• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.1
• /
• pp.29-35
• /
• 2016

This paper presents an analysis of the short-range radar noise adjusting the angle of the radar reflector for the handicapped aids and suggests a complementary filter that combines a moving average filter with a heuristic algorithm to remove the radar noise. It also shows the effectiveness of the suggested filter by comparing the experiments results between the Kalman filter and the suggested filter.

• Journal of the Korea Convergence Society
• /
• v.7 no.3
• /
• pp.77-85
• /
• 2016

We propose a digital signal processing technic that can compensate the non-linearity inherent in audio amplifiers, and present the result of the simulation. The inherent non-linearity of the audio power amplifier arising from analog devices is compensated via a digital signal processing technic consisting of indirect learning architecture and an adaptive filter. The simulation results show that the compensator can be realized using a third-order polynomial and compensates odd-order non-linearity efficiently. The even-oder non-linearity is mainly due to the dc offset at the output, which is difficult to eliminate with the proposed method. Care must be taken in designing the bias circuit to avoid the DC offset at the output. The proposed technic has significance in that digital signal processing technic can compensate for the impairment that is an inherent characteristic of an analog system.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.31-36
• /
• 2019

Music therapy, a field that convergence music and treatment, which play a fundamental role in personality formation, possesses diverse and complex treatment methods. Music therapists in charge of music therapy may experience the same phenomenon as countertransference in consultation with clients. In addition, experiencing psychological burnout, there are many difficulties in reaching the final goal of music therapy. In this paper, we provide a collaborative filtering-based music therapy consultation data recommendation model for smooth music therapy consultation with clients who visited for music therapy. The proposed model grasps the similarity between the conventional consultation data and the new consultant data through the euclidean distance algorithm. This is to recommend similar consultation materials. Since music therapists can provide optimal consultation materials for consultants who need music therapy, smooth consultation is expected.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.4
• /
• pp.209-215
• /
• 2020

In this paper, we propose an algorithm for segmenting weld bead images using edge enhancement and active contours. In the proposed method, high-frequency filtering and contrast improvement are performed for edge enhancement, and then, by applying the active contour method, only the weld bead region can be obtained. The proposed algorithm detects an edge through high-frequency filtering and reinforces the detected edge by using contrast enhancement. After the edge information is improved in this way, the weld bead area can be extracted by applying the active contour method. The proposed algorithm shows better performance than the existing methods for segmenting the weld bead in the image. For the objective reliability of the proposed algorithm, it was compared with the existing high pass filtering methods, and it was confirmed that the welding bead segmentation of the proposed method is excellent. The proposed method can be usefully used in evaluating the quality of the weld bead through an additional procedure for the segmented weld bead.

• Tribology and Lubricants
• /
• v.39 no.4
• /
• pp.133-138
• /
• 2023

This paper presents a discussion on lubricating oil filters. The maintenance of lubricating oil filters can improve the performance of mechanical systems and extend the service life of the lubricating oil. Therefore, the effective management of the lubricating oil can extend the service life of the machine and reduce maintenance costs. A representative method for managing lubricating oil is filtering the lubricating oil using a lubricant filter. However, effectively managing a lubricating oil using a lubricant filter requires an understanding of the related knowledge. In this paper, we present the definition, classification, characteristics, specifications, performance, and self-cleaning function of lubricating oil filters. The lubricant filters are classified based on the filter material, filtering method, filtering location, and amount of filtered fluid. Cellulose and glass fiber materials are conventionally used as materials for lubricant filters, and recently, metal materials, which show excellent durability, are being increasingly adopted. The filtering methods can be classified into physical, chemical, magnetic, and electric field methods, and the lubricant filters can be classified according to their location in the lubrication system. The beta ratio and efficiency of the lubricant filter can be determined based on the performance of the filter. Finally, there are many products or technologies that add a self-cleaning function to the filter to remove foreign substances or contaminants for efficient management.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.1
• /
• pp.25-40
• /
• 2023

Recommendation systems are frequently used by users to generate intelligent automatic decisions. In the study of movie recommendation system, the existing approach uses largely collaboration and content-based filtering techniques. Collaborative filtering considers user similarity, while content-based filtering focuses on the activity of a single user. Also, mixed filtering approaches that combine collaborative filtering and content-based filtering are being used to compensate for each other's limitations. Recently, several AI-based similarity techniques have been used to find similarities between users to provide better recommendation services. This paper aims to provide the prospective expansion by deriving possible solutions through the analysis of various existing movie recommendation systems and their challenges.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.272-279
• /
• 2021

A pump-type eDNA filtering system that can control voltage and hydraulic pressure respectively has been developed, and applied a filter case that can filter out without damaging the filter. The filtering performance of the developed system was evaluated by comparing the eDNA concentration with the conventional vacuum-pressured filtering method at the catchment conduit intake reservoir. The developed system was divided into a voltage control (manual pump system) method and a pressure control (automatic pump system) method, and the pressure was measured during filtering and the pressure change of each system was compared. The voltage control method started with 65 [KPa] at the beginning of the filtering, and as the filtering time elapsed, the amount of filtrate accumulated in the filter increased, so the pressure gradually increased. As a result of controlling the pressure control method to maintain a constant pressure according to the designed algorithm, there was a difference in the width of the hydraulic pressure fluctuation during the filtering process according to the feedback time of the hydraulic pressure sensor, and it was confirmed that the pressure was converged to the target pressure. The filtering performance of the developed system was confirmed by measuring the eDNA concentration and comparing the voltage control method and the hydraulic control method with the control group. The voltage control method obtained similar results to the control group, but the hydraulic control method showed lower results than the control group. It is considered that the low eDNA concentration in the hydraulic control method is due to the large pressure deviation during filtering and maintaining a constant pressure during the filtering process. Therefore, rather than maintaining a constant pressure during filtering, it was confirmed that a voltage control method in which the pressure is gradually increased as the filtrate increases with the lapse of filtering time is suitable for collecting eDNA. As a result of comparing the average concentration of eDNA in lentic zone and lotic zone as a control group, it was found to be 96.2 [ng µL^-1] and 88.4 [ng µL^-1l], respectively. The result of comparing the average concentration of eDNA by the pump method was also high in the lentic zone sample as 90.7 [ng µL^-1] and 74.8 [ng µL^-1] in the lentic zone and the lotic zone, respectively. The high eDNA concentration in the lentic zone is thought to be due to the influence of microorganisms including the remaining eDNA.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.23-31
• /
• 2020

The need for personalized recommendation is growing due to convenient access and various types of items due to the development of information communication and smartphones. Weather and weather conditions have a great influence on the decision-making of users' places and activities. This weather information can increase users' satisfaction with recommendations. In this paper, we propose a collaborative filtering-based place recommendation system using living index by utilizing living index of users' location information on mobile platform to find users with similar propensity and to recommend places by predicting preferences for places. The proposed system consists of a weather module for analyzing and classifying users' weather, a recommendation module using collaborative filtering for place recommendations, and a management module for user preferences and post-management. Experiments have shown that the proposed system is valid in terms of the convergence of collaborative filtering algorithms and living indices and reflecting individual propensity.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.85-94
• /
• 2006

Image fusion techniques are widely used to integrate a lower spatial resolution multispectral image with a higher spatial resolution panchromatic image. However, the existing techniques either cannot avoid distorting the image spectral properties or involve complicated and time-consuming decomposition and reconstruction processing in the case of wavelet transform-based fusion. In this study a simple spectral preserve fusion technique: the Smoothing Filter-based Replacement(SFR) is proposed based on a simplified solar radiation and land surface reflection model. By using a ratio between a higher resolution image and its low pass filtered (with a smoothing filter) image, spatial details can be injected to a co-registered lower resolution multispectral image minimizing its spectral properties and contrast. The technique can be applied to improve spatial resolution for either colour composites or individual bands. The fidelity to spectral property and the spatial quality of SFM are convincingly demonstrated by an image fusion experiment using IKONOS panchromatic and multispectral images. The visual evaluation and statistical analysis compared with other image fusion techniques confirmed that SFR is a better fusion technique for preserving spectral information.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.2
• /
• pp.53-58
• /
• 2021

In this paper, an alternative finite memory structure(FMS) smoothing filter is developed for discrete-time state-space model with a control input. To obtain the FMS smoothing filter, unbiasedness will be required beforehand in addition to a performance criteria of minimum variance. The FMS smoothing filter is obtained by directly solving an optimization problem with the unbiasedness constraint using only finite measurements and inputs on the most recent window. The proposed FMS smoothing filter is shown to have intrinsic good properties such as deadbeat and time-invariance. In addition, the proposed FMS smoothing filter is shown to be equivalent to existing FMS filters according to the delay length between the measurement and the availability of its estimate. Finally, to verify intrinsic robustness of the proposed FMS smoothing filter, computer simulations are performed for a temporary model uncertainty. Simulation results show that the proposed FMS smoothing filter can be better than the standard FMS filter and Kalman filter.