• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.18-23
• /
• 2012

A method to determine the equivalent circuits of broadband ultrasound transducers is necessary for designing filters that match the impedances of the transducer and the analysis of the transducer. A method is proposed to determine the equivalent circuits of broadband transducers with 2 resonances in the frequency band of interest. The circuit parameters are estimated by iterative Levy method with the measured electrical conductance data. The method is illustrated by computing the conductance and susceptance of the equivalent circuits of 3 types of broadband transducers. The equivalent circuit of a transducer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.98-103
• /
• 2003

This paper presents phenomena of vibration and noise due to acoustic resonance in tube bank of a HRSG. Acoustic resonance is may arise when the vortex shedding frequency coincides with the acoustic natural frequency. At this tube bank, dominant frequencies of vibration in this system were 43.5, 67.5㎐. The 3$\^$rd/ acoustic natural frequency calculated was 68.5㎐. When the difference of vortex shedding frequency and acoustic natural frequency is within ${\pm}$20%, acoustic resonance could occur. In this system, in order to prevent acoustic resonance, acoustic baffle was installed in the tube bank before operating. But acoustic resonance occurred. So, we evaluate the effect of acoustic mode due to baffle extension length. After investigating, we did revise acoustic baffle to eliminate acoustic resonance effectively.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.265-268
• /
• 1999

감쇠가 큰 고분자 복합재료에서 초음파 다중반사파를 이용한 Pulse Echo법, 공진주파수에서 내부마찰계수 측정법과 Rheometer를 이용한 동적탄성계수 측정법을 사용하여 음향감쇠계수를 측정하고 각각의 측정자료를 비교하는 연구를 수행하였다. Pulse Echo법을 이용하여 0.5, 1.0, 2.25MHz에서 음향감쇠계수를 측정하였고, 이때 폴리에틸렌기지 복합재료의 음향감쇠계수는 강화재의 부피분율에 따라 3-15dB/cm 정도로 큰 값을 나타내었다. 폴리에틸렌기지 복합재료를 600kHz 근처에서 공진주파수를 가지도록 시편을 만든 후에 내부마찰계수를 측정한 결과로 계산된 음향감쇠계수는 Pulse Echo 실험에서 구한 값과 잘 일치하는 결과를 얻을 수 있었다. Rheometer를 이용한 동적탄성계수 측정법은 0.1-100Hz의 주파수에서 측정한 자료를 TTSP 이론을 이용하여 1MHz의 결과와 비교하였는데, 단일 고분자 재료에서는 다른 측정방법과 음향감쇠계수가 일치하였지만 복합재료에서는 음향감쇠계수값이 일치하지 않는 결과를 나타내었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.291-304
• /
• 1999

In this work, a mathematical modeling of SAW coupled mode in SAW resonator filter, which is very useful in analyzing the characteristics of periodic electrode structure such as SAW reflective array and inter-digital transducers. was considered by mathematical analytic approach. The design and simulation method for resonator filter was also proposed by equivalent transduction matrix using this mathematical modeling. In order for a designer to simulate, and to design the coupled mode SAW resonator filters effectively that could be applied to mobile communication system, a design simulator for coupled mode filter was implemented by graphic user interface, and it was investigated by designing and analyzing practical SAW coupled mode resonator filter from a view point of application of this simulator.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.439-447
• /
• 2010

In this paper, the resonant characteristic of a Tonpilz transducer with a fixed tail mass has been researched and the feasibility to utilize the transducer in that resonant frequency has been analyzed. The additional resonance is occurred by adhering an elastic tube to the tail mass of a conventional Tonpilz transducer and fixing the other end of the tube. The characteristic of this low resonant mode is analyzed by means of the finite element method, then it is shown that this mode is affected by the variation of the stiffness of the tube as well as the mass of the head mass and tail mass. Based on the analysis results, the Tonpilz transducer is designed to meet specific performance conditions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.4
• /
• pp.277-282
• /
• 2014

Recently, much attention has been paid to nonlinear ultrasonic technology as a potential tool to assess hidden damages that cannot be detected by conventional ultrasonic testing. One nonlinear ultrasonic technique is measurement of the resonance frequency shift, which is based on the hysteresis of the material elasticity. Sophisticated measurement of resonance frequency is required, because the change in resonance frequency is usually quite small. In this investigation, the nonlinear electromagnetic acoustic resonance (NEMAR) method was employed. The NEMAR method uses noncontact electromagnetic acoustic transducers (EMATs) in order to minimize the effect of the transducer on the frequency response of the object. Aluminum plate specimens that underwent three point bending fatigue were tested with a shear wave EMAT. The hysteretic nonlinear parameter ${\alpha}$, a key indicator of damage, was calculated from the resonance frequency shift at several levels of input voltage. The hysteretic nonlinear parameter of a damaged sample was compared to that of an intact one, showing a difference in the values.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.507-513
• /
• 2012

The room modes were showed as the peaks and dips on the low frequency response of the loudspeaker, and were one of the biggest obstacles to reproduce the sound. In order to reduce the occurrence of resonance, equalizing is performed at one position, and the frequency response to be equalized is valid only at that position. Performing the equalization would improve the flatness of the frequency response a little, but it cannot eliminate the ringing. Another method is that it is located the speaker at the specific position where the room resonances were not frequently happened. However, there may be the practical limitation that you may not be able to install the speaker at the position to be wanted. One of the practical solutions to decrease the production of resonance in room is the use of bass trap. In this paper, the practical limit for the room tuning using an equalizer and the room optimization will be discussed. The use of bass traps to solve the resonance problem that is always happened in the room is also proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.77-82
• /
• 1999

대형 화물트럭의 차실 내에 높은 수준의 차바닥 진동을 수반한 높은 소음이 발생하였다. 측정 및 분석결과 문제의 진동 소음은 추진축의 회전 1차 및 2차 성분으로 나타났다. 진동 전달경로상의 구성계 및 구성요소들에 대해 모드해석과 실차 주행 모드 해석시험을 실시한 결과 드라이브라인 및 프레임의 공진주파수가 문제가 되는 소음진동 주파수와 거의 일치하였으며, 또한 캡의 실내음향 공진 모드가 문제되는 주파수에서 존재하였다. 실험결과에 따라 액슬과 액슬간의 축의 장착각도를 변경하여 가진력을 줄이고, 비틀림 동흡진기를 추진축에 장착하여 드라이브라인계 공진을 제어함으로써 문제의 시내진동소음을 현저히 개선하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.41-47
• /
• 1998

이중 통신(Duplexer) 필터를 설계 및 개발하기 위한 최적조건을 구하기 위해 36° LiTaO3 기판 표면에 빗살무늬 변환기를 사용한 모의 실험을 수행하였으며, 전극 재료로는 Cu-Al(W3%)합금을 이용하였다. 제작한 듀플렉스 필터의 사다리(Lader)형 구조로서 직렬 공진기와 병렬 공진기의 결합으로 필터를 구성하였다. 적절한 통과대역과 저지대역을 형성 하기 위하여 직렬 공진기와 병렬 공지기의 주파수 차이를 30MHz로 했으며, 낮은 저지대역 을 형성하기 위하여 두 공진기의 전기용량의 비는 1로 하였고, 전극의 두께는 2,500Å으로 하였을 때 설계 조건과 일치하는 주파수 응답을 얻었다. 제작한 듀플렉서 필터의 주파수 특 성은 중심 주파수는 836.5MHz와 881.5MHz, 통과대역 폭은 25MHz, 삽입손실은 2.5dB 이하 및 저지대역은 -35dB이하로 나타났다.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.171-178
• /
• 2005

An acoustic analysis of a fuel-rich gas generator for the drive of a turbopump in a liquid rocket engine has been performed and the length of a simulating duct has been determined by comparing the resonant frequency of unstable acoustic modes to simulate an actual flight model gas generator. To simulate more realistically, a realistic short-length simulating duct has been determined by considering 1 or 2 wavelength of the unstable modes. Duct-length adjustment to turbopump can be a method to suppress a combustion instability problem by decoupling of acoustic mode and combustion characteristics. This method has been set up and validated with acoustic analysis and hot firing tests.