• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.177-185
• /
• 2019

In this paper, we propose and evaluate a FDE combined with STBC transmission structure to cancellation of ISI in underwater acoustic communication. To achieve this purpose, underwater acoustic channels are modeled and the simulation results are presented. In case of STBC-FDE, the transmission rate is less about 4% than STBC-OFDM, but the SER performance is better than STBC-OFDM that is larger from 4.4% to 16.8% at the SNR of 15dB than STBC-OFDM.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.6
• /
• pp.52-58
• /
• 1996

Using the acoustic resonances and oscillatory pulsations considered as the branch of wave technologies, the concept of the acoustic resonance diffusers for waste water treatment which maximize the oxygen transfer efficiency in gas-liquid two phase medium have been proposed, and studies for the principles and performance tests were accomplished. Besides, the design concepts for the low pressure Helmholtz resonator, cylinder and annular type reflection resonator and combined type resonance system have been implemented. The acoustic resonance energy which can speed up the mass transfer process increase the oxygen transfer efficiency, and periodic pulsations generated from the instability of air jet from nozzle make very small air bubbles. Then, the annular type jet resonator(AJR) applying these two principles successfully was evalulated as the most promising device and also the efficiency showing $20{\sim}30%$ better than conventional diffusers has been verified experimentally.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.94-103
• /
• 2001

The goal of using numerical methods in this study is two-fold: to replicate a set of measured, individualized HRTFs by a computer simulation, and also to visualise the resultant sound field around the head. Two methods can be wed: the Boundary Element Method (BEM) and the Infinite-Finite Element Method (IFEM). This paper presents the results of a preliminary study carried out on a KEMAR dummy-head, the geometry of which was captured with a high accuracy 3-D laser scanner and digitiser. The scanned computer model was converted to a few valid BEM and IFEM meshes with different polygon resolutions, enabling us to optimise the simulation for different frequency ranges. The results show a good agreement between simulations and measurements of the sound pressure at the blocked ear-canal of the dummy-head. The principle of reciprocity provides an effect method to simulate HRTF database. The BEM was also used to investigate the total sound field around the head, providing a tool to visualise the sound field for different arrangements of virtual acoustic imaging systems.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.509-517
• /
• 2013

In this paper, we researched a method that makes a good acoustic-speech system using a digital signal processing technique with dynamic microphone as a transducer. Good acoustic-speech system should deliver the original sound input to electric signal without distortion. By measuring the frequency response of the microphone, adjustment factors are obtained by comparing measured data and standard frequency response of microphone for each frequency band. The final sound levels are obtained using the developed adjustment factors of frequency responses from the microphone and speaker to match the original sound levels using the digital signal processing technique. Then, we minimize the changes in the frequency response and level due to the variation of the distance from source to microphone, where the frequency responses were measured according to the distance changes.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.31-37
• /
• 2021

In this paper, we design an acoustic meta-material silencer that operates at low frequency to reduce noise in duct. A high refractive index meta-material silencer is demonstrated with a combination of zigzag structured thin waveguide and helmholtz resonator, which reduces the speed of sound. Finite Element Method (FEM) analysis via thermo-viscous acoustic mesh is performed in order to calculate thermo-viscous dissipation in sub-wavelength waveguide. Sound power reflection, transmission and absorption coefficients are obtained utilizing 4-Microphone Method. The results show that cut-off frequency and transmission loss can be controlled through adjusting intervals of the zigzag structures. A wide-band acoustic silencer is also suggested by connecting meta-materials in series or parallel.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.375-388
• /
• 2022

This paper deals with the process of obtaining sound transmission loss of a cylindrical silencer lined with multi-layered poroelastic sound absorbing materials. The Biot model and the Johnson-Champoux-Allard-Lafarge (JCAL) model were used to deal with waves propagating in multi-layered poroelastic materials. The boundary conditions required for analysis of the silencer were obtained and the numerical process of finding modes was explained. A numerical experiment was conducted on the 2-layered silencer using the modes and the transmission loss converged with the first 12 modes. Finally, the mode matching method proposed in this research was validated by being compared with the results calculated from Finite Element Method (FEM) about different kinds of sound absorbing materials.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.5
• /
• pp.432-440
• /
• 2009

Recently, the necessity of underwater acoustic communication and demand for transmitting and receiving various data such as voice or high resolution image data are increasing as well. The performance of underwater acoustic communication system is influenced by underwater channel characteristic. Especially, a delay spread caused by reverberation and multi-path induces the ISI (Inter-Symbol-Interference) and reduces the communication performance. In this paper, we study the OFDM (Orthogonal Frequency Division Multiplexing) technique for robust the delay spread in underwater channel. We also use the clipping method to overcome the performance degradation in high PAPR (Peak-to-Average Power Ratio). We confirm the performances of underwater communication system by the underwater channel model simulation model and experiment in small water tank. As a result, the multi-carrier modulation with clipping method presented low BER and the previous single carrier modulation had high BER.

• Proceedings of the KSLP Conference
• /
• 1998.11a
• /
• pp.181-181
• /
• 1998

목적 : 성대결절이 있는 서양음악을 전공한 성악도들의 발성시 음향학적 특징과 문제점을 알아보고자 하였다. 대상 및 방법 : 음악대학교 성악과에서 소프라노를 전공하는 학생으로, 음성장애로 인하여 치료를 받은 과거력이 없으면서 성대화상술 검사상 성대결절이 확인된 18세부터 25세 사이의 여학생 10명을 대상군으로 하고, 성대결절이 없는 성악도 20명을 대조군으로 하여 평소 발성상의 문제점과 연주시의 문제점에 대한 설문조사와 음성분석을 시행하였다. (중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.523-526
• /
• 2017

In modern recently technology, 3D-Audio is used to enhance immersion in Virtual Reality. This includes interest of people about VR and AR, which related to the field of computer graphics. In fact, a lot of research has been carried out in recent years into a 3D sound field. However, the existing 3D generator device used for virtual reality does not contain Doppler effect occurred by the sound comes to or leave from a listener, while an angle from the listener and the altitude of the source sound are applied. Therefore, this paper present 3D real sound utilizing Doppler effect with spatial-rotation-speaker. We map the source sound in 3D-space into a real space where a user stays and present 3D real sound by manipulating with rotation angle, phase difference, sound output volume of the sound in 3D-space, according to the location of a virtual source sound. Utilizing both natural Doppler effect of rotating sound that is occurring by spatial-rotation-speaker and artificial Doppler effect generated by frequency-modulation of sound quality could improving the virtual reality for sound condition for perspective listening.

• Product Safety
• /
• s.53
• /
• pp.41-63
• /
• 1997

가전기기의 붐은 가계에 상당한 부담을 주고 있으나, 한편으로는 주부들로 하여금 가사노동으로 부터의 해방은 물론 보건, 오락 및 여유있는 생활을 즐길수 있게 하였다. 이제는 많은 가전제품에도 마이컴이 탑재되어 가정이나 직장에서 OA나 퍼스컴 통신 또는 패미컴 게임 등등 소위 '고도 정보화 사회'로 접어들어 첨단산업이 세계를 지배하는 시대가 되었다. 따라서 이 시대에 사는 사람이라면 누구나 전기$\cdot$전자 제품에 관한 전문적인 학습