• Journal of the Korean Society for Nondestructive Testing
• /
• v.11 no.1
• /
• pp.31-37
• /
• 1991

Acoustic emission(AE) signals detected during metal cutting were applied as the experimental test to sensing tool wear and chipping on the NC vertical milling machine. The in-process detection of cutting tool wear including chipping, cracking and fracture has been investigated by means of AE in spite of vibration or noise through intermittent metal cutting, then the following results were obtained 1) When the tool wear is increased suddenly, or the amplitude of AE signals changes largely, it indicates chipping or breaking of the insert tip. 2) It was confirmed that AE signal is highly sensitive to the cutting speed and tool wear. 3) At the early period of cutting, the wear were large and RMS value increased highly by the influence of minute chipping and cracking, etc. Therefore, the above situations should be considered for the time when the tool would be changed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.3
• /
• pp.15-21
• /
• 1996

This study is focused on the prediction of appropriate tool life by clarifying the correlation between progressive tool wear and AE(Acoustic Emission) signals, while cutting stainless steel by end mill on the machining center. The results of this study were that RMSAE tends to increase linearly along with the increase of the cutting speed, and it was more sensitive to depth of cut than to the variation of feed rate at the same cutting conditions, and RMSAE increases around 0.21mm flank wear hereby AE-HIT also increases. AE signals depend upon tool wear and fracture from the above results. Therefore, the AE signals can be utilized in order to monitor the tool condition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.1 no.1
• /
• pp.15-22
• /
• 2002

This study shows how the change of helix angle of different helix angle end mill affects machining accurracy. It was verified that cutting force are remarkably low when endmill has helix angle of different helix angle 250, 310, 370 and AE signal have less reationshap with the change of helix angle. Moreover, as the number of rotations are increases, the AE signal increased with the proportion to the number but cutting force are inversely proportional to the rotation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.112-118
• /
• 1997

Characteristics of AE(Acoustic Emission) signal is related to cutting conditions, tool materials, and tool geometry in metal cutting. Relation between AE signal and tool wear was investigated experimentally. Experiment is carried out by interrupted cutting for SCM420 workpiece with TiN coating tool on HSS material. AE RMS voltage and count per event were increased according to tool wear. The major results are as follows : 1) AE RMS value is nearly constant as cutting speed changes, but is rapidly increase as feed rate increases. 2) AE RMS value and Count per Event increase as tool wear increases. 3) It is more effective to monitor tool wear by Incremental rate of AE RMS value than by Incremental rate of count per event.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.414-418
• /
• 1996

This paper aims at reviewing the possibility application over normal or abnormal, detection used by AE and the characteristics of grinding process. In this study, when diamond bur in dentistry with chosen grinding conditions were tuned at grinding. The variation of grinding resistance and AE signal is detected by the use of AE measuring system. The tests are carried out in accordance with diamond burs and workpiece: arcyl and cowteeth. According to the experiment results, the following can be expected; AE has the possibility to detect the state normality and abnormality. However, the grinding resistance measuring can find it difficult to detect it. It can be accurately excepted from AE occurrence pattern in contact start point of diamond but and cowteeth, grinding condition and derailment point. It is known that AErms is well compatible with grinding resistance.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.239-244
• /
• 2002

This study shows how the change of helix angle for different helix angle end mill affects machining accuracy. It was verified that cutting forces are remarkably low when endmill has helix angle of different helix angle $25^{\circ}\;, \; 31^{\circ}\; , \; 37^{\circ}$and AE signals have less relationship with the chance of helix angle Moreover, as the number of rotations are increased, the AE signals are increased with the proportion to the number but cutting forces are inversely proportional to the rotation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.64-71
• /
• 1998

This paper investigates the relationship between cutting conditions and Acoustic Emission(AE) signals; $AE_{avg}$, $AE_{rms}$, $AE_{mode}$$AE_{avg}$ and $AE_{rms}$ are increased as the increasing of cutting velocity and depth of cut respectively. The new parameters, derived from $AE_{avg}$ and $AE_{rms}$, which may be used for the in-process detection of tool wear is discussed. It is also known that $AE_{mode}$

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.100-110
• /
• 1995

This paper aims at reviewing the possibility of application over normal or abnormal, detection used by AE, and the characteristics of grinding processes. In this study, when WA-vitri-fied ' resinoid bond grinding wheels:36 kinds of grinding wheel and grinding depth were tuned at the surface grinding, the zone of AE signal generation is theoretically modelled and reviewed by grinding processes. The variation of grinding resistance( F$n^{9}$ $F_{t}$) and AE signal is detected in-process by the use of AE measuring system. The tests are carried out in accordance with grain size and grade of grinding wheels, and work-pieces-STD11 and STD61. According to the experiment's results, the following can be expected;as grinding time passes by, the relation of grinding depth and quantity of AE signal, observing on AE signal and grinding burn suggest the characteristics of grinding processes and evalution on the possibility of control of grinding machine, and monitoring abnormal conditions.e, and monitoring abnormal conditions.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.214-219
• /
• 1997

The mechanical seals, which are installed in rotating machines like pump and compressor, are generally used as sealing devices in the many fields of industries. The failure of mechanical seals such as leakage, crack, breakage, fast and severe wear, excessive torque, and squeaking results in big problems. To identify abnormal phenomena on mechanical seals and to propose the proper monitoring parameter for the failure of mechanical seals, sliding wear experiments were conducted. Acoustic emission, torque, and temperature were measured during experiments. Optical microstructure was observed for the wear processing after every 10 minute sliding at rotation speed of 1750 rpm and scanning electron microscopy was also observed. Except for the initial part of every experiment, the variation of acoustic emission was well coincided with torque variation during the experiments. This study concludes that acoustic emission and torque are proper monitoring parameters for the failure of mechanical seals. The intensity of acoustic emission signals is measured in root mean square voltage. Temperature of sealing face will be used as a parallel parameter for increasing the reliability of monitoring system.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.1 s.94
• /
• pp.26-33
• /
• 1999

Automatic monitoring of cutting process is one of the most important technologies for increasing the stability and the reliability of unmanned manufacturing system. In this study, basic methods which use the acoustic emission (AE) signals and cutting forces were proposed to monitor flank wear (width of flank wear) quantiatively. First, in order to detect flank wear, it was investigated that the influence of cutting conditions, that is, cutting velocity, feed and depth of cut, on AE signals (${AE_rms}$) and cutting forces. Furthermore, the relation between flank wear and the measured signals (${AE_rms}$, cutting force) was discussed.