제어를 통해 음질과 운전성이 조화를 이룰 수 있도록 개발하고 있다. 향후, 소음원에 따른 시스템 최적화 개발, 운전성과 음질 연계 개발과 친환경차량의 가상사운드 개발 등이 자동차 음질 개발의 중요한 이슈로 생각한다.

• Speech Sciences
• /
• v.15 no.2
• /
• pp.131-141
• /
• 2008

The purpose of this study was to find out the acoustic variation on the pre-and post respiration and oral motor for children with cerebral palsy. Five children with spastic CP at the age of 6 in average were practiced by a caregiver at home each for 25 minutes, in total, 45 times. The sustained of vowel /a/ and vowels /a/, /i/, /u/, /e/, /o/ were recorded on CSL and MDVP and analyzed by acoustic parameters. As a result, the maximum phonation time(MPT) was increased from 2.06 to 6.31 and the formant of vowels(F1, F2, F3) had significant differences in F1(/a, i/), F2(/i.u.o/), and F3(/a/) between the controls and the children with CP in pre-treatment. The total average value of vowels had significant differences between the pre-and post-treatment (p< .05). The energy of vowels had significant differences in the vowels /i, u, e, o/ and the total average value between the pre-and post-treatment(p< .001). The jitter percent, shimmer percent, and noise to harmonic ratio had significant differences between the pre-and post-treatment(p< .05). As the respiration and the oral motor improved MPT, voice quality, and articulation of vowel, and the variation of the formant(F1, F2, F3) showed the changes in the shape of lips, the place and the height of the tongue, the various development of therapy programs and the consistent intervention of treatment is needed for the children with cerebral palsy.

• Composites Research
• /
• v.15 no.1
• /
• pp.53-60
• /
• 2002

Composite ablative tubes required capabilities of ablative and structural characteristics were fabricated through filament winding technique and several experiments were conducted to evaluate the structural performance of composite ablative tubes. For this purpose, manufacturing procedures were briefly described and then resin digestion method was applied to measure the fiber volume fraction and the void content of composite ablative tubes. The configuration of tensile specimen fur composite ablative tubes with not losing the continuity of reinforced fibers was suggested by evaluating mechanical properties of several types of the specimen with different widths. Also, suitable processing variables for composite ablative tubes were determined by evaluating mechanical properties of several types of the specimen with different processing variables. In addition, acoustic emission signals were obtained during the proof test and could be applicable to study the crack initiation and the damage mode of composite ablative tubes. Finally, the structural reliability of composite ablative tubes could be verified to satisfy design requirements through the proof and burst tests.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1203-1211
• /
• 2010

In order to study geology and sediment characteristics in Danghang Bay area, surface geological survey, SBP (sub-bottom profiler) survey, and sediment analysis were conducted. Danghang Bay area has a closing coast surrounded by land, and surface layer are covered by mud and sandy mud. Sedimentary facies of the surface layer consists of Mm and Mms facies. A SBP seismic survey shows that gas bearing sediments might be spread throughout the sediment layers, so that it seems to be hard to find acoustic basement and gas seeps are easily found throughout the survey lines. The gas trapped in the sediments may be related to the high organic contents of the sediment, and the thick mud layer may restrain the gas from releasing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.765-771
• /
• 2001

Elastic-plastic fracture toughness JIC can be used a s an effective design criterion in elastic-plastic fracture mechanics. Among the JIC test methods approved by ASTM, unloading compliance method was used in this study. In order to examine the relationship between fracture behavior of JIC test and AE signals, the post processing of AE signals has been carried out by Short Time Fourier Transform(STFT), one of the time-frequency analysis methods. The objective of this study is to evaluate the application of characterization of AE signals for unloading compliance method of JIC test. As a result of time-frequency analysis, we could extract the AE from the raw signal and analyze the frequencies in AE signal at the same time. AE signal generated by elastic-plastic fracture of material has some different aspects at elastic and plastic ranges, or the first portion of crack growth by fracture. First of all, increased energy recorded and detected by using AE count method increase rapidly from the start of ductile fracture. The variation of main frequency range with time-frequency analysis method could be confirmed. We could know fracture behavior of interior material by examination AE characteristics generated in real-time when elastic-plastic fracture occurred in material under loading.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.12
• /
• pp.1209-1215
• /
• 2012

Experiments with premixed flames in a tube have been conducted to investigate the transition phenomenon from a laminar flat flame to turbulent motions. To induce this phenomenon, a flat flame is formed in a tube. Then, the local velocity at the center of the flat flame surface is increased using $CO_2$ laser irradiation. The deformed flame front propagates with an increase in the total flame surface and oscillating instability. Eventually, the flame front accelerates explosively, and it shows turbulent flame motions with a strong noise. The dynamic behaviors of the flame front prior to the turbulent motions are analyzed in this study to elucidate this process. The physical model of the process is presented according to observations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.675-680
• /
• 2007

This paper presents a new method for classification of underwater transient signals, which employs frame-based decision with Mel Frequency Cepstral Coefficients(MFCC). The MFCC feature vector is extracted frame-by-frame basis for an input signal that is detected as a transient signal, and Euclidean distances are calculated between this and all MFCC feature. vectors in the reference database. Then each frame of the detected input signal is mapped to the class having minimum Euclidean distance in the reference database. Finally the input signal is classified as the class that has maximum mapping rate in the reference database. Experimental results demonstrate that the proposed method is very promising for classification of underwater transient signals.