• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.683-692
• /
• 1996

Background: Although most of the patients with tuberculous pleural effusions completely reabsorbed their effusions and became asymptomatic within 2 to 4 months, later surgical procedures such as decortication is needed in some patients because of dyspnea caused by pleural loculations and thickening despite anti-tuberculous chemotherapy. It is obligatory to secure adequate drainage to prevent the development of complications. But, the best methods for treating loculated tuberculous pleural effusions remain debatable. Recent several reports revealed that intrapleural instillation of fibrinolytic agents is an effective adjunct in the management of complicated empyema and may reduce the need of surgery. Purpose : The effects of catheterization with intrapleural urokinase instillation were prospectively evaluated in the patients with septated tuberculous pleural effusion, and compared with other therapeutic effects of different modalities of therapy such as repeated thoracentesis and small-bored catheterization. Methods : Forty-eight patients diagnosed with tuberculous pleurisy were randomly separated into three groups; control group(n=13), catheter group(n=12), urokinase group(n=22). In urokinase group, dose of 100.000U urokinase was instilled into the pleural cavity via a percutaneous drainage catheter for complete drainage or total dose of 700,000U of urokinase. After two hours clamping, the catheter was opened and intermittently irrigated. The early and late effectiveness of therapies was assessed by radiographically and by measuring the volume of fluid drained from the catheter. Results : There was statistically significantly better result in the urokinase group in respect of frequency of catheterization, frequency of catheter obstruction and the duration of catheterization in early effectiveness(p < 0.05). There were no difference in radiologic improvement of follow-up in later phase chest X-ray between urokinase group and catheter group in later phase(p > 0.05). But there were more failure rates in control group especially honeycomb septa in pleural effusion sonographically than former two groups. And there were no complications of urokinase such as fever or hemorrhage. Conclusion : In the treatment of septated tuberculous pleurisy, there were better results in urokinase than those of catheterization alone in early effectiveness. And there was no difference in radiographic improvement between urokinase group and catheter group. Intrapleural instillation of urokinase is an effective and safe mode of treatment for septated tuberculous pleural effusions and alleviates the need for thoracotomy.

• Elastomers and Composites
• /
• v.35 no.1
• /
• pp.38-45
• /
• 2000

Influence of rubber composition on migration of antiozonants to the surface in ternary rubber-based vulcanizates composed of natural rubber (NR) styrene-butadiene rubber (SBR), and butadiene rubber (BR) was studied. Of the three rubbers, contents of two rudders were same and only the other one content was different (variable rubber) IPPD and HPPD were employed as antiozonants. Migration experiments were performed at $60^{\circ}C$ for 21 days and outdoors for 4 months. Migration rates of the antiozonants increase by increasing the content ratio of the variable rubber in the vulcanizares from NR/SBR/BR=1/1/0.2 to 1/1/1 and then decrease with an increase of the content ratio of the variable rudder from 1/1/1 to 1/1/5. Migration behaviors of the antiozonants in the ternary rudder-based vulcanizates depending on the rubber composition were explained by the intermolecular interactions between rubber and antiozonant, by the solubility difference of the antiozonants for the rubbers, and by the interface formed between dissimilar rubbers in the triblends.

• Reproductive and Developmental Biology
• /
• v.31 no.1
• /
• pp.29-33
• /
• 2007

This study was conducted to examine the development of in vitro fertilized (IVF) and nuclear transfer (NT) embryos following vitrification IVF and NT embryos developed to the blastocyst stage were equilibrated by 3 steps, vitrified and thawed, and their survival and hatching rates were examined. In IVF embryos, higher survival (82.1%, 96/117) and hatching rates (64.1%, 75/117) were obtained respectively after thawing and culture in expanded blastocysts compared to blastocysts (p<0.05). High survival and hatching rates were also obtained by vitrification of NT blastocysts, especially in expanded and hatching blastocysts (81.1 and 78.3%, respectively). The result of this study shows that IVF and NT blastocysts, especially late stage blastocysts, are successfully cryopreserved by vitrification.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.25-31
• /
• 2009

In this study, the problem of existing soil pavement is a long-term durability lack and crack occurrence. It complements in order to develop the environmental soil pavement material which composites readily blended mineral binder of liquid and decomposed granite soils. It was estimated optimal mixture proportion for unconfined compressive strength, permeability, $Cr^{6+}$detection test, SEM test with age, freezing and thawing test. It resulted mixture proportion of powder types mineral binder for rates of cement : fly ash : plaster was optimal rates of 50 : 33 : 7, and $Cr^{6+}$detection test as a result was a slight production. SEM test with 3days as a result was made Ettringite. It was found that this material was early development of early-strength for chemical. This study indicated that it will execute field appliciability Evaluation test, examination of soil pavement method with decomposed granite soils and mineral binder.

• Journal of the Korean association of regional geographers
• /
• v.9 no.4
• /
• pp.534-545
• /
• 2003

The main purpose of this paper is to describe the granitic regolith and frost creep phenomena in Daegwanryung area in order to demonstrate the relationship of the weathered materials and the surrounding surface, in order to point out that the characteristics of this particular complex of granitic regolith most closely resemble those of soil frost creep phenomena formed elsewhere under periglacial conditions. For this study, the writer has clarified their structure and its associated milieux, with a group of methods and techniques, field survey, micro-morphological analysis, granulometry of weathered materials etc. Such facies of granitic regolith in situ with silty heterometric materials and micas are prone to be deformed by cryo-suction as well as deep freezing. It was probably formed by cryogenic activity, or frost creep in the periglacial climate of a very cold and humid condition.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.475-482
• /
• 2007

The property and applicability of the organic-inorganic synthesized penetrating and reinforcing agent, which is developed in order to improve durability of concrete structures and prevent deterioration that may occur as service years increased, are researched with experimental works. TEOS (tetra-ethoxyorthosilicate) and acrylate monomer are synthesized by the solution polycondensation method in order to formulate silicate with sol-gel process and improve durability of concrete. Additional substances such as isobutyl-orthosilicate is supplemented in order to improve the performance of the agent. After the developed organic-inorganic penetrating reinforcing agent penetrates, a flexible impact alleviating layer is formed with organic monomers as well as the agent strengthens concrete by filling up the internal pore of concrete with stable compounds after penetration. Penetrating and reinforcing agent can be applied as an effective life management method because it makes concrete more durable against the aging factors, such as chloride ion, carbonation, freezing-thawing, and compound aging.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.47-54
• /
• 2018

Concrete undergoes various deterioration on surface. Impregnant with silicate is usually applied to concrete surface and forms insoluble hydrates, which can provide many engineering advantages. In the work, concrete impregnated with colloidal silicate is used for durability enhancement in surface and self-clearing performance is evaluated with photocatalyst-$TiO_2$ spraying. For the work, various tests are performed both for strength evaluation and durability evaluation such as absorption ratio, drying shrinkage, chloride penetration, sulfate resistance, and freezing/ thawing action. Furthermore, removal and self-clearing performance are evaluated with Acetaldehyde decomposition and Methylene blue decolorization. Through silicate impregnation and photocatalyst spraying, the impregnated concrete can have not only durability enhance but also self-clearing performance.

• Cross-Cultural Studies
• /
• v.49
• /
• pp.33-58
• /
• 2017

As a living space, house constitutes a good part of inhabitants' life, making the rhythm of life. This rhythm tends to be reflected into the house, establishing a sort of intercommunications between the house and its inhabitants. Becoming a living element, the house can endow the writer with literary resources. It is interrelated with its inhabitants. Thus, Duras' work preserves many invisible and fusional traces of links between her characters and the house. With her writing, the house displays important traces of life, with which a body of meaning is to be formed. It implies habits, imprints, links, and so on. Here, its projection into the imaginary also takes place for our writer. With this perspective in view, Duras is supposed to objectify her characters as physical and imaginary bodies. This introduces the passage from the real to the imaginary and vice versa. Unknown stories hidden behind the living places can come to manifest themselves through her writing.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.3
• /
• pp.150-155
• /
• 1999

The Electrochemical stabilities of the Brewer-Engel type intermetallic compounds of Co-Mo $(35 wt\%)$ and Ni-Mo$(35 wt\%)$ manufactured by the arc-melting method for the hydrogen electrode of $H_2-O_2$ alkaline fuel cell were investigated. Effects of temperature and concentration on the electrochemical behavior of the electrodes in the $80^{\circ}C$ 6 N KOH solution deaerated with $N_2$ gas were studied by electrochemical methods. The effect of overpotential on the electrochemical stabilities of Co-Mo and Ni-Mo intermetallic compounds was also discussed under the normal operation condition of AFC. It was shown that Co-Mo electrode had lower electrochemical stability as compared to Ni-Mo. In the case of Co-Mo electrode, a simultaneous dissolution of cobalt and molybdenum has occurred at low anodic overpotential form equilibrium hydrogen electrode potential, but the dissolution of cobalt was serious, and Co(OH)l layer on the electrode surface formed at the high anodic overpotential. In contrast the Ni-Mo electrode had high electrochemical stability because formation of the dense and thin protective $Ni(OH)_2$ layer prevented the dissolution of molybdenum.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.55-85
• /
• 1996

지르코니아 분말은 ZrO2 결정상이 온도변화에 따라 부피변화를 수반하는 상전이변태를 나타낸다. 단사정 ZrO2가 110$0^{\circ}C$에서는 정방정으로, 2$700^{\circ}C$ 내외에서는 입방정으로 결정구조가 가역적으로 변한다. 이 ZrO2에 금속산화물을 고용시키면 형석 (CaF2:Florite)형의 입방정 결정구조가 실온에서도 안정하게 존재하게 된다. 안정화제 산화물은 caO, MgO등 2가 산화물외에 3가 또는 4가의 금속산화물로서 Sc2O3, Y2O3, Sm2O3, Nd2O3, Gd2O3, Y2O3, CeO2 등이며 이들은 금속이온의 원자가가 변하기 쉬운 희토류 산화물이다. 안정화 지르코니아는 형석형 결정구조이며 결정화학적으로 보면 금속양이온이 산소이온에 대해서 정육면체형의 8배위를 하고 있다. 이때 이온반경비(양이온/음이온)에 따라 Zr+4자리와 O-2자리의 격자위치와 모양이 형성되므로 비틀어진 정육면체구조이건 이상적인 정육면체 형석구조를 이룬다. 이는 지르코니아의 결정상의 2상-3상인 부분안정화 지르코니아다결정체(PSZ : partially stabilized zirconia)이거나 단일상-2상인 정방정 지르코니아다결정체(TZP : tetragonal zirconia polycrystal)의 결정구조를 가지는데 기인한다. PSZ는 주로 MgO, CaO를 안정화제로 고용시켜 입방정 영역에서 소결하고 이를 다시 입방정과 정방정의 상 영역에서 열처리하여 입방정 입자내부에 정방정을 석출 형성시킨 것이며 TZP는 Y2O3 및 CeO2를 고용시켜 PSZ와 다르게 일반적인 상압소결한 정방정 결정상의 미립자이다. 산화지르코늄 분말은 지르콘사에서 열분해시킨 지르코늄소결.융해괴(caustic fusion clinker)를 산처리하여얻어진 지르코늄산용액(zirconyl acid solution : cloride, sulfide, nitride 등)으로부터 제조된다. 고순도 산화지르코늄은 용액 결정석출법에 의해 ZrOCl2.8H2O, 5ZrO2.3SO3.15H2O, ZrO(NO3)2.xH2O 등의 지르코늄 수화물만을 재결정화시킨 것으로부터 얻을 수 있으며 이 지르코늄염 수용액으로부터 입자미세구조를 효과적으로 제어하여 산화지르코늄 및 안정화 지르코니아 분말제조가 가능하다. 안정화 지르코니아 분말은 ZrO2와 안정화산화물의 고용을위하여 가열처리를 필요로 하며 일정온도에서 최적상태로 숙성하므로서 2가지 상(phase) 이상의 고용체를 가지게 된다. 안정화 지르코니아 분말은 고용처리온도를 낮추고 효과적으로 생성시키기 위해서는 지르코늄 및 안정화제염을 혼합하고 습식 직접합성하여 저온에서 고용체의 합해진상 영역을 생성시키는 것이다. 이는 지르코니아 원료분말의 미세구조를 제어하므로서 가능하며 이때 화학성분조성과 크기형태가 균일하게 분포된 입자분말을 얻을 수 있다.