• Title/Summary/Keyword: 음향신호기

Search Result 490, Processing Time 0.03 seconds

The Noise Influence of 4G Mobile Transmitter on Audio Devices (4G 휴대 단말기 송신에 의한 오디오 잡음 영향)

  • Yun, Hye-Ju;Lee, Il-Kyoo
    • Journal of Satellite, Information and Communications
    • /
    • v.8 no.1
    • /
    • pp.31-34
    • /
    • 2013
  • This paper deals with the interfering audio noise caused by LTE(Long Term Evolution) UE(User Equipment) which is 4th generation mobile communications on audio devices. At first, we realized that the interfering signal of the LTE UE is determined by the transmit power of the LTE UE through analysis and measurement. Then, we performed to measure audio noise level according to the variation of transmitting power level and separation distance between the LTE UE and an audio device. As a result, it is required that minimum separation distance should be 25 cm and above in order to protect audio device from the interference noise of the LTE UE with the maximum transmit power level of 22 dBm.

Burst QPSK Transmission System Design with Phase Estimator and Tracker (위상추정기 및 위상추적기를 갖는 버스트 QPSK 전송시스템 설계)

  • Kim Seung-Geun;Choi Youngchol;Kim Sea-Moon;Park Jong-Won;Lee Deokhwan;Lim Yong-Kon
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • spring
    • /
    • pp.183-186
    • /
    • 2004
  • 본 논문에서는 수중 초음파 통신용 QPSK 버스트 수신기를 DSP시스템을 이용하여 구현하기위한 시스템 설계에 대하여 논한다. 본 논문에서 고려하는 시스템은 25kHz의 반송주파수를 사용하고, 심벌율은 5kHz이며, 데이터 전송율은 10,000bps이다. 송신기에서 심벌정보를 전송하기 위해 펄스성형필터를 거친 신호를 디지털 믹서기를 이용하여 디지털 영역에서 반송주파수 대역으로 신호를 변조한 후 200kHz로 샘플링하는 D/A변환기를 이용하여 전송 아날로그 신호를 생성한다. 수신기에서는 수신 신호를 디지털로 처리하기 위하여 100kHz로 free running하는 A/D 변환기를 이용하여 수신 데이터를 얻는다. 수신기에서는 32심벌 길이의 프리앰블을 이용하여 프레임 동기를 찾음과 동시에 개략적인 심벌시간 동기와 위상편이를 추정한다. 추정한 위상편이값은 2차 PLL (phase-looked loop)의 초기값으로 사용하여 위상 추적을 수행하는 전송 시스템이다. 또한, 된 논문에서는 실해역 전송 시험 테이터를 통하여 조류의 변화에 의해 발생하는 Doppler 편이를 보상하기 위하여 PLL이 필수적으로 필요함을 보인다.

  • PDF

A Double-Talk Processing Algorithm of Acoustic Echo Canceller (음향반향제거기의 동시통화처리 알고리듬)

  • 이행우;은명의;김종교
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.3
    • /
    • pp.10-16
    • /
    • 1998
  • 본 논문은 음향반향제거기에서 동시통화구간을 검출하고 처리하는 알고리듬에 대하 여 논하고 있다. 새로운 동시통화처리 알고리듬은 송신신호와 잔류신호간의 상호상관계수를 이용하여 동시통화 여부 및 구간을 검출하고 이 구간에서는 반향제거기의 계수적응을 중지 하도록 하는 것이다. 본 알고리듬을 사용함으로서 동시통화구간의 검출에 소요되는 계산량 이 대폭 감소할 뿐만 아니라 비정상상태의 원인이 동시통화에 의한 것인지 아니면 반향경로 응답의 변화에 의한 것인지를 구별할 수가 있다. 음향반향제거기에 제안한 알고리듬을 적용 하여 모의실험을 수행하므로서 본 알고리듬의 성능을 분석하였고 기존의 알고리듬을 적용한 경우와 비교, 검토하였다. 실험 결과 본 알고리듬을 적용한 음향반향제거기는 동시통화구간 을 완벽하게 검출하므로서 동시통화 후에도 계수가 발산하지않고 안정적으로 정상상태를 유 지함을 확인하였다.

  • PDF

A Study on the Specifications of the Audible Tones of the Switching System for the Telephone Service (교환기 가청신호음에 관한 고찰)

  • Lee, Hui-Jeong;Won, Dong-Ho;Kim, Byeong-Chan
    • The Journal of the Acoustical Society of Korea
    • /
    • v.6 no.1
    • /
    • pp.58-65
    • /
    • 1987
  • The audible tones of switching system employed in the country at present do not only disagree with CCITT Recommendation Q35, but also are different in the specifications and the sense of hearing. Such a discord with the specifications and the sense of hearing causes a subscriber and an operator to confuse. In this paper characteristics of the sense of hearing of them and the accuracy of tone specifications are studied and novel unified audible specifications are proposed. And it is showed that the digital tone generation of digital switching systems can be implemented readily, using a ROM.

  • PDF

A Study on the Design of an Annular Array Transducer for Ultrasonic Hyperthermia (초음파 Hyperthermia용 동심환 변환기의 설계에 관한 연구)

  • 조영환;성굉모
    • The Journal of the Acoustical Society of Korea
    • /
    • v.5 no.4
    • /
    • pp.37-45
    • /
    • 1986
  • 초음파 Hyperthermia를 이용한 치료는 정상세포에 열적 손상을 주지 않으면서 종양 부위만을 적당한 온도로 가열하여야 하며 따라서 종양세포와 정상세포에 대한 정확한 초음파 세기조절이 필요하 게 된다. 본 논문에서는 초음파 Hyperthermia 용 변환기로서 초점거리와 가열범위를 전자적으로 쉽게 조절할 수 있는 동심환 배열 변환기를 설계하였으며 컴퓨터 모의 실험을 통해 그 성능을 예측하였다. 설계된 변환기는 유효직경 118mm, 동작주파수 320kHz 이며 배열 요소의 수는 12개이다. 그리고 이와 같은 동심환 변환기를 동작시키기 위해 카운터를 이용한 디지털 위상 조절 회로를 설계 제작하였으며, 실험 결과, 위상차를 갖는 신호를 발생시킬 수 있었다.

  • PDF

Sinusoidal Interference Rejection by Self-Tuning Method (자기 동조법에 의한 정현파 간섭음 제거)

  • 유흥균;염동홍;안수길
    • The Journal of the Acoustical Society of Korea
    • /
    • v.5 no.3
    • /
    • pp.44-49
    • /
    • 1986
  • 회로의 간편성에 최대 역점을 두어 PLL을 이용한 정현파 간섭음을 실시간으로 제거하는 방식을 제안하였다. SC 여파기를 이용한 적응 노치 여파기ㅘ 적응 대역 여파기를 자기 동조법으로 구동시킴으 로써 간섭음을 제거하였다. SC 여파기의 구동 스위칭 주파수는 제거하려는 신호 주파수으 L49배가 되 도록 하엿으며 소자의 동작 특성상 4KHz의 간섭음 제거 대역을 갖게 된다. 노치 여파기는 6차 여파기 이고 감쇄도는 중심 주파수에서 약 -56dB이다.

  • PDF

Design of a Wide-band Acousto-Optical Spectrometer for Radio Astronomical Observations (우주전파 관측을 위한 광대역 음향광학 전파분광기 설계)

  • 임인성;민경일;오승엽
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.12 no.6
    • /
    • pp.1009-1017
    • /
    • 2001
  • The acousto-optical spectrometer is designed by using 1 GHz bandwidth acousto-optic deflector for radio signal analysis. This system is a high resolution wide band spectrometer which uses I GHz bandwidth and a total of 2,048 channel charge coupled device. When we measured the spectrums of signals deflected by acousto-optical spectrometer, we confirmed the stability of the total system by repetitive observations of the same frequency, and each part of the system worked well. We installed this system onto 60 cm radio telescope, and observed 12CO(J= 1 ∼0) emission lines around CRL 2688, IRC 10216 and NGC 5005 Galaxy center. We could observe effectively very narrow band width radio spectrum as well as wide band radio spectrum. We also confirmed high sensitivity and resolution in observation of 12CO(J-10) omission line of NGC 5005 Galaxy center which is a weak signal.

  • PDF

Manufacture of an Acousto-Optical Spectrometer for Radio Astronomical Observations (우주전파관측용 음향광학 전파분광기의 제작)

  • 임인성;최재현;오승엽
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.1
    • /
    • pp.1-12
    • /
    • 1997
  • The acousto-optical spectrometer as a new type backend of the receiver system for radio astronomical observations is manufactured for radio signal analysis. We studied on the effect of Acousto-Optic and Acousto-Optic devices and designed the optics system. We manufactured the optical mount and the CCD detector for deflected beam and interface card. This acousto-optical spectrometer consisted of a laser, optics, acousto-optic deflector, CCD detector and Interface card. This system use He-Ne laser as a light source and use optics to get parallel beam and to focus the deflected beam. Acousto-optic deflector converts IF signal to ultrasonic wave and deflect the laser beam according to the Bragg deflection. The ultra wide band acousto-optic deflector has 1 GHz bandwidth and a total of 2,048 channel Charge Coupled Device for signal detection. In this study, we discuss the theoretical description on the effect of Acousto-optics, the design of the optics, manufacture of optical mount, CCD detector, interface card and we presented the results of experiment. As a result of measurement, we have 1,000 channels bandwidth from CCD channels.

  • PDF

Performance Improvement of Stereo Acoustic Echo Canceler using the Difference of Stereo Signals (스테레오 신호의 차성분을 이용한 스테레오 음향 반향 제거기의 성능 향상)

  • 김현태;박장식;손경식
    • Journal of Korea Multimedia Society
    • /
    • v.3 no.6
    • /
    • pp.604-610
    • /
    • 2000
  • A stereo acoustic echo canceller has significant cross-correlation between each channel signal. As the result, the adaptive filter coefficient that estimates the acoustic echo path of a receiving room can misconverge to the path or converge slowly. In this paper, a new preprocessor using absolute difference in stereo signals is proposed to reduce cross-correlations and to improve the removal efficiency of the stereo acoustic echo. Compared to the previous preprocessor using a half wave rectifier, the newly proposed preprocessor showed better performance according to computer simulation. In addition, when the paths of transmitting room were changed the performance of the proposed preprocessor was not degraded.

  • PDF

A channel parameter-based weighting method for performance improvement of underwater acoustic communication system using single vector sensor (단일 벡터센서의 수중음향 통신 시스템 성능 향상을 위한 채널 파라미터 기반 가중 방법)

  • Kang-Hoon, Choi;Jee Woong, Choi
    • The Journal of the Acoustical Society of Korea
    • /
    • v.41 no.6
    • /
    • pp.610-620
    • /
    • 2022
  • An acoustic vector sensor can simultaneously receive vector quantities, such as particle velocity and acceleration, as well as acoustic pressure at one location, and thus it can be used as a single input multiple output receiver in underwater acoustic communication systems. On the other hand, vector signals received by a single vector sensor have different channel characteristics due to the azimuth angle between the source and receiver and the difference in propagation angle of multipath in each component, producing different communication performances. In this paper, we propose a channel parameter-based weighting method to improve the performance of an acoustic communication system using a single vector sensor. To verify the proposed method, we used communication data collected from the experiment conducted during the KOREX-17 (Korea Reverberation Experiment). For communication demodulation, block-based time reversal technique which is robust against time-varying channels were utilized. Finally, the communication results showed that the effectiveness of the channel parameter-based weighting method for the underwater communication system using a single vector sensor was verified.