• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.73-73
• /
• 2012

본 연구에서는 리싸이클 방법에 따른 리싸이클 폴리에스터사의 물리적 성질을 고찰하고자 하였다. 시료로는 물리적 리싸이클 방법과 화학적 해중합을 통한 리싸이클 방법을 사용한 폴리에스터사를 사용하였다. 리싸이클 폴리에스터사의 표면 형상을 관찰하기 위해 SEM을 이용하였고, 열적 거동을 규명하기 위해 DSC를 이용하였으며, 미세 구조적 차이를 살펴보기 위해 XRD 분석을 하였고, 역학적 성질을 평가하기 위해 인장강도와 절단신도를 측정하였다. 연구 결과, 리싸이클 방법에 따라 Tg, 결정화 온도, 융점과 융해열은 약간의 차이를 보였다. 화학적 리싸이클 PET사는 Virgin PET사보다 Tg가 약간 상승하였고, 승온 시 결정화 온도는 하강하였으며, 융점의 차이는 거의 없는 것으로 나타났다. 이는 해중합에 의해 PET의 비결정영역의 고분자 사슬 간의 거리가 좁아져 더 높은 Tg를 나타내는 것으로 생각된다. 또한, 물리적 리싸이클 PET사의 융점과 융해열은 화학적 리싸이클 PET사의 융점과 융해열보다 더 높게 나타났다. 결정화도에서는 리싸이클 방법에 따른 차이는 거의 보이지 않았다. 이는 리싸이클 공정이 폴리에스터의 결정영역 변화에는 유의한 영향을 미치지 않았기 때문인 것으로 생각된다. 실의 인장강도는 리싸이클 PET사는 virgin PET사보다 약간 더 낮았고, 물리적 리싸이클 PET사와 화학적 리싸이클 PET사는 비슷하게 나타났고, 절단신도는 virgin PET사, 물리적 리싸이클 PET사와 화학적 리싸이클 PET사 간의 뚜렷한 차이는 없는 것으로 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.1
• /
• pp.36-44
• /
• 1995

Melting characteristics of unrestrained liquid ice in a rectangular vessel with heated top wall were investigated experimentally. The liquid ice, a mixture of ice particles and ethylene-glycol aqueous solution, was adopted as a testing material. During the melting process the liquid ice was drawn by buoyancy to the heated top wall of the rectangular vessel where close-contact melting occured. The melting behavior and melting rate of the liquid ice as well as local/mean heat-transfer coefficient at the heated top wall were observed and measured under a variety of conditions of heat flux and various initial concentration of the aqueous binary solution. It was found that the heat transfer of the heated top wall is remarkably promoted by the close-contact melting, and that the dendritic frozen layer at the lower interface of the liquid ice is formed. Photographic evidence demonstrated that plumes containing solute-rich liquid issued from isolated chimneys within the liquid ice layer where segregation of interstitial channel took place.

• 레미콘
• /
• no.10 s.73
• /
• pp.2-12
• /
• 2002

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.12
• /
• pp.1223-1229
• /
• 2001

Though conventional calorimetry methods such as differential scanning calorimetry (DSC) and differential thermal analysis (DTA) are used generally in measuring heat of fusion, T-history method has the advantages of a simple experimental apparatus and no requirements of sampling process, which is particularly useful for measuring thermal properties of inhomogeneous phase change materials (PCMs) in sealed tubes. However, random criteria (a degree of supercooling) used in selecting the range of latent heat release and neglecting sensible heat during the phase change process can cause significant errors in determining the heat of fusion. In the present study, it was shown that a 40% discrepancy exists between the original T-history and the present methods when analyzing the same experimental data. As a result, a reasonable modification to the original T-history method is proposed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.8
• /
• pp.652-660
• /
• 2003

T-history method, measuring heat-of-fusion of phase change material (PCM) in sealed tubes, has the advantages of a simple experimental device and no requirements in sampling process. However, a degree of supercooling used in selecting the range of latent heat release and neglecting sensible heat during the phase change process can cause significant errors in determining the heat of fusion in the original method, which has been improved in order to predict better results by us. In the present study, the modified method was applied to a variety of PCM such as paraffin and lauric acid having very small or no supercooling with a satisfactory precision. Also the selection of inflection point and temperature measurement position was fumed out not to affect the accuracy of heat-of-fusion significantly. As a result, the method can provide an appropriate means to assess a new developed PCM by cycle test even if a very accurate value cannot be obtained.

• 대한생식의학회:학술대회논문집
• /
• 2001.06a
• /
• pp.68.2-69
• /
• 2001

• Journal of the Korean Geotechnical Society
• /
• v.29 no.1
• /
• pp.81-92
• /
• 2013

This paper presents the results of a numerical investigation into the behavior of retaining wall subject to cycles of freezing and thawing due to seasonal temperature change. The thermo-hydro-mechanical coupled finite element modeling strategy was first established to simulate the wall behavior. A series of finite element analyses were then performed on a range of conditions representing seasonal temperature change characteristics. The results indicated that the average freezing temperature and the number of cycles of freezing and thawing were the primary influencing factors for the wall behavior. Also revealed was that the duration of freezing period does not significantly affect the wall displacement and the lateral earth pressure, and that the earth pressure on the wall does not significantly change due to the freezing and thawing action suggesting that the increase in the wall displacement during the freezing and thawing action may be attributed to degradation of backfill due to the freezing and thawing action.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.8-14
• /
• 2008

The effects of calcium type catalysts addition on the thermal decomposition of low density polyethylene (LDPE) and ethylene vinyl acetate (EVA) resin have been studied in a thermal analyze. (TGA, DSC) and a small batch reactor. The calcium type catalysts tested were calcinated dolomite, lime, and calcinated oyster shell. As the results of TGA experiments, pyrolysis starting temperature for LDPE varied in the range of $330{\sim}360^{\circ}C$ according to heating rate, but EVA resin had the 1st pyrolysis temperature range of $300{\sim}400^{\circ}C$ and the 2nd pyrolysis temperature range of $425{\sim}525^{\circ}C$. The calcinated dolomite enhanced the pyrolysis rate in LDPE pyrolysis reaction, while the calcium type catalysts reduced the pyrolysis rate in EVA pyrolysis reaction. In the DSC experiments, addition of calcium type catalysts reduced the melting point, but did not affect to the heat of fusin. Calcinated dolomite reduced 20% of the heat of pyrolysis reaction. In the batch system experiments, the mixing of calcinated dolomite and lime enhanced the yield of fuel oil, but did not affect to the distribution of carbon numbers.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.13-22
• /
• 2008

The initiation and growth processes of cyclic ice body in porous systems are affected by the thermo-physical and mass transport properties, as well as gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and the deterioration by the accumulated damages are hard to identify in tests. In order to predict the accumulated damages by cyclic freeze-thaw, a regression analysis by the response surface method (RSM) is used. The important parameters for cyclic freeze-thawdeterioration of concrete structures, such as water to cement ratio, entrained air pores, and the number of cycles of freezing and thawing, are used to compose the limit state function. The regression equation fitted to the important deterioration criteria, such as accumulated plastic deformation, relative dynamic modulus, or equivalent plastic deformations, were used as the probabilistic evaluations of performance for the degraded structural resistance. The predicted results of relative dynamic modulus and residual strains after 300 cycles of freeze-thaw show very good agreements with the experimental results. The RSM result can be used to predict the probability of occurrence for designer specified critical values. Therefore, it is possible to evaluate the life cycle management of concrete structures considering the accumulated damages due to the cyclic freeze-thaw using the proposed prediction method.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.83-83
• /
• 2003

돼지 난자의 유리화 동결 처리 방법 중 난자를 담는 용기(loading vessel)의 재료로 최근에 알려진 것으로 open-pulled straws(OPS)[Vajta등, Mol Reprod Dev, 51:53-58, (1998)], electron microscope grids(EMG) [Martino등,Biol Reprod, 54:1059-1069, (1996)〕, nylon loop system(NLS) [Lane등, Fertil Steril,72: 1073-1078, (1999)] 등이 보고되고 있다. OPS는 1/4cc straws를 열을 가하여 길게 뽑아 내벽을 얇게 함으로써 filing된 난자나 수정란이 액체 질소와 접촉했을 때 유리화가 신속하게 되도록 하는 방법으로 돼지에서는 별로 보고된 것이 없다. EMG는 열전도가 예민한 전자현미경용 copper grid를 이용한 방법으로 최근 국내 기술진의 연구성적을 포함한 몇몇 학자들에 의하여 보고되었고 NLS는 0.5mm직경의 nylon loop를 이용하여 급속 동결한 성적이 보고되었으나, 돼지 난자에 응용 된 것은 없다. 따라서 이와 같은 동결 재료는 사람과 반추류, mouse외에 돼지 난자에 대하여는 전혀 시도되지 않았지만 유리화 동결기술에서 가장 중요한 실험으로 생각된다. 성공적인 유리화 동결을 위해서는 수정란이 냉각의 전도성이 빠르고, 작은 용액을 수정란과 같이 filling해야 하며 모든 동작이 신속 간편해야 하며 융해 방법도 초급속도의 융해가 요구되므로 이에 부합되어야 한다. 연구 목적은 돼지 난자를 유리화 동결/융해 시 동결 재료-straw/glass, copper grid, nylon 3가지에 대한 제작 방법, 난자 loading, 동결 처리, 보관 방법, 융해 방법 등을 난자의 회수, 수정 후 생존율을 비교 조사하여 가장 우수한 방법을 선택할 목적이었다. 수행 내용은 3가지의 재료의 sample을 제작하고 소독한 다음 준비된 돼지 COCs을 40시간동안 IVM한 후 난자를 5~l5개 정도로 선정 하여 준비된 VS 용액에 평형처리 하였다. 각 재료의 용기에 loading 한 후 동결/보관하였고, 융해는 역순으로 평형하여 maturation 배지에 3~4시간 배양한 다음 경검하고 IVF한 후 NCSU-23 배지에 담아 IVC 배양하면서 cell cleavage상태를 확인하였다.