• Title/Summary/Keyword: 은

Search Result 38,366, Processing Time 0.055 seconds

Genetic Environments of Au-Ag-bearing Gasado Hydrothermal Vein Deposit (함 금-은 가사도 열수 맥상광상의 성인)

  • Ko, Youngjin;Kim, Chang Seong;Choi, Sang-Hoon
    • Economic and Environmental Geology
    • /
    • v.55 no.1
    • /
    • pp.53-61
    • /
    • 2022
  • The Gasado Au-Ag deposit is located within the south-western margin of the Hanam-Jindo basin. The geology of the Gasado is composed of the late Cretaceous volcaniclastic sedimentary rocks and acidic or intermediate igneous rocks. Within the deposit area, there are a number of hydrothermal quartz and calcite veins, formed by narrow open space filling along subparallel fractures in the late Cretaceous volcaniclastic sedimentary rock. Vein mineralization at the Gasado is characterized by several textural varieties such as chalcedony, drusy, comb, bladed, crustiform and colloform. The textures have been used as exploring indicators of the epithermal deposit. Mineral paragenesis can be divided into two stages (stage I, ore-bearing quartz veins; stage II, barren carbonate veins) considering major tectonic fracturing event. Stage I, at which the precipitation of Au-Ag bearing minerals occurred, is further divided into three substages (early, middle and late) with paragenetic time based on minor fractures and discernible mineral assemblages: early, marked by deposition of pyrite and pyrrhotite with minor chalcopyrite, sphalerite and electrum; middle, characterized by introduction of electrum and base-metal sulfides with minor argentite; late, marked by argentite and native silver. Au-Ag-bearing mineralization at the Gasado deposit occurred under the condition between initial high temperatures (≥290℃) and later lower temperatures (≤130℃). Changes in stage I vein mineralogy reflect decreasing temperature and fugacity of sulfur (≈10-10.1 to ≤10-18.5atm) by evolution of the Gasado hydrothermal system with increasing paragenetic time. The Gasado deposit may represents an epithermal gold-silver deposit which was formed near paleo-surface.

Mercury Free Flat Discharge Lamps for LCD Backlighting (LCD 배면광을 위한 무수은 평면방전램프)

  • Shiga, Tomokazu
    • The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.15 no.2
    • /
    • pp.31-38
    • /
    • 2001
  • LCD는 비발광형 소자이므로 배면광이 필요하다. 현재의 LCD 배면광용 냉음극 형광램프는 전기-광학적 특성을 좋게 하기 위하여 수은방전을 사용한다. 그러나 수은의 이용은 외부 온도에 따라 특성이 변하는 결점과 환경 문제가 있다. 이 결점을 보완하기 위하여 원통방전형, 미세방전형 그리고 평면방전형 등 세가지 방식의 무수은 램프가 개발되어 왔다. 원통 방전형 무수은 램프는 수은 대신 Xe을 사용한다. Xe 방전이 수축되는 것을 막기 위하여 한쪽 전극은 외벽에 코일형태로 감아서 사용한다. 그리고 코일형태의 전극의 권선 간격을 조절하여 균일한 방전을 얻는다. 이 형태는 무수은 냉음극 형광램프의 두배의 광속을 얻을 수가 있다. 미세방전형 무수은 램프는 두 개의 절연체로 절연되 금속 전극사이의 방전공간에 수많은 미세방전을 일으켜 발광시킨다. 이 방식은 대향 방전구조와 면 방전구조의 두가지가 있다. 이 방식은 전극이 유전체로 둘러쌓여 있으므로 수명이 높다. 새로운 평면방전형 무수은 램프를 개발하였다. 이 램프는 두 개의 유리평판 사이에 방전공간을 만들고 한쪽 유리면의 양쪽 가장자리에 두 개의 전극을 설치하여 면방전을 유도한다. 양쪽 유리면에는 삼원색 형광체를 도포하고 Xe을 봉입하여 Xe의 진공자외선으로 형광체를 발광시킨다. 이 램프는 전극이 유전체로 덮혀있어 수명이 길다. 실험결과 기체압력 6.7[kPa], 구동전압 1,130[V]에서 최대휘도 9,200[$cd/m^2$], 광효율 20.4[lm/W]을 었었고, 기체 압력 2.7[kPa] 구동전압 1,120[V]에서 최대효율 34.1[lm/W], 휘도 1,080[$cd/m^2$]을 얻었다. 현재 무수은 램프는 수은 램프에 비해서 광학적 특성이 좋지 못하다. 무수은 램프에서 좋은 광학적 특성을 얻기 위해 가장 중요한 것은 수축이 없이 방전을 확산시키는 것이다. 이를 위해서 램프구조와 구동법을 최적화하는 것이 필요하다. 또한 기체압력을 높임으로서 Xe의 여기복사를 얻을 수 있었다.

  • PDF

Fabrication of Silver Micro Lines by Ink-Jet Method (잉크젯 기법을 이용한 은 미세라인 형성)

  • Byun, Jong-Hoon;Seo, Dong-Soo;Choi, Yuungmin;Chang, Hyunju;Kong, Ki-Jeong;Lee, Jung-O;Ryu, Beyong-Hwan
    • Journal of the Korean Ceramic Society
    • /
    • v.41 no.10 s.269
    • /
    • pp.788-791
    • /
    • 2004
  • We have studied the fabrication of silver micro lines using the silver nano sol on ITO substrate by an ink-jet method. The average particles size of $10wt\%$ silver nano sol synthesized with polyelectrolytes was smaller than 10 nm. The pattern formation of silver nano sol on the substrate closely related with the contact angle of the silver nano sol. The dot shaped of silver nano sol on bare ITO substrate was formed due to the high contact angle of silver nano sol. When ITO substrates was treated with 100 ppm polyethylenimine for silver nano sol patterning, fine silver micro lines of $60{\sim}100{\mu}m$ width was fabricated by ink-jet method.

Transient Temperature Distribution, Thermal Stresses and Strains in a Composite Cylinder with a Concentric Hole (동심형(同心形) 구멍을 가진 복합(複合)실린더의 과도적(過渡的) 온도분포(溫度分布), 열응력(熱應力) 및 열변형도(熱變形度)의 해석(解析))

  • Eui-Jin,Jun;Hyo-Chul,Kim
    • Bulletin of the Society of Naval Architects of Korea
    • /
    • v.11 no.1
    • /
    • pp.35-44
    • /
    • 1974
  • 열박음(shrink fitting)으로 인(因)한 동심형(同心形) 구멍을 가진 복합(複合)실린더의 과도적(過渡的) 온도분포(溫度分布), 열응력(熱應力) 및 열변형도(熱變形度)를 이론해석(理論解析)하였다. 온도분포해석(溫度分布解析)에서 외부(外部) 실린더는 균일온도(均一溫度)로 가열(加熱)되어, 실온(室溫)의 내부(內部) 실린더와 접촉면(接觸面)에서 일어나는 열전도(熱傳導)에 의(依)하여 냉각(冷却)되고, 외부(外部) 표면(表面)은 대기중(大氣中)에 노출(露出)된 상태(狀態)로 취급(取扱)하였다. 열응력(熱應力)은 평면변형도조건(平面變形度條件)을 만족(滿足)하는 것으로 생각하였으며, 물성(物性)은 온도(溫度)에 무관(無關)한 상수(常數)로 취급(取扱)하였다. 온도분포(溫度分布)는 열전도문제(熱傳導問題)만을 고려(考慮)함으로서도 유효(有效)한 해(解)를 얻을 수 있으며 열응력(熱應力)은 접촉면(接觸面)에서부터 형성(形成)되며, 반경방향응력(半徑方向應力)은 시간(時間)이 경과(經過)함에 따라 압축응력(壓縮應力)이 증가(增加)하여 접촉면(接觸面)에서 최대치(最大値)를 갖고, 원주방향응력(圓周方向應力)은 접촉면(接觸面)에서 초기(初期)부터 거의 최종상태(最終狀態)와 같은 크기를 갖음을 알 수 있다. 균일온도분포(均一溫度分布)가 이루어지면 열응력(熱應力)의 형성(形成)은 완료(完了)되게 되며, 이때의 열응력(熱應力)의 크기와 분포경향(分布傾向)은 평면응력조건(平面應力條件)을 사용(使用)하였다는 사실(事實)을 고려(考慮)하면 $Lam\acute{e}$의 이론해(理論解)와 일치(一致)함을 알 수 있었다.

  • PDF

A Survey of Nutritional Status on Pre-School Children in Korea (학영기전아동(學齡期前兒童)의 영양실태조사(營養實態調査))

  • Ju, Jin-Soon;Oh, Seoung-Ho
    • Journal of Nutrition and Health
    • /
    • v.9 no.2
    • /
    • pp.68-86
    • /
    • 1976
  • The primary purpose of this study is to evaluate the correct nutritional status on pre-school children in Korea. Furthermore, it made an attempt to find and define nutrional problems, and assist in establishment on their nutritional improvement plan. For this, food intake and health condition (physical, clinical, biochemical and parasitological) survey on 109 Pre-school children in both sexes, randomly selected from Yang-Gu area in Gang-Won province and Rea-ju area in Kyong-gy Province, were conducted by means of three-day records, during the two periods of Spring and Fall season in 1975. The results obtained are summerized as follows: 1. The food intake; Average food intake of the subjects per day were $508{\sim}647g$ ($83{\sim}91%$ in vegetable foods and $5.5{\sim}11.7%$ in animal foods) in Yang-gu area, and $587{\sim}698g$ ($88{\sim}89%$ in vegetable foods and $6.3{\sim}7.6%$ in animal foods) in Rea-ju area. 2. The intake of energy and nutrients; a) Calory intake. Average energy intake of subjects per day in Yang-gu area$(1120{\sim}1415kcal)$ were all lower than the Korean Recommended Dietary Allowances (RDA) in either Spring and Fall survey, whereas the subjects in Rea-ju area were lower intake $(1213{\sim}1418kcal)$ than the RDA in the Spring but higher intake$(1516{\sim}1755kcal)$ than the RDA in the Fall, and the average intake were similar level with that of RDA. b) Protein intake. Average protein intake of the subjects per day in Yang-gu area $(33{\sim}43g)$ girl subjects in Rea-ju area $(35{\sim}39g)$ were lower than the RDA in either Spring and Fall survey, whereas the boy subjects in Rea-ju area$(36{\sim}38g)$ were lower in Spring and higher $(49{\sim}57g)$ in the Fall than that of the RDA, but the average $(43{\sim}47g)$ were similar level with the RDA. The protein intake from animal sources in all subjects were much lower $(5.5{\sim}11.7\;of\;total\;protein)$ than the RDA. c) Fat intake. Average fat intake were very lower in all subjects of both area $(14{\sim}24g\;in\;Yang-gu,\;10{\sim}12g\;in\;Rea-ju)$ than that of RDA which is recommended $12{\sim}14%$ of total energy to be supplied from fat. d) Calcium intake. Average calcium intake were very low in all subjects of both area $(264{\sim}355mg\;in\;Yang-gu\;and\;283{\sim}429mg\;in\;Rea-ju)$, especially, these in Spring were about a half level of the RDA, and it was much increased in the Fall due to increased intake of milk, but it was still not enough than the RDA. e) Vitamin A intake. Average intake of V.A ($703{\sim}1465\;IU$ in Ynag-gu and $750{\sim}1521\;IU$ in Rea-ju) were also lower than the RDA, moreover their V-A sources were mainly vegetable, so that the V-A supply might be critical one for the subjected. f) Riboflavin intake. Average riboflavin intake on all subjects in both area except boys in Rea-ju area in Fall, were very lower than the RDA. 3. The physical status; a) Average weight and height of boys aged 4 and 5 in Yang-gu area and girls of aged 5 in Rea-ju area were lower than those of Korean Standard of 1967 report, but those by age of girls in Yang-gu area and boys in Rea-ju area were a little heigher than the Korean Standard. It is, hower, present Korean standard of physical status might be somehow heigher than the 1967, since the socio-economical situation has been much improved during past a decade. So that, if one considered on this sense, the physical status of the subjects on this survey might be somehow lower than those of present Korean standard. b) Average upper arm circumference in both area were no difference each other, and their mean values of age 4, 5 and 6 in boy and girl were 15.6, 16.5, 16.4 and 15.5, 16.5, 16.4cm respectively. c) Average chest girth of boys were similar to those of Korean standard whereas the girls were smaller than the Korea standard. The average head circumference also showed similar tendency with the chest girth. 4. The clinical findings; The most popular clinical signs were angular stomatitis and dental caries, and boys had more heigher incidence then the girls. 5. The biochemical findings; a) Hemoglobin and anemia Average Hb value of boys and girls were 11.4 and 10.9g per 100 ml of blood respectively. The incidence of anemia (Hb value below 11 g/100 ml, by WHO) was increased by age, and girls had more heigher incidence than the boy (34% : 48%). The incidence of anemia in age of 4,5, and 6 in boys and girls were 28%, 41% 34%, and 33%, 50%, 49% respectively. The degree of the anemia was not severe, and the anemia of there subjects may be caused mainly low intake of better quality protein and low iron intake as well. b) Hematocrit. Average Ht value of whole subject were $39.9{\sim}41.6%$. c) Blood plasma protein. Average blood plasma protein contents of whole subjects were $6.6{\sim}7.4gm$ per 100 ml. The incidence of deficient range (<6.0g%, by ICNND) was only one girl of age 4 in yang Gu area. 6. Parasitological findgs; The most popular parasitism were asicris lumbicoides and trichocephalus trichiura, and about 2/3 of the whole subjects were suffering one or more of these parasitism.

  • PDF

탄소섬유 상 Seed 입자의 결정구조에 따른 은나노구조체 형상 제어

  • Lee, Su-Min;Lee, Jae-Hyeok;Kim, Gwang-Beom;Kim, Seon-Min
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.383-383
    • /
    • 2012
  • 최근 나노 소재의 활용 가능성이 확대되어감에 따라 다양한 소재의 나노구조체에 대한 연구가 진행되어 왔다. 그 중 은(Silver)은 열전도율과 전기전도율이 가장 우수한 금속으로 다양한 형태의 은 나노 입자를 형성할 수 있고. 이를 탄소, 비석, 고분자 등의 기판에 다양한 방법으로 성장시키는 연구가 진행되었다. 기판으로 사용되는 재료 중 탄소 복합소재는 내열성, 화학적 안정성, 열전도성, 저열팽창성에 따른 치수 안정성, 유연성 등의 우수한 특징을 지니고 있으며 최근까지 방열 소재로서 활용되고 있다. 본 연구에서는 탄소섬유의 표면에 다양한 결정 구조를 가지는 Ag seed 입자를 형성하고 폴리올 공정을 통하여 와이어 형태의 나노구조체를 성장시켜 그 형상제어 특성을 FE-SEM을 통하여 확인하였다.

  • PDF

은 나노선 투명전극 기반의 산화아연 나노선 유기 태양전지 특성평가

  • Sin, Hyeon-Jin;Park, Seong-Hwak;Gang, Hyo-Gyeong;Kim, Dong-Hwan;Kim, Seong-Hyeon
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.678-678
    • /
    • 2013
  • 은 나노선은 투명 금속전극으로 저온 공정이 가능하고, 플랙서블 기판에 사용 가능하여 다양한 분야의 응용 소재 연구가 진행 중에 있다. 본 연구에서는 전면 전극으로 은 나노선을 스프레이 코팅하고, 알루미늄 도핑된 산화아연(AZO)을 sputter로 증착하였다. 광 경로를 길게 하기 위해 AZO 기판을 수열합성법을 통해 산화아연 나노선을 성장하였다. 은 나노선 전극 기판과 산화아연 나노선이 성장된 기판의 광 투과도를 분석하기 위해 UV-visible을 이용하였으며, FE-SEM, AFM을 이용하여 각 기판의 형상을 분석하였다. 은 나노선은 500 nm 파장영역에서 투과도 86.93%, 면저항 16 ${\Omega}/{\square}$보였다. ITO 기판보다 400~600 nm 영역에서 헤이즈가 증가되는 것을 확인 할 수 있었다. 산화아연 나노선이 성장된 기판을 이용하여 P3HT:PCBM 블랜딩된 유기 태양전지를 제작하여 전기적 특성 및 효율을 평가하였다.

  • PDF

Cascaded high-order Stokes Generation in Brillouin/Erbium Fiber laser with Enhanced Feedback Coupling (향상된 되먹임 결합구조를 가진 브릴루엥/어븀 광섬유 레이저에서 연속된 고차 스토크스 신호의 발생)

  • 박갑동;이재형;장준성
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.102-103
    • /
    • 2000
  • 최근 광통신 시스템에서는 파장분할다중화(WDM) 방식의 도입으로 인해, 한 개의 레이저 신호를 입사시켜 여러 개의 레이저 신호를 발생시켜 광원으로 사용하는 연구가 활발히 진행되어 왔다. Park et al.[1]은 Erbium Doped Fiber Laser(EDFL)에서 1.1nm 파장간격으로 24라인을 얻었고, Yamashita et al.[2]은 내부 에탈론 구조를 가진 EDFL에서 0.8nm 간격으로 17라인, D.Yu et al.[3]은 반사형 거울과 Circulator를 사용한 Brillouin/Erbium Fiber Laser(BEFL)에서 0.08nm 간격으로 30라인, G.J.Cowle et al.[4]은 Injection-Seed Locking을 이용한 BEFL.에서 0.09nm 간격으로 12라인 그리고 N.S.Kim et al.[5]은 내부 되먹임을 이용한 BEFL에서 0.09nm 간격으로 4라인을 각각 발생시켰다. 여기서 중요한 요소로는 발생된 레이저 신호의 안정성, 각 신호들 간의 파장간격, 레이저 신호의 수 그리고 Peak Intensity 간의 차이 등이 있는데 각 연구방식에 따라 다양한 결과를 보여준다. 본 실험에서는 향상된 되먹임 구조를 가진 BEFL에서 다파장 발생에 관한 연구를 하였다. (중략)

  • PDF

Synthesis of Submicron Silver Particle Using Room Temperature Ionic Liquids (상온 이온성 액체를 이용한 미세 은 입자 제조)

  • Yoo, Kye Sang
    • Applied Chemistry for Engineering
    • /
    • v.23 no.1
    • /
    • pp.14-17
    • /
    • 2012
  • Submicron silver particles were synthesized by chemical reduction with various room temperature ionic liquids. The size and distribution of silver particles were significantly affected by the anion type of ionic liquids and this is mainly attributed to the different abilities of the anions to coordinate with the silver particle, leading to various coagulation of silver particles. Among ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate was the most effective to synthesize submicron silver particles.

Enhanced Electrical & Environmental Properties of AgNWs through Plasma Treatment (플라즈마 처리를 통한 은 나노와이어의 특성 향상 기술)

  • Jeong, Seong-Hun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2016.11a
    • /
    • pp.95-95
    • /
    • 2016
  • 은나노와이어 투명전극은 높은 투과도와 높은 전도도를 가짐과 동시에 높은 유연성을 가지고 있어 차세대 투명전극으로 주목받고 있다. 많은 연구자들이 이를 이용하여 다양한 전자소자에 대한 적용 연구를 수행하고 있고, 터치스크린에 적용한 제품 등이 실제로 선보이고 있다. 하지만 ITO에 비해 높은 생산 단가와 낮은 열적, 환경적인 안정성은 이를 다양한 품목에서 실용화하는데에 있어 문제가 되고 있다. 은나노와이어에 장시간 열이 가해지거나, 습도에 노출되거나, 국소 부분에 높은 열/전류가 가해지게 되면 Rayleigh Instability 현상을 보이며 각각의 나노와이어가 끊어지는 현상이 발생한다. 또한, 공기 중의 수분에 의한 산화가 발생하는 문제도 존재한다. 이러한 문제를 해결하기 위해 상부에 이종의 물질을 덮어 Passivation을 수행하지만, 이는 생산 단가의 상승으로 이어진다. 본 연구에서는 플라즈마 기술을 활용하여 은나노와이어의 특성을 강화시키는 연구를 수행하였고, 이종의 물질 형성 없이 전기적, 환경적 안정성을 향상시킬 수 있었다. 또한 전기적 특성의 향상으로 인해 더 적은 은나노와이어의 양으로도 같은 전기적 특성을 가질 수 있었고, 이를 통해 높은 투과도/재료소모 절감의 효과를 동시에 얻을 수 있었다.

  • PDF