• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.408-422
• /
• 2000

In this paper, we propose a generalized vector channel model for wireless communication systems using antenna arrays. The proposed channel model reflects path loss. spatial-temporal variation of shadowing, multipath fading , Doppler effect, spatial distribution of local scatterers and delay spread due to remote dominant scatterers. In addition, we use a discrete ray model in which respective ray signal experiences independent shadowing, fading and Doppler shift, and impinges on antenna arrays at a distinct angle. Based on the proposed mode. we derive the relations on the spatial and temporal correlations of the received signals and implement a spatial channel simulator. By comparing the theoretical values with the simulated ones, we verify the effectiveness of the implemented simulator. The simulator is then used to generate an arbitrary channel impulse response and to analyze the channel characteristics under various environments.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.637-654
• /
• 2023

In recent years, the number of users has been increasing with the rapid development of earth observation satellites. In response, the Committee on Earth Observation Satellites (CEOS) has been striving to provide user-friendly satellite images by introducing the concept of Analysis Ready Data (ARD) and defining its requirements as CEOS ARD for Land (CARD4L). In ARD, a mask called an Unusable Data Mask (UDM), identifying unnecessary pixels for land analysis, should be provided with a satellite image. UDMs include clouds, cloud shadows, terrain shadows, etc. Terrain shadows are generated in mountainous terrain with large terrain relief, and these areas cause errors in analysis due to their low radiation intensity. previous research on terrain shadow detection focused on detecting terrain shadow pixels to correct terrain shadows. However, this should be replaced by the terrain correction method. Therefore, there is a need to expand the purpose of terrain shadow detection. In this study, to utilize CAS500-4 for forest and agriculture analysis, we extended the scope of the terrain shadow detection to shaded areas. This paper aims to analyze the potential for terrain shadow detection to make a terrain shadow mask for South and North Korea. To detect terrain shadows, we used a Hill-shade algorithm that utilizes the position of the sun and a surface's derivatives, such as slope and aspect. Using RapidEye images with a spatial resolution of 5 meters and Sentinel-2 images with a spatial resolution of 10 meters over the Korean Peninsula, the optimal threshold for shadow determination was confirmed by comparing them with the ground truth. The optimal threshold was used to perform terrain shadow detection, and the results were analyzed. As a qualitative result, it was confirmed that the shape was similar to the ground truth as a whole. In addition, it was confirmed that most of the F1 scores were between 0.8 and 0.94 for all images tested. Based on the results of this study, it was confirmed that automatic terrain shadow detection was well performed throughout the Korean Peninsula.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.94-106
• /
• 2020

Recently, the radio navigation method utilizing the GPS(Global Positioning System) satellite information is widely used as the method to measure the position of objects. As GPS applications become wider and fields based on various positioning information emerge, new methods for achieving higher accuracy are required. In the case of autonomous vehicles, the INS(Inertial Navigation System) using the IMU(Inertial Measurement Unit), and the DR(Dead Reckoning) algorithm using the in-vehicle sensor, are used for the purpose of preventing degradation of accuracy of the GPS and to measure the position in the shadow area. However, these positioning methods have many elements of problems due not only to the existence of various shaded areas such as building areas that are continually enlarged, tunnels, underground parking lots and but also to the limitations of accumulation-based location estimation methods that increase in error over time. In this paper, an efficient positioning method in a large underground parking space using Fingerprint method is proposed by placing the AP(Access Points) and directional antennas in the form of four anchors using WLAN, a popular means of wireless communication, for positioning the vehicle in the GPS shadow area. The proposed method is proved to be able to produce unchanged positioning results even in an environment where parked vehicles are moved as time passes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.232-232
• /
• 2021

수재해 저감과 예방을 위해서는 공간적 변동성을 반영한 정확한 면적 강우량의 측정은 필수적이다. 이러한 요구에 부응하기 위해 24 GHz 이중편파 전자파를 기반으로 소규모 공간 범위에 대해 저고도의 지상 강우를 30 m의 거리해상도로 관측할 수 있는 전파강수계가 개발되었다. 전파강수계는 시제품이 개발된 이래로 한국건설기술연구원 연천센터와 국내 여러 현장과 인도네시아 등에서 시험을 실시하였다. 임상훈 등(2020)은 전파강수계의 반사도와 비차등위상차를 이용한 강우 추정식을 개발하여 연천 및 거제 관측 자료에 적용한 바 있다. 본 논문에서는 연천센터에 분산 배치한 우량계 자료를 이용하여 전파강수계의 강우 공간분포 측정 성능을 평가하였다. 공간우량계는 15대 중 음영구역 바깥에서 정상 작동한 7개의 0.5mm급 우량계 자료와 핏게이지에 있는 0.2mm급 우량계 2대가 비교에 사용되었다. 전파강수계 강우강도는 비교 위치에 해당하는 점 주변의 레이 방향 5개(37.5 m에 해당) 및 방위각 방향 5개 게이트 등 총 25개의 복셀에서 산출된 강우 정보를 평균하여 비교하였다. 정확도는 지상우량계를 참값으로 보고 MAE(Mean absolute error)로 평가하였다. 그 결과 평균 4.2%의 오차를 보였으며, 우량계의 오차를 ±5%로 가정할 경우 3.3~7.9%로 나타났다. 전파강수계의 누적 강우량 값은 강우계에 비해 작은데, 이는 지속적인 관측을 통해 강우 산정의 정확도를 개선하는 것이 필요함을 의미한다.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.2
• /
• pp.52-60
• /
• 1991

Sound propagation in a sloping sea bed ocean environment demonstrates ray curvature in a direction parallel to the shoreline. The theoretical analysis of this shows that an ensonified region and a shadow region are formed, and their spatial extents depend on the spatial coordinates of source and receiver, a sloping angle and sourece frequency. The purpose of this experimental study using a sloping sea bed model is to check the theoretical prediction as a part of an ongoing investigation in the ocean environment. The sloping sea bed model used in this experiment had an ideal pressure-release boundaries and a sloping angle of $220.5{\circ}$ A single frequency signal and an impulsive signal were used as omnidirectional point sources. The spatial acoustic field characteristics in the across slope direction were measured using the former and the frequency dependent field characteristics in a specific point were obtained using the latter. It has been found that the analysis for the spatial extent of shadow zone and the frequency dependent field characteristics in the across slope direction, has a good agreement with the theoretical solution.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.5 no.1
• /
• pp.9-16
• /
• 2005

In Interior design, light is the most important factor in deciding color, texture and illumination level which are the basic factors of spatial design. To apply rendering technologies on prediction of illuminating effect, it is important to understand and analyse the basic properties of the illumination models that are local illumination model and global illumination model. The illumination models in computer graphics express the factors which determine the surface color, texture and light distribution through the reflection. The purpose of this study is to propose the best way of shading algorithm in interior space provided by the computer, based on the experimental analysis that 5 shading methods are applied to the interior space. The results of this study were as followed. 1) Local illumination models that are Lambert shading, Ground shading and Phong shading are not suitable to the prediction of interior illumination effect. 2) Ray tracing that is global illumination model could be adopted to interior illumination effects. Ray tracing is a very versatile algorithm because of the large range of lighting effects it can model. 3) Neither radiality nor ray tracing offers a complete solution for simulating all interior illumination effects. 4) Radiosity excels at rendering diffuse-to-diffuse inter-reflections and ray tracing excels at rendering specular reflections. By merging both shading techniques, that offers the best of both. Using computer technologies to simulate lighting in preliminary design stage which will provide information for designers and occupants to determine the effect of using artificial light sources at each stage of their design process. Further study in illumination analysis, prediction of illumination effect, and lighting calculation is required as computer media expands.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.151-159
• /
• 2011

Due to the Korean government's renewable energy support policy such as the renewable energy utilization building certificate and enlarging the compulsory ratio of investment on the public building, the rooftop photovoltaic projects are expanding rapidly. It is very important for the rooftop photovoltaic projects to analyze the shading effect of the adjacent structures or own facilities. But, the photovoltaic arrangements are planned by the experience of the designers or simple graphic tools. The purpose of this study is to build the process model for optimizing of rooftop photovoltaic arrangement based on three-dimensional geo-spatial information.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.32-39
• /
• 2012

In this paper, the implementation of location based services (LBS) using S-DMB (satellite-digital multimedia broadcasting) system was proposed. In S-DMB System, the frequency of transmitted signal is about 2 GHz which has a characteristics of strong straightness but weak diffraction so that there are many shade areas such as indoors and underground spaces. Therefore the signal transmitted from the satellite should be retransmitted by the earth repeaters called as gap filler. Because each gap filler has its own identification value, the gap filler ID introduces the area in which the gap filler was installed. Generally, the 51st data symbols of S-DMB pilot signal transmitted from the satellite are padded by dummy value and gap filler ID is embedded in this pilot symbol by the gap filler when S-DMB signals are retransmitted by gap fillers. So using gap filler ID of S-DMB system, LBS such as region registration, distance and time to destination, alarm of local area information could be implemented. In the experiment to prove the performance of the proposed LBS system using the gap filler ID of the S-DMB system, the firmware of S-DMB chip composing of RF and baseband parts was lightly modified so that application processor was able to manipulate the gap filler ID and the its related regional information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.293-301
• /
• 2005

In case of the roads that pass the mountain area, the cut sections or the tunnels are constructed. And In winter season it appears sunshine few in the specific segment, the shade is continued last and the freezing sections occur. So, the attention is necessary in traffic safety. This study was to evaluate the influence of sunshine and surface freezing sections expected in route plans of roads using GIS and makes alternative ideas in road stability security. After selecting 29 km sections of Donghae highway and creating a 3 dimensional terrain surface through the digital conversion of design plan data, it reflects the road alignment data of the same coordinates and a 3 dimensional road modeling is created. It set shadow time of road surface for the solar trace in the winter solstice in 20 minute interval. Shade areas are displayed and inputed in polygon data by manual vertorizing. Graphic and attribute data of this shade section is constructed in geodatabase of ArcCatalog. And it extracted the freezing section using intersect fuction of the GIS spatial analysis. By analyzing the winter meteorological data of temperature, rainfall, snowfall, humidity, and etc. and grasping dangerous freezing section of the road surface effectively, it will be able to make alternative ideas of the preliminary stability evaluation reflected in basic design.

• 대한핵의학회:학술대회논문집
• /
• 1980.05a
• /
• pp.6.2-7
• /
• 1980

간장에 공간점유성병변(암, 농양, 낭종성병변, 혈종 등)이 있을 때는 정적간이미징에서 모두 냉구로 나타난다. 따라서 진단적 특이성이 없다. 그러나 감마카메라를 적절히 잘 이용하면 간암과 간농양을 쉽게 그리고 단시간내에 진단 및 감별할 수 있다. 즉 간암이나 간농양이 의심되는 환자에게 핵제제를 이용한 간동맥기에 열구로 나타나서 정맥기에도 계속 더 강한 열구로 나타내게 되며 간섭취기에는 열구의 음영이 점점 약해져서 종말에는 선명한 냉구로 변해 버린다. 그러나 간농양은 간동맥기, 간정맥기 및 간섭취기 모두에게 계속 냉구로 나타나므로 쉽게 간암과 감별진단이 가능하다. 한편 이 검사는 정적간이미징을 위하여 핵제제를 경정맥투여시에 부담없이 시행하게 되므로 루틴화가 가능하며, 앞으로 간암의 조기진단에 크게 기여하리라 확신한다.